圣霖国际【用心服务】 800轧机厂 800轧机
- 供应商
- 鞍山市圣霖进出口贸易有限公司
- 认证
- 手机号
- 13904127277
- 销售
- 王秋
- 所在地
- 辽宁省鞍山市高新区越岭路256号(研发中心A座2号楼510室至511室)
- 更新时间
- 2020-07-13 05:19
在轧机设置了上轧辊动态轴向调整。轧机调零后,可以测量和存储上探头到上辊轴及下探头到下辊轴的距离。轧制过程中立辊如失去平衡而引起上辊或下辊的窜动,上辊会与下辊同步调整,从而保证上、下腹板对中并控制腹板和翼缘的尺寸。
there is a dynamic axialadjustment of the upper roll on the universal rolling mill. afterthe rolling mill is zero, the distance between the upper roll shaftand the lower probe can be measured and stored. during the rollingprocess,800轧机, if the neutral rolls lose balance, the upper rolleror the lower roll will move. the upper roller will synchronize withthe lower roller, so as to ensure the upper and lower platealignment and the dimensi of web and flange.
关于机械产量,800轧机厂,二十世纪七十年代后期,控制冷却技术的发展使得钢板轧制中的tmcp技术得到广泛发展。
withregard to mechanical production, the development of coolingtechnology in the late 1970s made the tmcp technology developwidely in steel plate rolling.
a lift roller of the guide in the time before and after themill,800轧机哪家好, rolling mill can ensure the correct entering. theroll system of three rolling mills is replaced synchronously withthe bearing seat, and the replacement platform is on the outside ofthe rolling line. the longest time for changing the roll is only20min. the movable side arch is locked by tension screw, and theoperation side arch is "pull-out" type, and the rolling guide isfixed on the bearing seat of the horizontal rolling mill.
展开全文