LSCI070001XGA-RV1.0 7.0英寸 IPS TFT液晶屏模块 规格参数
⚙️ 基本信息
| 面板型号 | LSCI070001XGA-RV1.0 |
| 屏幕尺寸 | 7.0 英寸 |
| 分辨率 | 1024(RGB) × 600 |
| 显示颜色 | 16.7M 色 |
| 显示类型 | a-Si TFT, 透射式 (Transmissive) |
| 视角方向 (Grayscale Inversion) | IPS |
| 模块类型 | COG+FPC+B/L+CTP (带电容触摸) |
| 接口 | LVDS (24 bit RGB) |
机械尺寸
| 模块尺寸 (H×V×D) | 164.9 × 100 × 4.85 mm |
| 有效区域 (AA, H×V) | 154.08 × 85.92 mm |
| 像素数 | 1024(RGB) × 600 像素 |
光学特性
| 典型亮度 (IF=120mA) | 450 cd/m² |
| 响应时间 (Tr+Tf) | Typ. 25 ms |
| 对比度 (CR) | Typ. 200 |
| 面板透光率 (T%) | Typ. 4.2% |
| 可视角度 (CR>10) | 左/右: 70°, 上: 40°, 下: 60° |
| 白光色坐标 (CIE1931) | Wx: 0.313, Wy: 0.329 (Typ.) |
| 背光类型 | 18颗LED (3 chips serial × 6) |
| 背光驱动条件 | IF=120mA, Vf=9.6V (TYP) |
电气特性
| 数字供电电压 (VDD) | 3.0V ~ 3.6V (典型 3.3V) |
| 模拟供电电压 (AVDD) | 8.5V ~ 8.9V (典型 8.7V) |
| TFT Gate on电压 (VGH) | 22V ~ 24V (典型 23V) |
| TFT Gate off电压 (VGL) | -7.4V ~ -6.2V (典型 -6.8V) |
| 公共电压 (VCOM) | 2.2V ~ 2.6V (典型 2.4V) |
| 逻辑输入电平 (H) | VIH: ≥ 0.7*DVDD |
| 逻辑输入电平 (L) | VIL: ≤ 0.3*DVDD |
适用细分应用场景（7.0英寸带触摸IPS屏）
| 工业控制 | 工控人机界面 (HMI)、工业自动化面板、PLC控制终端、数控机床显示 |
| 智能家居 | 智能家居中控屏、智能面板、智能网关显示屏、智能音箱显示 |
| 医疗设备 | 便携式监护仪、医疗手持终端、康复设备显示屏、医疗影像显示 |
| 手持终端 | 智能POS收银机、手持条码扫描器、数据采集终端、物流手持终端 |
| 车载显示 | 车载导航仪表、车载后视显示器、汽车中控屏、倒车影像显示 |
| 安防通信 | 可视门铃、安防门禁对讲系统、视频监控终端、楼宇对讲 |
| 仪器仪表 | 示波器、频谱分析仪、实验仪器面板、电力监测仪表 |
| ️ 嵌入式平板 | 嵌入式平板电脑、信息查询终端、自助服务终端、广告机 |
| ️ 开发评估 | 嵌入式开发板、树莓派扩展屏、FPGA评估板显示、LVDS信号演示 |
⚠️ 注意：以上参数均来源于精准匹配的官方规格书 (LSCI070001XGA-RV1.0（SPEC）.pdf, Revision: 1.0, 发布时间: 2024-03-04)。该型号为7.0英寸IPS全视角显示模块，采用LVDS 24-bit RGB接口，典型亮度450 cd/m²，集成电容触摸屏(CTP)，可广泛应用于工业控制、智能家居、便携医疗、车载导航、手持终端、安防门禁、仪器仪表及嵌入式平板等多种场景。该模块与LSC070I10-R-V1型号尺寸和分辨率相同，但LSCI070001XGA-RV1.0为带CTP的完整模组版本。实际使用请以样品或合同为准。部分光学参数为典型值，实际值可能存在±5%的偏差。外壳设计建议：可视区域比VA单边小0.3mm以上，泡棉开窗比VA单边大0.6mm以上，TP边缘不能接触金属导体。该模块符合RoHS环保要求。
LSCI070001XGA-RV1.0 7.0 Inch IPS TFT LCD Module Specification
⚙️ Basic Information
| Model No. | LSCI070001XGA-RV1.0 |
| Screen Size | 7.0 Inch |
| Resolution | 1024(RGB) × 600 |
| Disy Colors | 16.7M |
| Disy Mode | a-Si TFT, Transmissive |
| Viewing Direction (Grayscale Inversion) | IPS |
| Module Type | COG+FPC+B/L+CTP (with Capacitive Touch) |
| Interface | LVDS (24 bit RGB) |
Mechanical Specification
| Module Size (H×V×D) | 164.9 × 100 × 4.85 mm |
| Active Area (AA, H×V) | 154.08 × 85.92 mm |
| Number of Dots | 1024(RGB) × 600 pixels |
Optical Characteristics
| Typical Luminance (IF=120mA) | 450 cd/m² |
| Response Time (Tr+Tf) | Typ. 25 ms |
| Contrast Ratio (CR) | Typ. 200 |
| Panel Transmittance (T%) | Typ. 4.2% |
| Viewing Angle (CR>10) | Left/Right: 70°, Top: 40°, Bottom: 60° |
| White Chromaticity (CIE1931) | Wx: 0.313, Wy: 0.329 (Typ.) |
| Backlight Type | 18 LEDs (3 chips serial × 6) |
| Backlight Driving Condition | IF=120mA, Vf=9.6V (TYP) |
Electrical Characteristics
| Digital Supply Voltage (VDD) | 3.0V ~ 3.6V (Typ. 3.3V) |
| Analog Supply Voltage (AVDD) | 8.5V ~ 8.9V (Typ. 8.7V) |
| TFT Gate On Voltage (VGH) | 22V ~ 24V (Typ. 23V) |
| TFT Gate Off Voltage (VGL) | -7.4V ~ -6.2V (Typ. -6.8V) |
| Common Voltage (VCOM) | 2.2V ~ 2.6V (Typ. 2.4V) |
| Logic Input Level (H) | VIH: ≥ 0.7*DVDD |
| Logic Input Level (L) | VIL: ≤ 0.3*DVDD |
Target Application Scenarios (7.0 Inch IPS with Touch)
| Industrial Control | Industrial HMI, Automation Panel, PLC Control Terminal, CNC Disy |
| Smart Home | Smart Home Control Panel, Smart Gateway Disy, Smart Speaker Disy |
| Medical Device | Portable Patient Monitor, Medical Handheld Terminal, Rehabilitation Disy |
| Handheld Terminal | Smart POS, Handheld Barcode Scanner, Data Collector, Logistics Terminal |
| Automotive Disy | Car Navigation, Rearview Disy, Center Console, Backup Camera Disy |
| Security & Communication | Video Doorbell, Security Intercom, Video Surveillance Terminal, Building Intercom |
| Instrumentation | Oscilloscope, Spectrum Analyzer, Laboratory Instrument Panel, Power Meter |
| ️ Embedded Tablet | Embedded Tablet PC, Information Kiosk, Self-service Terminal, Digital Signage |
| ️ Development & Evaluation | Embedded Development Board, Raspberry Pi Expansion Screen, FPGA Evaluation Disy |
⚠️ Note: All parameters above are based on the official Product Specification (LSCI070001XGA-RV1.0（SPEC）.pdf, Revision: 1.0, Released: 2024-03-04). This model is a 7.0-inch IPS full viewing angle disy module with LVDS 24-bit RGB interface, 450 cd/m² typical brightness, and integrated capacitive touch panel (CTP). It is widely applicable for industrial HMI, smart home control, portable medical devices, car navigation, handheld terminals, security intercoms, instrumentation, and embedded tablets. This model differs from LSC070I10-R-V1 in that it includes a CTP touch module. Actual performance may vary; please refer to samples or final contract for production. Some optical parameters are typical values and may have a ±5% tolerance. Housing design suggestion: Visual area should be 0.3mm smaller than VA on each side; foam opening should be 0.6mm larger than VA on each side; TP edge must not contact metal conductors. This module is RoHS compliant.
液晶屏,LCM,显示模组,液晶面板,LCD,TFT
许可项目：保税仓库经营（依法须经批准的项目，经相关部门批准后在许可有效期内方可开展经营活动，具体经营项目和许可期限以相关部门批准文件或许可证件为准）一般项目：电子元器件制造，其他电子器件制造，显示器件制造，集成电路制造，光学仪器制造，半导体分立器件制造，电子专用材料制造，电子元器件批发，电子元器件零售，光学仪器销售，半导体分立器件销售，国内贸易代理，集成电路
我司是一家专业从事触摸显示屏模组开发设计、生产及销售的的高新技术企业公司拥有较强的触摸屏及液晶显示模组设计、生产及品质控制团队；拥有国内先进生产设备，为客户提供了强大的软硬件支持。 公司专业设计生产各种标准或非标准液晶显示屏，TFT以及电容触摸屏和电阻触摸屏等产品。 我们的产品以稳定的品质广泛应用于社会各个领域：通用仪器仪表、工业控制器、通讯设备、医疗仪器、金融机具、GPS导航、POS机终端和办公自...