冷拉设备价格 冷拉 圣霖国际【客户至上】

冷床是冶金轧钢行业对轧制产品（螺纹钢、园钢、钢管等）有效进行冷却的工作台面。冷床由机械传动系统、水冷却系统、冷床工作台面、固定支架等方面组成。冷床主要有拔齿式冷床、齿条步进式冷床、拨爪式冷床、运载链式冷床、滚盘式冷床等。

thecooling bed is metallurgical industry of rolled products (steel，steel，冷拉设备价格， steel and other garden) effectively cooling the worksurface. the cooling bed by mechanical transmission system， watercooling system， cooling bed table， etc. of fixed bracket. the mainbed tooth pulling type cooling bed， rack step type cooling bed，poking claw type cooling bed， carrier chain cooling bed， rollingdisc cooling bed etc.

工艺过程是：线材出精轧机后先入水冷导管进行急冷，冷却到650～750℃，经成圈器成圈后落入流态床中。流态床用流动的、导热性好的粒料(锆砂，含zro267.2%；sio232.8%)作媒介，冷拉设备生产，用鼓风机搅动这些颗粒呈悬浮运动状态，如同铅浴池中的铅液沸腾一样。

theprocess is as follows: after the wire is finished， the first stepis to enter the water cooling pipe and then to cool it to 650~750degrees. the flow bed is used as a medium for flowing，冷拉设备厂家， goodthermal conductivity particles (zirconium sand，冷拉， containingzro267.2%; sio232.8%). the particles are stirred by the blower tomove in suspension， just as the lead liquid in the lead bath isboiling.

经常检查相应辊面磨损情况，有积瘤的要及时清理；观察进钢情况，保证入口导位位置正确；经常卡量矫直盘圆角与成品圆角；制定合理的矫直力，尽量避免回矫；合理控制冷却过程；保证型钢低于80℃进入矫直机；注意观察各辊轴向、垂直窜动量，做到及时应对。

always check the corresponding roller surface wear， a tumor ofthe product to clean up; on steel， ensure the ce guide the correct; often straightening and finished plate fillet fillet; reasonablestraightening force， try to avoid the back; the reasonable  ofthe cooling process; ensure the steel is lower than 80 deg c intothe straight machine; observe the roll axial and vertical movement，timely response.

冷拉设备价格-冷拉-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）拥有很好的服务与产品，不断地受到新老用户及业内人士的肯定和信任。我们公司是全网商盟认证会员，点击页面的商盟客服图标，可以直接与我们客服人员对话，愿我们今后的合作愉快！