浙江先康机械有限公司专业生产【防盗门流水线设备】、【多功能多工位组合冲床】、【多工位组合焊机】、【防盗门数控开槽机】、【防盗门门框成型机】,【防盗门门扇成型机】、【热压胶合机】、【开式门框专用液压机】、【门框数控开平机】、【门扇数控开平机】。
先康为您介绍:数控钣金v型刨槽机
是广泛用于机床外壳,刨槽机装饰类不锈钢产品上的一种工艺。数控v型刨槽机是用于钣金件制造的专业设备,刨槽机为了知足不同板厚在折弯加工时,刨槽机折制所有边的天然弯曲r角小于板厚,就通过本设备在工件折弯位置,刨出一条v型槽,改变了所折弯位置的板材厚度。已被越来越多的用户赏识和接受。
组合焊机combination of welding machine
设备介绍production process:
多工位组合焊机是我们继组合冲床之后推出的新产品,能焊接防盗门锁边、铰链边及门锁固定加强防护板焊接,该产品占地面积少,一次性可完成多工位焊接,无需焊丝、焊气、焊后不需打磨。功效高、质量好,既省人、省力,又能提高质量与功效,是防盗门厂家的必备产品。
multiple station combined machine is our new products after thelaunch of the following combination punch, welding anti-theft door,door lock and hinge seam edge fixed protection plate welding, theproduct covers an area of small, one-time complete multioperatorwelding without welding wire, welding, gas welding, withoutgrinding. the utility model has the advantages of high efficiencyand good , saves people, saves labour, improves andefficacy, and is an essential product of anti-theft doormanufacturers.
生产流程production process:
上料→定位→点焊→下料
feeding→location→welding →out
参数technical parameter:
外形尺寸overall dimension:(mm)
气缸压力cylinder pressure:1800/3500n
工作横梁尺寸work beam size:1710-1820(mm)
气缸行程cylinder stroke:80mm
输入电压the input voltage:380v
焊接节拍welding the beat:3秒/排
额定功率rated power:100kva
【不锈钢刨槽机】的刨刀怎么安装:
刨槽机 在正常工作情况下,油平面应保持在油尺2/3处,切不可低于红线。
机床常常保持干净。分享来自无锡质谨机械。
刨槽时,编程进刀量不得过大,以免损坏刀具及压料不稳。下面小编给大家讲个留意点,在平时的使用过程中务必留意:
操纵完毕,工作台液压夹钳导向槽上的铁屑等杂物必需清除干净。刨槽机减少导轨、滚珠丝杆、刀具磨损均应定期准确进行润滑。
注入的压力油必需过滤,保证油质清洁(按期检查、压力油变质需更换)
展开全文