单效分离机

该机是在日本和台湾分离机的基础上由我司科研人员开发出来的一种新型纤维分离机，在国内第一家生产单效分离机的厂家，专利号：200730017298.8一、概述xrdf-ⅱ型单效分离机主要用于分离废纸浆中的轻重杂物，并对来自水力碎浆机的浆料进行二次碎解。借助于本机的二次碎解，水力碎浆机底部筛板筛孔可增大，提高了其生产能力。本机相当于一台密封卧式水力碎浆机与一台轻重杂质除渣器的组合体，结构紧凑，效率高，本机集碎解、除杂、粗筛等功能于一体，大大简化了废纸处理流程，降低了能耗。浆料切向进入槽体，在叶轮作用下加速，在槽体内产生涡流，涡流产生的向心力使轻杂物聚集在涡流的中心，而重杂物则被甩向槽壁。聚集在槽体中心的轻杂质从安装在前盖上的轻杂质排放口通过阀门连续或间断的排出，甩向槽壁的重杂物与部分浆料一起连续通过重杂物排放管进入重杂物除渣器，经除渣器除去重杂物后的浆料重新送回到进浆管。被除去的重杂物收集在除渣器杂物槽中，通过阀门定时排放。浆料经槽中叶轮二次碎解后，通过叶轮后部筛板由出浆管送出。单效分离机的特点： 1、动力低，产量高。动力55kw的xrdf-ⅱ-2型的产量相当于原动力75kw的xrdf3型。2、进浆浓度高。入口标准浓度在3-4%之间，但浓度可提高至5%。 3、排渣率高。排渣率3-7%之间，根据废液的种类而定。

it is in japan and taiwan separated from the plane on the basisof the division i researchers developed a new type of fiberseparator, the first in the domestic production of single-effectseparator manufacturers, patent number: 200730017298.8 oneoutlining the type xrdf-ⅱ single-efficiency separator forseparation of waste paper in the light and heavy debris and waterfrom the pulper slurry broken for the second solution. with thismachine broken the second solution, hydraulic pulper at the bottomof the sieve plate can be increased to raise its productioncapacity. the local e of a sealed horizontal hydraulicpulper with a level of impurities cleaner combinations, compact,efficient, local-breaking solutions, impurity, coarse sieve, andother functions, greatly simplifies the paper processing, reducingenergy consumption. size to cut into the slot, in the impellerunder acceleration in the slot in the body have a swirl, have aswirl of light so that the centripetal force of the debris gatheredin the center of the vortex, and the debris was re-shuaixiang tankwall. gathered in the tank impurity light from the center of theinstallation of the first stamp of light impurities valve throughthe outfall consecutive or continuous discharge, shuaixiang groovewalls and heavy debris in a row along with some of the slurrythrough the debris re-entering the discharge tube re - cleanerdebris, the cleaner to remove heavy debris after the re-sent backto the slurry into the slurry pipe. was the removal of heavy debristo collect in the tank debris cleaner, from time to time throughthe discharge valve. after the second slurry tank impeller brokensolution, the impeller through the back of the plate by a slurrypipe out. single-efficiency separator characteristics: 1,low-power, high-yield. 55kw of power xrdf-ⅱ -2 type of output ise to the driving force behind the 75kw-xrdf3. 2, into thehigh concentrations of plasma. entrance standards in theconcentration of 3-4%, but the concentration can be increased to5%. 3, the high rate of slag. slag rate of 3-7%, according to thetype of waste.