项目/item
标准/standard
测试方法/testingmethod
外观与尺寸
appearance & dimensions
外观无显著损伤,尺寸在标准范围内。
no marked defect on appearance formand dimension are within specified range.
检查电容器表面看得见的、明显的损伤。
the capacitor shall be inspected by naked for visible evidence ofdefect.
尺寸使用游标卡尺测量。
dimensions shall be measured with slide calipers.
印 字
marking
清晰易辨。
to be easily legible.
目视检查。
the capacitor shall be inspected by naked eyes.
容 量
capacitance
在误差范围内。
within specified tolerance.
容量和损耗角正切测量在25±2℃的条件下,使用1±0.1khz、1.0vrms。
the capacitance and dissipation factor shall be measured at25±2℃with 1±0.1khzand 1.0vrms.
损耗角正切
dissipation factor
0.005大。
0.005max.
试验电压
test voltage
无失效。
no failure.
在电容器两导线间施加30kvdc额定电压、充放电流50ma大,1~5秒钟无伤害。
the capacitor shall not be damage when30kvdc rated voltage withchargingcurrent 50ma max are applied between the lead wires for 1~5second.
绝缘电阻
insulation resistance
10000mω小。
10000mωmin.
绝缘电阻测试电压为额定电压(额定电压在500vdc以上使用500vdc)、充电时间为60秒。
the insulation resistance shall be measured with rated voltage (above 500vdcrated voltage tested by 500vdc) within 60±5second of charging.
温度特性
temperature characteristic
在-25至+85℃的温度范围内容量变化率在-30%~+20%/℃
capacitance change within-30%~+ 20%/℃and temperature characteristic guarantee is -25 to +85℃
温度特性测试需按照+25℃→-25℃→+25℃→+85℃→+25℃的步骤进行。
the capacitor measurement shall be made at each step specified in+25℃→-25℃→+25℃→+85℃→+25℃.