MultiPlus-II GX 48/3000/35-32 48/3000/35-32 230V GX AU逆变器

MultiPlus-II GX 48/3000/35-32 48/3000/35-32 230V GX AU逆变器

The MultiPlus-II and ESS ( Energy Storage System) functionalityThe MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an externalcurrent sensor option which extends the PowerControl and PowerAssist function to 50A resp . 100A.The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off -grid applications.It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Severalsystem configurations are possible. F or more detailed information see the ESS Design and configuration manual.The MultiPlus-II GXThe MultiPlus-II GX model integrates a MultiPlus-II inverter/charger and a GX device with a 2x16 -character display and theVE.Can, VE.Direct, USB and Ethernet ports.PowerControl and PowerAssist - Boosting the capacity of a generatorA maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever isextra for battery charging, thus preventing the generator from being overloaded (PowerControl function).PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for alimited period, the MultiPlus-II will compensate for insufficient generator power with power from the battery. When the loadreduces, the spare power is used to recharge the battery.Solar energy: AC power is available even during a grid failureThe MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatiblewith both solar charge controllers and grid -tie inverters.Two AC OutputsThe main AC output features no-break functionality. Upon grid disconnection the MultiPlus-II takes over the load supply inunder 20ms, ensuring uninterrupted operation of computers and electronics.The second AC o utput is active only when grid power is available on the AC input. Use this to connect non-critical loads thatshould not deplete battery, e.g., water heater or air conditioner.Virtually unlimited power thank s to parallel and three-phase operationUp to six units can operate in parallel to achieve higher power output. Six 48/5000/7 0 units, for example, will provide25kW / 30kVA output power with 4 20A charging capacity.In addition to parallel connection, three units of the same model can be configured for three-phase output. But that’s not all:up to six sets of three units can be parallel connected for a 75kW / 90kVA inverter and more than 1200A charging capacity.For parallel and three-phase setups, you can create a multi -unit system with one GX unit and other non -GX units.Configuring, monitoring and controlSettings can be changed in a matter of minutes with the VictronConnect app or VEConfigure software (computer or laptopand MK3-USB interface needed) or via the VRM portal.Use the MultiPlus-II GX or add a Cerbo GX or Ekrano GX to a MultiPlus-II for local or remote connectivity .Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.When connected to the int ernet, systems can be accessed remotely, and settings can be changed.Other monitoring and control options are available as well, like the VictronConnect app together with a VE.Bus Smart dongle ,a Battery Monitor or the Digital Multi Control Panel .