039237-50051美国pcb厂家配置model: 039237-50051/b
rotary torque angle transducer, w/auto-id, 50 lbf-ft (68 nm),3/8-inch square drive, 10-pin pt receptacle
measurement range: (full scale capacity) 50 lbf-ft(68 nm)
sensitivity: (output at rated capacity) 2.0 mv/v(2.0 mv/v)
non-linearity: <=0.25 % fs
maximum speed: 2500 rpm
performancemeasurement range (full scale capacity)50 lbf-ft68nm
sensitivity (output at rated capacity)2.0 mv/v2.0mv/v[3] non-linearity≤0.25 % fs≤0.25 %fs[1] hysteresis≤0.25 % fs≤0.25 %fs[1] non-repeatability≤0.05 % fs≤0.05 %fs[1] interchangeabilty≤0.30 % fs≤0.30 %fs[1][2] environmentaloverload limit75 lbf-ft101 nm
temperature range (operating)0 to +200 °f-18 to +93 °c
temperature range (compensated)+70 to +150 °f+21 to +66 °c
temperature effect on output (maximum)±0.002 %reading/°f±0.0018%reading/°c[4] temperature effect on zero balance(maximum)±0.002 %fs/°f±0.0018 %fs/°c[4] electricalbridgeresistance350 ohm350 ohm
excitation voltage10 vdc10 vdc[5] insulation resistance≥5gohm≥5 gohm
zero balance≤2 % fs≤2 % fs[1] counts perrevolution14721472[7] resolution w/ /4 °1/4°[7] output voltagehigh 5v to low 0.5vhigh 5v to low0.5v[7] power required (maximum)5 vdc @ 120ma5 vdc @120ma[7] magnetic encoder (poles)360360[7] magneticencoder (ouput)see notesee note[6][7] shunt calibration≤0.25 %fs≤0.25 % fs[1][8] auto idttl proprietaryttl proprietary
physicalsize - shaft length3.23 in82.0 mm[10] size - housinglength2.30 in58.4 mm[10] size - housing height2.00 in50.8mm[10] weight.85 lb386 gm
mounting3/8 inch s mm sq drive[9] sensingelementstrain gagestrain gage
housing materialaluminumaluminum
shaft materialsteelsteel
electrical connectorpt02h-12-10ppt02h-12-10p
maximum speed2500 rpm2500 rpm
all specifications are at room temperature unless otherwisespecified.
product notes
[1] fs - full scale.
[2] matched for mv/v and shunt calibration.
[3] matched to ±0.25% f.s.
[4] over compensated temperature range.
[5] calibrated at 10 vdc, usable 5 to 20 vdc or vac rms.
[6] a-b track 90° phase difference, flat over operating speed
[7] magnetic encoder specifications.
[8] matched with 43.575 kohm precision resistor.
[9] per ansi b107.4 specifications
[10] see outline drawing lt38037 for complete dimensions
[11] see pcb declaration of conformance ps119 for details.
accessories:
optional080920-01000
(1)
080962-01000model 962 data recorder(1)
097000-34445interconnect cable(1)
4242r-000630mating connector pt06a-12-10s(sr)(1)
supplied7122r-04352aprecision cal resistor 43.575 kohm(1)
model: m039237-50051
rotary torque angle transducer, w/auto-id, 68 nm, 3/uare drive, 10-pin pt receptacle, calibrated in nm.
performancemeasurement range (full scale capacity)50 lbf-ft68nm
sensitivity (output at rated capacity)2.0 mv/v2.0mv/v[3] non-linearity≤0.25 % fs≤0.25 %fs[1] hysteresis≤0.25 % fs≤0.25 %fs[1] non-repeatability≤0.05 % fs≤0.05 %fs[1] interchangeabilty≤0.30 % fs≤0.30 %fs[1][2] environmentaloverload limit75 lbf-ft101 nm
temperature range (operating)0 to +200 °f-18 to +93 °c
temperature range (compensated)+70 to +150 °f+21 to +66 °c
temperature effect on output (maximum)±0.002 %reading/°f±0.0018%reading/°c[4] temperature effect on zero balance(maximum)±0.002 %fs/°f±0.0018 %fs/°c[4] electricalbridgeresistance350 ohm350 ohm
excitation voltage10 vdc10 vdc[5] insulation resistance≥5gohm≥5 gohm
zero balance≤2 % fs≤2 % fs[1] counts perrevolution14401440[7] resolution w/ /4 °1/4°[7] output voltagehigh 5v to low 0.5vhigh 5v to low0.5v[7] power required (maximum)5 vdc @ 120ma5 vdc @120ma[7] magnetic encoder (poles)360360[7] magneticencoder (ouput)see notesee note[6][7] shunt calibration≤0.25 %fs≤0.25 % fs[1][8] auto idttl proprietaryttl proprietary
physicalsize - shaft length3.23 in82.0 mm[10] size - housinglength2.30 in58.4 mm[10] size - housing height2.00 in50.8mm[10] weight.85 lb386 gm
mounting3/8 inch s mm sq drive[9] sensingelementstrain gagestrain gage
housing materialaluminumaluminum
shaft materialsteelsteel
electrical connectorpt02h-12-10ppt02h-12-10p
maximum speed2500 rpm2500 rpm
039237-50051美国PCB厂家配置