testitem 测试名称：toiletseats of moulded plastics 模压塑料的坐便圈
testinfo 测试内容： clause
testre3
material 材料3.1
plastics materials for seatsand flaps 便圈以及便盖的塑料材料 excludingthe ageing test （老化试验除外）3.2
buffermaterials 缓冲器材料3.3
materials for hingeing devicesand bolts and nuts 铰链设计以及螺栓螺帽的设计3.3.1
stainlesssteel 不锈钢3.3.2
copperalloy 铜合金3.4
washers 垫圈 (same toclause 3.3)4
design 设计5
workmanship 工艺6
dimensions 尺寸7
testre 测试要求 water absorption (non-rigidonly) 吸水率（非坚硬的样品）(for seat orcover) impactresistance 抗冲击性 （for seat orcover) rigidity (applicable to seatsmade of rigid plastic only) 坚硬度测试（适合用坚硬塑料制成的便圈） rigidity (applicable to flapsmade of rigid plastic only) 坚硬度测试（适合用坚硬塑料制成的便盖） staining by the cover orseat 被着色性9
marking 商标sampling re:3 sets of completed products withassembly instruction (if applicable）样品要求： 全套样品3套并包含安装说明书（如适用）turnaround time: normal (9 workingdays)； express（7 workingdays） 所需时间： 标准（9个工作日）；加快（7个工作日）note: rigid —plastics that have a modulus of elasticity in flexure or tensiongreater than 700 mpa.注：坚硬材料—拉伸试验的弹性模数大于700mpa的塑料。
sample for reference参考图片:
sample report报告样本：
AS 1371