高压共轨喷油器试验台
一、概述
本试验台用于柴油机高压共轨喷油器的单次、多次喷射雾化试验，还可用于柴油机常规喷油器、双弹簧喷油器的喷射试验。
1．introduction
cri-ets injector test bench is a tool forchecking the injectors used on diesel engines. it allows you totest common rail injectors and normal injectors. vision of theinjector’s spray, measure of the delivery and overflow. checking ofthe opening pressure of injectors.
二、特点
计算机控制，windowsxp操作系统，可设定存储试验参数，控制界面友好、直观。独特的消雾系统可改善工作环境。可同时试验6只喷油器。
2. characteristic
control by computer, windowsxp operating system.you can set and save test data. friendly picture allows you easilyto operate. it’s e suction system for fog. it can test 6piece injectors at the same time.
三、主要技术参数parameters
1．feeding pressure：0 – 200mpa
2．pressure gauge：feeding pressure gauge：0 – 300mpa
air gauge：0 – 1.6mpa
3．graduate:150ml/24piece
4．fuel tank：4l
5．air in：0.8mpa36l/min
6．electronical power in：ac220v/50(60)hz
四、functions
1．共轨喷油器电磁阀工作性能检查checking ofthe solenoid valve of injectors
2．共轨喷油器喷油量、回油量检查measurementof the delivery and overflow of cri
3．共轨喷油器雾化观察vision of cri injector’s spray.
4．共轨喷油器密封性检查checking of the sealing of cri
5．常规喷油器开启压力检查checking of theopening pressure of injectors.
6．常规喷油器密封性检查checking of the sealing of injectors.
7．常规喷油器雾化观察vision of the injector’s spray
五、操作说明operation introduction
1．试验台操作说明test bench
2．电脑操作说明computer
六、安装调试installing
1．接入交流220伏电源connect electronical power ac220v 50hz
2．加入试验油fill test oil
3．接入0.8mpa的压缩空气connect air
4．连接电脑与试验台connect computer to test bench
5．连接被试喷油器connect injector
6．调节供油压力
7．设定喷射参数
七、喷油器试验
1．共轨喷油器试验
2．常规喷油器试验
