test item 测试名称：ceramic plumbingfixtures 陶瓷卫浴装置
norm refer涉及标准：csab45.1
testinfo 测试内容： clausetest re re 一般要求4.1dimensions and tolerances 尺寸和偏差4.1.1thickness 厚度4.1.2tolerances 偏差4.2glazing 釉面4.3waste fitting openings,drainage, andoverflows 排水以及溢流装置4.3.1waste fitting openings and drainage排水口4.3.2overflows 溢流口4.4off-the-floor plumbing fixture supports卫浴悬空安装系统4.5non-vitreous ceramic plumbing fixtures非瓷陶瓷装置4.6additional res for water closets座便器的附加要求4.7additional res for urinals小便器的附加要求5.1general 一般要求5.2gravity flush tanks 重力冲洗水 flushing devices 压力冲洗设备5.4plastic water closet tanks 塑料冲洗水 components of electro-hydraulicwater closet 带电的座便器5.6dual-flush water closet 双冲座便器 （asme a112.19.14)6tests 测试6.1absorption test 吸水率6.2crazing test 龟裂测试6.3surface examination 表面评估6.4warpage test 变形量6.5field-installed flange test 法兰测试6.7structural integrity tests forwall-mounted plumbing fixtures 挂壁式卫浴的整体结构6.9joint seal test 接缝密封测试6.1auger test 螺丝钻测试6.11condensation-free (insulated) tank test绝缘水箱测试7water closet tests 座便器测试7.1general 一般要求7.2trap seal depth determination test水封测试7.3trap seal restoration test 水封恢复测试7.4water consumption test 用水量测试7.5granule and ball test 颗粒和球体试验7.6surface wash test 表面冲洗试验7.7mixed media test 混合介质试验7.8drain line transport characterization test排水管道输送特性7.9overflow test for gravity flush tanks重力冲洗水箱的溢流测试8urinal test 小便器测试8.1general 一般要求8.2test apparatus and general instructions测试设备和说明8.3trap seal depth determination test水封测试8.4surface wash test 表面冲洗试验8.5dye test 染色试验8.6water consumption test 用水量测试8.7tests for non-water-consuming urinals(asme a112.19.19) 无水小便器测试9markings, packaging, and installationinstruction and other literature 商标，包装以及安装说明sampling re: 2 set ofcompleted samples with assembly instruction (ifapplicable）3 pcs of unglazed fragmentmaterial with 3200 mm2 3 pcs of glazed fragmentmaterial with 3200 mm2 样品要求：全套样品2套并包含安装说明书（如适用） 3片3200 mm2的无釉碎片 3片3200 mm2的有釉碎片turnaround time: normal(9 working days)；express（7 working days）所需时间：标准（9个工作日）；加快（7个工作日）
sample for reference 参考图片:
sample report 报告样本：
ASME A 112.19.2