PA66 A3EG10 PA66 A3EG10
- 供应商
- 东莞常虹塑胶有限公司
- 认证
- 品牌
- PA66
- 型号
- A3EG10
- 产地
- 德国巴斯夫
- 联系电话
- 13694927883
- 手机号
- 13662852115
- 联系人
- 蒋红亮
- 所在地
- 东莞市樟木头镇百果洞社区塑胶市场四期十一栋13号(注册地址)
- 更新时间
- 2021-08-10 08:00
basf pa66 ultramid a3eg10物性参数物性表
以下是basf pa66 ultramid a3eg10中英文物性表
basf ultramid® a3eg10pa66(尼龙66-聚酰胺)
the property table is providedby www.plas-cn.com, welcome to download, reprintplease indicate the source!
physical properties物理性质
metric公制数据
english英制数据
comments测试方法
bulk density密度
0.500 - 0.800 g/cc
0.0181 - 0.0289 lb/in³
1.56 g/cc
0.0564 lb/in³
iso 1183
water absorption吸水率
3.7 - 4.3 %
saturation; iso 62
moisture absorption ate吸湿平衡
1.0 - 1.4 %
23°c; 50% rh; iso 62
viscosity measurement粘度
130
iso 307
linear mold shrinkage 线性收缩率
0.0045 cm/cm
0.0045 in/in
restricted
linear mold shrinkage,flow线性收缩率/流动
0.0033 cm/cm
0.0033 in/in
iso 2577
0.0045 in/in
tm=300°c, tw=80°c
linear mold shrinkage,transverse线性收缩率/横向
0.0082 cm/cm
0.0082 in/in
iso 2577
melt flow熔体流动速率
31.2 g/10min
@load 5.00kg,
temperature 275 °c
31.2 g/10min
@load 11.0lb,
temperature 527 °f
iso 1133
mechanical properties力学性能
tensile strength,yield屈服拉伸强度
240 mpa
34800 psi
50 mm/min; iso 527-1/-2
elongation at yield屈服伸长率
2.5 %
50 mm/min; iso 527-1/-2
modulus of elasticity弹性模量
16.8 gpa
2440 ksi
iso 527-1/-2
flexural strength弯曲强度
360 mpa
52200 psi
at max force; iso 178
flexural modulus弯曲弹性模量
15.0 gpa
2180 ksi
iso 178
izod impact,notched悬臂梁缺口冲击强度 (iso)
13.0 kj/m²
@temperature23.0 °c
6.19 ft-lb/in²
@temperature73.4 °f
iso 180/a
charpy impactunnotched夏比缺口试样冲击
9.00 j/cm²
@temperature-30.0 °c
42.8 ft-lb/in²
@temperature-22.0 °f
iso 179/1eu
45.2 ft-lb/in²
@temperature73.4 °f
charpy impact, notched夏比缺口冲击
1.30 j/cm²
@temperature-30.0 °c
6.19 ft-lb/in²
@temperature-22.0 °f
iso 179/1ea
8.57 ft-lb/in²
@temperature73.4 °f
electrical properties电性能
volume resistivity体积电阻率
1.00e+13 ohm-cm
iec 60093
dielectric constant 介电常数
3.8
@frequency 1.00hz
iec 60250
dissipation factor 耗散因数
0.015
@frequency 1.00e+6hz
iec 60250
comparative trackingindex 跟踪指数
550 v
test solution a; iec 60112
thermal properties热性能
cte, linear, parallel toflow线性热膨胀系数
0.0500 - 0.200 µm/m-°c
@temperature 23.0 - 80.0 °c
0.0278 - 0.111 µin/in-°f
@temperature 73.4 - 176 °f
din 11359-1/-2
cte, linear, transverse toflow线性热膨胀系数/横向
0.500 - 0.600 µm/m-°c
@temperature 23.0 - 80.0 °c
0.278 - 0.333 µin/in-°f
@temperature 73.4 - 176 °f
din 11359-1/-2
specific heat capacity比热容
1.30 j/g-°c
0.311 btu/lb-°f
0.370 w/m-k
2.57 btu-in/hr-ft²-°f
din 52612
melting point熔点
260 °c
500 °f
din 53765
maximum service temperature,air使用温度
240 °c
464 °f
250 °c
482 °f
iso 75-1/-2
deflection temperatureat热变形温度1.8 mpa (264 psi)
250 °c
482 °f
iso 75-1/-2
decompositiontemperature分解温度
>= 310 °c
>= 590 °f
hb
@thickness 1.60mm
hb
@thickness 0.0630in
processing temperature加工温度
80.0 °c
176 °f
hopper throat
zone 1 1区
300 °c
572 °f
feed zone
zone 2 2区
300 °c
572 °f
compression
zone 3 3区
metering-zone
zone 4 4区
nozzle
melt temperature熔体温度
290 - 310 °c
554 - 590 °f
injection-molding/extrusion
optimal
mold temperature模具温度
optimal
176 - 194 °f
injection-molding
drying temperature干燥温度
80.0 °c
176 °f
4 hour
0.030 - 0.060 %
<= 0.15 %
展开全文