PC/ABS 广州LG HR5007A-NP 东莞供应商 塑胶原料COA 高流动 耐高温

PC/ABS 广州LG HR5007A-NP 东莞供应商 塑胶原料COA 高流动耐高温 原厂原包，随货提供ROHS报告，UL认证，FDA认证，出厂材质证明（COA）及物质安全资料表(SDS).

PC/ABS 广州LGHR5007A-NP物性表

性能特点：防火阻燃等级HB;耐高温; 流动性高; 冲击性能好;   High impactresistance,High li,High HeatResistance,HB

技术参数 Technical Data物理性能 
PHYSICAL额定值  
Nominal Value单位  
Units测试方法  
Test Method密度   
Density1.14g/cm³ASTM D792密度   
Density1.13g/cm³ISO 1183-2熔体质量流动速率   
Melt Flow Rate
250℃，2.16kg   
250℃，2.16kg5.3g/10minASTM D1238熔体体积流动速率   
Melt Volume Rate
260℃，5 kg   
260℃，5 kg18.0cm³/10minISO 1133收缩率   
Shrinkage
MD：3.2 mm，注塑成型   
MD: 3.2 mm, injection molded0.50 to 0.80%ASTM D955吸水率   
Water Absorption
饱和   
saturated0.15%ISO 62-2冲击性能 
IMPACT额定值  
Nominal Value单位  
Units测试方法  
Test Method简支梁缺口冲击强度   
Charpy Notched Impact Strength
23℃   
23℃No Break
ISO 179/1eA 2-30℃   
-30℃36.3kJ/m²ISO 179/1eA 2简支梁冲击强度   
Charpy impact strength
23℃   
23℃No Break
ISO 179/1eU 2-30℃   
-30℃No Break
ISO 179/1eU 2悬臂梁缺口冲击强度   
Izod Notched Impact strength
ASTM D256-30℃，3.2mm，注塑成型   
-30 ℃, 3.2mm, injection molding490J/mASTM D25623℃，3.2mm，注塑成型   
23 ℃, 3.2mm, injection molding640J/mASTM D256悬臂梁缺口冲击强度   
Izod Notched Impact strengthNo Break
ASTM D256热性能 
THERMAL额定值  
Nominal Value单位  
Units测试方法  
Test Method热变形温度   
HDT
1.8 MPa，未退火，6.4 mm，注塑成型   
1.8 MPa, unannealed, 6.4 mm, injection molded113℃ASTM D6481.8 MPa   
1.8 MPa104℃ISO 75-2 2玻璃化转变温度   
Glass transition temperature 9150℃ISO 11357-2 2维卡软化温度   
Vicat Softening Temperature
B50   
B50119℃ISO 306 2线性热膨胀系数   
Coeff.of linear therm expansion
TD   
TD8.3E-51/℃ISO 11359-2 2MD   
MD7.7E-51/℃ISO 11359-2 2相对温度指数   
Relative temperature index
电气性能   
ELECTRICAL
UL 746强度机械性能   
Strength mechanical performance
UL 7461.6 mm   
1.6 mm60.0℃UL 746冲击机械性能   
Impact mechanical performance
UL 7463.0 mm   
3.0 mm60.0℃UL 746电气性能 
ELECTRICAL额定值  
Nominal Value单位  
Units测试方法  
Test Method表面电阻率   
Surface resistivity3.8E+14ohmsIEC 60093 2体积电阻率   
Volume resistivity> 1.0E+15ohms·cmIEC 60093 2介电强度   
Dielectric strength42kV/mmIEC 60243-1 2相对电容率   
Relative permittivity
1 MHz   
1 MHz2.80
IEC 60250 2耗散因数   
Dissipation factor
1 MHz   
1 MHz0.010
IEC 60250 2耐电弧性   
Arc resistancePLC 6
ASTM D495相比漏电起痕指数   
Comparative Tracking IndexPLC 0
UL 746相比漏电起痕指数   
Comparative Tracking Index
CTI   
CTI200
IEC 60112 2高电弧燃烧指数（HAI）   
High Arc Burning Index (HAI)
UL 7461.6 mm   
1.6 mmPLC 1
UL 7463.0 mm   
3.0 mmPLC 1
UL 746高压电弧抗点燃指数（HVAR）（PLC）   
High voltage arc ignition resistance index (HVAR)(PLC)PLC 6
UL 746热丝引燃   
Hot wire ignition
HWI   
HWI
UL 7461.6 mm   
1.6 mmPLC 3
UL 7463.0 mm   
3.0 mmPLC 3
UL 746阻燃性能 
FLAME CHARACTERISTICS额定值  
Nominal Value单位  
Units测试方法  
Test Method阻燃等级   
Flame Class Rating
UL 941.60 mm   
1.60 mmHB
UL 943.00 mm   
3.00 mmHB
UL 94机械性能 
MECHANICAL额定值  
Nominal Value单位  
Units测试方法  
Test Method拉伸模量   
Tensile modulus2200MPaISO 527-2 2拉伸强度   
tensile strength
屈服，3.20 mm，注塑成型   
Yield, 3.20 mm, injection molding 256.9MPaASTM D638屈服   
yield60.0MPaISO 527-2 2拉伸应变   
Tensile strain
断裂，3.20 mm，注塑成型   
Fracture, 3.20 mm, injectionmolded 3> 100%ASTM D638屈服   
yield4.9%ISO 527-2 2Nominal strain at break   
Nominal strain at break> 50%ISO 527-2 2弯曲模量   
Flexural Modulus 4
3.20 mm，注塑成型   
3.20 mm, injection molded 42110MPaASTM D790弯曲强度   
Flexural Strength 4
3.20 mm   
3.20 mm 477.5MPaASTM D790洛氏硬度   
Rockwell hardness
R 级   
R-level114
ASTM D785