保温齿轮泵RCB3输送乳化沥青泵

输送乳化沥青泵rcb3/0.36流量:3m3/h,压力:0.36mpa,吸入真空高度:3米,口径:25,配电机:y100l-6

  rcb沥青保温泵分为普通与铸钢两种材质，均带有保温夹套，保温泵适用于常温下有凝固性或结晶而通过加温并保持一定温度又容易流动且有润滑性的液体，以及高寒地区室外安装和工艺过程中需要保温的场合，泵开始工作时首先预热降低了泵的起动功率。适用于输送有腐蚀性或无腐蚀性、卫生条件要求较高的液体，输送介质不含固体颗粒，温度不高于350℃，粘度为5cst——1500cst的液体，如各种化工原料、灌装医药、食品、化妆品、农药、洗涤剂、印染、酿造、树脂、胶类等行业。该泵传动方式有电机直联和减速机两种，当液体粘度超过1500cst时，应采用减速机传动。rcbasphalt heat pump can be divided into ordinary and cast steelmaterial, with thermal insulation jacket, heat pump underapplicable interesting coagulability and crystallization and byheating and maintain a certain temperature and easy flow andlubricity of liquid, in the process of the high altitude andoutdoor installation process and need to heat preservation, pumpstarts to work when the first preheating reduced the starting powerof the pump.applicable to transport corrosive or non-corrosive,health conditions to demand higher liquid, medium not containingsolid particles, the temperature is not higher than 350℃, the viscosity of liquid for 5 cst - 1500 cst,such as filling a variety of chemical raw materials,pharmaceutical, food, cosmetics, pesticide, detergent, printing anddyeing, brewing, resin, rubber and other industries.the pump driveway has two kinds of motor and deceleration machine, when more than1500 cst liquid viscosity reducer drive should beadopted.

 

   沥青保温泵的泵体设有空心夹层，并设有进出口法兰，可用于导热油、蒸气、热水、等媒体对输送的液体和泵进行加热保温及冷却该泵传动方式有电机直联和减速机两种，当液体粘度超过1500cst时，应采用减速机传动。

asphalt heat pump pumpbody has a hollow interlayer, with import and export of flange, canbe used in the thermal oil, steam, hot water, such as the media forthe transportation of liquid and pump heat insulation and coolingways there are to the pump drive motor and deceleration machinetwo, when more than 1500 cst liquid viscosity reducer drive shouldbe adopted.

 

沥青保温齿轮泵结构形式：asphaltinsulation gear pump structure:

　　泵体设有空心夹层，并设有进出口法兰，可用于导热油、蒸气、热水等媒体对输送的液体和泵进行加热保温及冷却。

pump body has a hollowsandwich, with import and export of flange, can be used in thethermal oil, steam, hot water and other media for conveying li heat insulation and cooling pump.

适用范围：scope ofapplication:

　　适用于输送无腐蚀性、不含固体颗粒、在常温下有凝固性的介质，尤其适用于高寒地区室外安装和工艺过程中介质需要保温的场合，介质温度可达250℃、粘度为5-1500cst。

 

is applicable totransport non-corrosive, not containing solid particles, at roomtemperature with coagulability medium, especially in cold areaoutdoor media need to heat preservation in the process ofinstallation and process, medium temperature can reach 250℃, the viscosity of 5 to 1500 cst.

用途说明：

　　为输送常温下变稠，凝固或结晶而维持一定温度又容易流动的介质而设计的，如沥青、石蜡、松香及性质类似的液体，温度不高于200℃。

purpose:

for transport hasthickened under normal temperature, solidification orcrystallization and maintain a certain temperature and easy flow ofmedium, such as asphalt, paraffin wax, rosin and propertiesuid, the temperature is not higher than 200 ℃.

输送表面活性剂泵g35-1v-w112单螺杆泵利华益集团股份有限公司输送山梨醇泵g50-2v-w101单螺杆泵佳通轮胎（中国）有限公司输送果葡糖浆泵g105-2p-w101单螺杆泵浙江传化集团有限公司输送化工废料渣泵g35-2v-w102单螺杆泵山东海化集团有限公司输送农药泵kcb83.3铜轮齿轮泵山东华阳农药化工集团有限公司货油泵kcb-483.3(2cy-29/0.36)浙江欧华造船有限公司输送重污油泵spf20r38g10fw21三螺杆泵 保定热电厂输送絮凝油泵g40-1v-w101单螺杆泵江苏三木集团有限公司消泡剂补充泵g70-1v-w101单螺杆泵镇江奇美化工有限公司助剂燃油泵sns940r46e6.7w21三螺杆泵广州橡胶企业集团有限公司聚氨酯填料剂发泡胶泵nyp220b-ul-t2-w11高粘度泵青岛北海船舶重工有限责任公司空预器油站用泵sns210r40u12.1w2三螺杆泵江苏新时代造船有限公司输送导热油泵sns1700r46u12.1w2三螺杆泵南通惠港造船有限公司输送太古油泵spf20r38g8.3fw21三螺杆泵新疆天业（集团）有限公司输送乳化油泵spf20r38g8.3fw21三螺杆泵潍坊弘润石化助剂有限公司输送油脂泵nyp50-ru-t2-w12高粘度泵山东东岳化工集团有限公司输送润滑油脂泵snh660r54u12.1w2三螺杆泵神马实业股份有限公司输送硅脂泵kcb-2500双星集团有限责任公司输送阻尼油泵snh80r46u12.1w2三螺杆泵无锡兴达泡塑新材料有限公司输送椰子油泵spf20r38g8.3fw21三螺杆泵宁夏宝塔石化集团有限公司输送导轨油泵spf20r38g10w21三螺杆泵山东汇丰石化集团有限公司输送防锈油泵kcb-5400翔鹭石化股份有限公司输送高温润滑脂泵snh660r46e15yw3三螺杆泵南通化工轻工股份有限公司输送按摩油泵snh5300r54e6.7w21三螺杆泵唐山三友集团有限公司输送双氧乳泵snh40r46u12.1w2三螺杆泵华峰集团有限公司