POWER SONIC蓄电池PS-1221SL配电柜

power sonic蓄电池ps-1221sl配电柜

power-sonic一直是主导力量在全球电池业务超过46年。由于我们的承诺我们公司蓬勃发展提供高质量的成本有效的电池,支持水平的服务是的。

　　我们骄傲我们的灵活性和能力迅速采取行动为市场带来新的行业产品。我们很自豪持有iso9001认证覆盖我们的组织的各个方面。

what is sulfationof batteries?
sulfation is the formation ordeposit of lead sulfate on the surface and in the pores of theactive material of the batteries' lead plates. if the sulfationbecomes excessive and forms large crystals on the plates, thebattery will not operate efficiently and may not work at all.common causes of battery sulfation are standing a long time in adischarged condition, operating at excessive temperatures, andprolonged under or over charging.

what are some ofthe major types of lead acid batteries?
batteries are divided in twoways, by application (what they are used for) and construction (howthey are built). the major applications are automotive, marine, anddeep-cycle. deep-cycle includes solar electric (pv), backup power,and rv and boat "house" batteries. the major construction types areflooded (wet), gelled, and agm (absorbed glass mat). agm batteriesare also sometimes called "starved electrolyte" or "dry", becausethe fiberglass mat is only 95% saturated with sulfuric acid andthere is no excess liquid. flooded may be standard, with removablecaps, or the so-called "maintenance free" (that means they aredesigned to die one week after the warranty runs out). all gelledare sealed and a few are "valve regulated", which means that a tinyvalve keeps a slight positive pressure. nearly all agm batteriesare sealed valve regulated (commonly referred to as "vrla" - valveregulated lead-acid). most valve regulated are under some pressure- 1 to 4 psi at sea level.

什么是电池的硫酸化？硫酸化是指在电池铅板的活性物质表面和孔隙中形成或沉积硫酸铅。如果硫酸化变成了在板上形成大的晶体，电池将不能有效地工作，甚至可能根本无法工作。电池硫酸化的常见原因是长期处于放电状态，在过高的温度下工作，在充电下或充电过久。铅酸蓄电池的几种主要类型是什么？电池分为两种方式，根据应用(它们是什么)。(用于)和构造(它们是如何建造的)。主要应用是汽车，船舶，和深循环.深层循环包括太阳能(pv)、备用电源、rv和船屋电池。。主要建筑类型有水淹(湿)、胶凝和agm(吸收玻璃垫)。agm电池有时也被称为“饥饿电解液”或“干电池”，因为玻璃纤维垫只有95%s。在硫酸下饱和，没有多余的液体。淹水可能是标准的，带有可移动的盖子，或者所谓的“免维护”(这意味着它们的设计是在战后一周内死去的)。放屁)。所有的胶都是密封的，少数是“阀门调节”的，这意味着一个微小的阀门保持一个轻微的正压力。几乎所有的agm电池都是密封阀调节的(通常是重新调整)。推测为“阀控铅酸”。大多数阀门是在一定的压力下调节的-1到4 psi在海平面。

蓄电池产品特点

1、采用紧装配技术，具有优良的高率放电性能。

2、采用特殊的设计，电池在使用过程中电液量几乎不会减少，使用寿命期间完全无需加水。

3、采用独特的耐腐蚀板栅合金、使用寿命长。

4、全部采用高纯原材料，电池自放电极小。

5、采用气体再化合技术，电池具有极高的密封反应效率，无酸雾析出，安全环保，无污染。

6、采用特殊的设计和高可靠的密封技术，确保电池密封，使用安全、可靠。

customer:

1. the client maywith our purchase contract no., and provide the damaged batteryphoto in detail, customer service by verifying immediately afterdistributed free of charge to the customer specify the type ofbattery.

2. customer afterreceived the new replacement battery, damage to the battery willimmediately send it to the delivery company.

dear customer,thank you for your attention and support. in order to we cancommunicate better and have a good deal, please spend a few minutesto look at the following words before shopping, i wish you a happyshopping!

a: how to placean order

1) take a cellphone and qq to contact with us;

(2) or telephonecontact, put your re detailed description!

2: beforeordering, please contact customer service

we strictlyaccording to every customer's specifications, and qualityre to delivery; please the

目前vrla电池存在着浮充电压不均匀的现象，这是由生产电池的各个环节中所用配件和材料的质量、数量以及含量的误差累积所致，特别是vrla电池采用了贫液式设计，误差将影响到电池内部的硫酸饱和度，这直接影响电池浮充时氧气的再化合，从而使浮充时电池的过电位不同，电池的浮充电压也就不一样。但vrla电池经过一定时间的浮充运行后，浮充电压将趋于均匀。因为硫酸饱和度高的电池氧气复合效率差，使饱和度略微下降，电池的浮电压也就趋于均匀。

　　另电池串联的连接条压降大；极柱与连接条接触不良；新电池在运行3~6个月内均有可能存在不均匀现象。
　　
　　电池浮充运行时，落后电池如何判断？
　　
　　落后电池在放电时端电压低，因此落后电池应在放电状态下测量，如果端电压在连续三次放电循环中测量均是低的，就可判为该组中的落后电池，有落后电池就应对电池组均衡充电。例如，对于在浮充状态的电池，如果浮充电压低于2.16v应予以引起重视。