GPQ Mini Multifunction Experimental Dryer

品牌五祥雾化型式气流式型号gpq蒸发能力1（kg h2o/h）

gpq mini multifunction experimental dryercentralizes such various processes as spraying drying, fluidizedbed drying, fluidized bed spray granulation, evaporation andconcentration, and pneumatic drying onto a single machine occupyingless than 0.5 square meters. compared with productive e, ithas a good many merits as follows, low investment and cost, smallbulk, less occupation andthroughput,and flexible operation. it is suitable for the demands of the newproducts development of the college,scientificresearch institution, enterprises, especially theexpensiveproductsdevelopment. it can be widely used in the various drying processesin such the fields as biology, chemical, pharmacy, food, dyestuff,light industry and pesticide, etc.

principles

spray drying process:

air is heated in electric heater through the fan, then goes intothe spray dryer through the top. slurry flows into pneumaticatomizing nozzle from liquid material tank by peristaltic pump,atomized into small droplets by the compressed air come from thenozzle. the small droplets spurt out downward, mixes with hot airof the drying chamber, along with water evaporating instantly.slurry turns into fine powder in a moment by drying. the coarsepowder is collected at the bottom of spray dryer, subse thefine powder is gathered in the cyclone. the exhaust air isdischarged after recovery in the bag filter.

fluidized bed drying process:

air is heated in electric heater through the fan, then goesthrough the gas distributor into the fluidized bed dryer; andmaterial enters the fluidized through the top. materials keepfluidized in virtue of the flotage effect of the hot air. energyand mass exchange in the fluid bed dryer. the exhaust air goes intothe cyclone to recover the entrained dust, then discharges afterthe bag filter.

gp mini experimental dryer’s main body is 700mmlong, 700mm wide, 1600mm high, and consists of two major parts. theleft part is the electric heater which is used for the heating ofthe air; the right part isthe automatic control system,plc,which can automatically control the inlet and outlet airtemperatures, inlet air rate and drying time during the dryingprocess according to the set value. by fixing various sets ofsubassembly onto the body, the processes of spray drying, fluidizedbed drying, spray granulation, and so forth, can be implemented, togain powder products

parameter

item

parameters

configuration:

integrally moving

figuration:

( length×width×height )700mm×700mm×1600mm

heating mode

electric heating

electric heater power

9kw

compressed pneumatic pressure

≤0.7mpa

inlet air temperature

80℃～300℃(adjustable, automatic control )

water evaporation rate

1kg/h

total weight

100kg

control mode

plc

hangzhou wuxiang electromechanical manufacturing co., ltd.

address: 381 university road, jincheng town, lin"an, hangzhou,china

post code: 311300

tel: 0086-571-6106 0618

contact: aikin chai

mobile: 0086-

e-mail:cai571@qq.com

https://www.hzwuxiang.com