品名規格 part number 允 差 tolerance 日 期 date yl-101k-8kv ±10% 2014.04.17 产品尺寸图/shapes and dimensions 印字 marking本体颜色/body color:蓝色/blue d 6.5-6.7mm φd 0.5±0.05mm 101 8kv 备注 remark t 3.8-4.0mm c 1.2±0.5mm f 7.5±0.5mm l25mm min 项目/item 标准/standard测试方法/testing method 外观与尺寸 appearance & dimensions 外观无显著损伤，尺寸在标准范围内。no marked defect on appearance form and dimensions are withinspecified range. 检查电容器表面看得见的、明显的损伤。 the capacitor shall beinspected by naked for visible evidence of defect. 尺寸使用游标卡尺测量。dimensions shall be measured with slide calipers. 印 字 marking 清晰易辨。to be easily legible. 目视检查。 the capacitor shall be inspected bynaked eyes. 容 量 capacitance 在误差范围内。 within specified tolerance.容量和损耗角正切测量在23±2℃的条件下，使用1±0.1khz、1.0vrms。 the capacitance anddissipation factor shall be measured at 23±2℃ with 1±0.1khz and1.0vrms. 损耗角正切 dissipation factor 0.003zui大。 0.003max. 试验电压 testvoltage 无失效。 no failure. 在电容器两导线间施加12kvdc额定电压、充放电流50mazui大，1~5 秒钟无伤害。the capacitor shall not be damage when12kvdc rated voltage withcharging current 50ma max are applied between the lead wires for1~5 second. 绝缘电阻 insulation resistance 10000mωzui小。 10000mω min.绝缘电阻测试电压为额定电压(额定电压在500vdc以上使用500vdc)、充电时间为60秒。 the insulationresistance shall be measured with rated voltage (above 500vdc ratedvoltage tested by 500vdc) within 60±5 second of charging. 温度特性temperature characteristic 在-25至+85℃的温度范围内容量变化率在+500~-800ppm/℃capacitance change within+500~-800ppm/℃ and temperaturecharacteristic guarantee is -25 to +85℃温度特性测试需按照+25℃→-25℃→+25℃→+85℃→+25℃的步骤进行。 the capacitor measurementshall be made at each step specified in +25℃→-25℃→+25℃→+85℃→+25℃.
高压电容，超高压电容，陶瓷电容，电容，8kv，101
