m607a11/017ac美国pcb转接头加线缆
platinum stock products; lowprofile industrial icp® accel, 100 mv/g, 0.5 to 10k hz, side exit,10-ft integral cable & swiveler base, single point iso 17025accredited calibration
us patent number 6.435.902.
sensitivity: (±15%) 100 mv/g (10.2 mv/(m/s²))
frequency range: (±3db) 30 to 600000 cpm (0.5 to 10000 hz)
sensing element: ceramic
measurement range: ±50 g (±490 m/s²)
weight: 1.1 oz (31 gm)
performancesensitivity (±15 %)100 mv/g10.2mv/(m/s²)[1] measurement range±50 g±490 m/s²
frequency range (±3 db)30 to 600000 cpm0.5 to 10000 hz
resonant fre kcpm25 khz[3] broadband resolution (1to 10000 hz)350 µg3434 µm/sec2[3] non-linearity±1%±1 %[2] transverse sensitivity≤7 %≤7 %
environmentaloverload limit (shock)5000 g pk49050 m/s² pk
temperature range-65 to +250 °f-54 to +121 °c
temperature responsesee graph %/°fsee graph %/°f[3] enclosureratingip68ip68
electricalsettling time (within 1% of bias)≤2 sec≤2 sec
discharge time constant≥0.3 sec≥0.3 sec
excitation voltage18 to 28 vdc18 to 28 vdc
constant current excitation2 to 20 ma2 to 20 ma
output impedance<150 ohm<150 ohm
output bias voltage8 to 12 vdc8 to 12 vdc
spectral noise (10 hz)8 µg/√hz78.5(µm/sec2)/√hz[3] spectral noise (100 hz)5µg/√hz49.1 (µm/sec2)/√hz[3] spectral noise (1khz)4 µg/√hz39.2 (µm/sec2)/√hz[3] electricalisolation (case)>100000000 ohm>100000000 ohm
physicalsize - hex9/16 in14 mm
size - height0.97 in24.6 mm
weight (without cable)1.1 oz31 gm[7] mountingstudstud
mounting thread1/4-28 male1/4-28 male[5] mounting torque(stud)3 to 4 ft-lb4.1 to 5.4 nm[6][8] mounting torque (hexnut)2 to 3 ft-lb2.7 to 4.1 nm
sensing elementceramicceramic
sensing geometryshearshear
housing materialstainless steelstainless steel
sealingwelded hermeticwelded hermetic
electrical connectormolded integral cablemolded integral cable
electrical connection positionsideside
cable length10 ft3.0 m
cable typepolyurethanepolyurethane[4]
all specifications are at room temperature unless otherwisespecified.
product notes
[1] conversion factor 1g = 9.81 m/s².
[2] zero-based,uares, straight line method.
[3] typical.
[4] twisted shielded pair.
[5] 1/4-28 has no e in s.i. units.
[6] stud torque must exceed sensor hex nut torque to ensure properdismantling.
[7] measured with mounting stud.
[8] 1/8" hex allen key required for english version, 3mm hex allenkey required for metric version.
[9] see pcb declaration of conformance ps023 or ps060 fordetails.
accessories:
supplied080a156mounting base(1)
ics-2nist-traceable single-point amplitude response calibration at6000 cpm (100 hz) for each axis(1)
optional versions:
(ex) hazardous area approval- contact factory for specificapprovals
englishsi hazardous area approvaleex nl iict4, -40°c<=ta<=121°c, ii 1 g hazardousarea approvalcl i, div i, groups a, b, c, d; cl ii, div i, groupse, f, g; cl iii, div i hazardous areaapprovalcl i, div 2, groups a, b, c, d; exnl iic t4, aexna iict4 hazardous area approvalex ia iic t4,aexia iic, t4 hazardous area approvaleex nliic t4, -40°c<=ta<=121°c, ii 3 g
(m) metric mount
englishsi
accessories:
m080a159aaccessory for imi sensors product(1)
(to) temperature output
englishsi temperature output range+36 to+250 °f+2 to +121 °c temperature scalefactor5.56 mv/°f + 32+10 mv/°c electricalconnections (white)temperatureoutput electrical connections(red)acceleration output electricalconnections (black)ground electricalconnectormolded integral cable
M607A11/017AC美国PCB转接头加线缆