核子级抛光树脂杜笙 tulsion® mb-106®up nuclear grade resin forproduction of ultra pure water 杜笙tulsion® mb-106 up是由核子级强酸型阳离子杜笙tulsion®t-46 及核子级强碱型阴离子杜笙tulsion®a-33 以1:2 体积比的剂量比例 ,预先混合的混床级离子交换树脂,专门提供给须要高纯水系统抛光用。杜笙tulsion® mb-106 up is a mixtureof strongly acidic cation resin 杜笙tulsion®t-46 in h+ form andstrongly basic anion exchange resins 杜笙tulsion® a-33 in oh- form instoichiometric e 杜笙tulsion® mb-106 up是专门用于超纯水的后段的抛光处里。杜笙tulsion®mb-106 up is designed foruse in the final polishing for production of ultra pure water.杜笙tulsion® mb-106up适合用于电子产业 ，生产半导体及映像管产业等需要超纯水的行业。具有高的交换容量及优越的物理特性。杜笙tulsion® mb-106 upis the ideal choice for electronic industries which manufacturesemi-conductors and television tubes etc. where ultra pure water isre the resin combines high capacity with excellent physicalproperties typical characteristics---------------------------------------- 基 本 特 性
tulsion® t-46(阳)tulsion® a-33(阴)型式(type)强酸性阳离子交换树脂 (strong acid cation exchange resin)强碱性阴离子交换树脂 (strong base anion exchange resin)主体结构(matrix structure)苯乙烯(cross linked polystyrene)苯乙烯(cross linked polystyrene)功能基 (functional group)硫酸基(sulfonic acid)4级胺( ammonium type i)物理性貭(physical form)球状颗粒(moist spherical beads)球状颗粒(moist spherical beads)离子型式(ionic form supplied)氢(hydrogen)氢氧(hydroxide)粒径范围(u.s.mesh in wet)16 to 5016 to 50粒度范围 (particle size)0.3 to 1.2 mm0.3 to 1.2 mm微粒含量(fines content)穿过us 50 mesh小于0.5% (less than 0.5% passing through 50u.s.mesh)穿过us 50 mesh小于0.5% (less than 0.5% passing through 50u.s.mesh)总交换容量 (total exch. capacity)1.8 meq/ml minimum of 99% in hydrogen form1.0 meq/ml minimum of 90% in hydroxide form and less than 1% inchloride formph范围 (ph range)0 to 140 to 14允许温度 (temp. stability)120°c60°c溶解率 (solubility)insoluble in all common solventsinsoluble in all common solvents溶出有机物(organic leachable)less than 0.2 mg kmno4 per ml of wet resinless than 0.2 mg kmno4 per ml of wet resin密度backwash settled densityapprox.750 gm/literapprox.750 gm/liter不纯物(impurities)fe=50 ppm(max)fe=50 ppm(max) cu=50 ppm(max)cu=50 ppm(max) pb=50 ppm(max)pb=50 ppm(max)球粒强度(bead strength)avg. not less than 500g/bead by chatillon test (astmstandard)avg. not less than 300g/bead by chatillon test (astmstandard)