Dow Paper dispersant (PEO)
- 供应商
- 广州斯博协贸易有限公司
- 认证
- 品牌
- DowChemical
- 有效物质含量
- 10000000(%)
- 联系电话
- 86 020 32916849
- 手机号
- 18926253150
- 联系人
- 杨剑
- 所在地
- 中国 广东 增城市 新塘镇新康花苑B区9幢B33号门面
dow paper dispersant(peo)
一. characters
ingredients: peo
appearance: white to light yellow powder
ph value: 8 ~ 10 (0.5% @ 25 ℃)
volatile matter: "1%
true density: 1.15 ~ 1.26g/cm3
apparent density: 0.4 ~ 0.6 g/cm3
二. characteristics
1) peo non-ionic polymer, is almost free from the impact of waterand other additives. however, except for strong oxidizingagents.
2) peo to join a stable suspension that can help a variety ofsubstances dispersed in white water, so as to achieve ferreted outevenly and thin paper.
3) peo can be used to retain the softness of the pulp, create asoft copy of the paper.
4) use the product with excellent stripping properties of paper,it is easy to disengage from the yankee cylinder.
5) does not tend to dust, it is easy to operate.
三. solubility
a solution viscosity
test e: brookfield viscosity
meterconcentration: 0.1%, 0.3%, 0.5%
speed: 12 rpm
temperature: 25 ℃
rotor: 0.1% 0.2% 1 # 2 # rotor rotor
2 dissolution rate
solution conditions are as follows
concentration: 0.5%
mixing: 60rpm
determination: brandt viscometer (rotor # 2, 12rpm, 1 minute, 25℃)
3. lysis time
viscosity-time curves under the table, peo dissolved in roughly1:30 to 2:00 maximum viscosity occurs, with the stirring time afterthe viscosity stable phase, but because of the role of shearstress, viscosity decreased, but does not affect use, we recommenddissolution time in 2 hours -3 hours.
4. dissolved concentrations
peo polymer products are water-soluble products in use, if thesolution concentration is too high, there will be dissolved toolong, so affecting the normal production, we recommend the generaldissolution of the concentration of 0.05% -0.1%.
四, the dissolving tank
preferably stainless steel, plastic, frp and wood. rust willcause the rapid degradation of peo product, so should be usedcautiously. dissolving tank volume rate of consumption decisionsbased on peo.
stir
peo in the case of rapid mixing will degrade, so dispersedparticles, the high-speed mixing should be avoided. recommendedmulti-mixing, such as mixing 2 to 4 layers (as shown). in the caseof low speed, multi-layer mixing can achieve better dispersion.
feeding
the of pre-dispersed peo to determine the circumstancesof its dissolution, so the added method is essential. peo particlesshould be as much as possible so that uniformly dispersed in theliquid surface, feeding and tilting feed plate screen is very goodway. do not use materials directly to the peo shovel to dumpdirectly into the dissolving tank, this will cause a lot oflumps.
dilution
added directly to the stock solution, difficult to obtain gooddispersion. generally need to be diluted to 50-100ppm liquid plusnetwork before the box. to spread good dispersing agent to obtain agood dispersion.
五. use
ucarfloc the use of grades with use, the production of paper andpapermaking type of speed change, roughly the recommended amount asfollows:
peo type papermaking use (kg / t)
napkins 0.5-0.8
toilet paper 0.8-1
toilet paper 0.2-0.5
六. packing
peo products in the role of strong oxidant, the molecular weightof easily degradable, we use the bucket, filled with nitrogen, sothat to improve product stability. 63.5kg/10kg / box
展开全文