铝塑板及铝塑蜂窝板

铝塑板及铝塑蜂窝板测试标准概述

铝塑复合板和铝蜂窝复合板是广泛应用于建筑幕墙、室内装饰和工业领域的复合材料，需要通过各种性能测试确保其质量和安全性。

铝塑板及铝塑蜂窝板

ISO 11664 Colorimetry - Part 2: CIE standardilluminants比色法.第2部分:CIE 标准光源

ISO 1518-1 Paints and varnishes - Determination of scratchresistance - Part 1: Constant-loadingmethod色漆和清漆.耐擦伤性的测定.第1部分:恒定载荷法

ISO 1518-2 Paints and varnishes - Determination of scratchresistance - Part 2: Variable-loadingmethod油漆和清漆.耐擦伤性的测定.第2部分:电动载荷法

ISO 15184 Paints and varnishes - Determination of film hardness bypencil test涂料和清漆. 铅笔试验测定膜硬度

ISO 1520 Paints and varnishes - Cupping test色漆和清漆 杯突试验

ISO 16474-2 Paints and varnishes - Methods of exposure tolaboratory light sources - Part 2: Xenon-arclamps涂料和清漆.暴露于实验室光源的方法. 第2部分: 氙弧灯

ISO 2360 Non-conductive coatings on non-magnetic electricallyconductive basis materials - Measurement of coating thickness -Amplitude-sensitive eddy currentmethod非磁性电导基体金属上的非导体镀层.镀层厚度的测量.波幅灵敏涡流法

ISO 2409 Paints and varnishes - Cross-cut test色漆和清漆. 横切试验

ISO 2810 Paints and varnishes - Natural weathering of coatings -Exposure and assessment色漆与清漆.涂层的自然风化.暴露和评定

ISO 2813 Paints and varnishes - Determination of gloss value at20°, 60° and 85°涂料和清漆. 20°, 60°以及85°时光泽度的测定

ISO 2815 Paints and varnishes - Buchholz indentation test色漆和清漆Buchholz 压痕测试

ISO 3210 Anodizing of aluminium and its alloys - Assessment of of sealed anodic oxidation coatings by measurement of theloss of mass after immersion in phosphoric acid/chromic acidsolution铝和铝合金的阳极氧化.浸入磷酸/铬酸溶液后质量损失测量法评定阳极氧化膜的封孔质量

ISO 3231 Paints and varnishes - Determination of resistance tohumid atmospheres containing sulfurdioxide油漆和清漆对含有二氧化硫的潮湿环境的耐受性的测定

ISO 4623-2 Paints and varnishes - Determination of resistance tofiliform corrosion - Part 2: Aluminiumsubstrates涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底

ISO 4628-2 Paints and varnishes - Evaluation of degradation ofcoatings - Designation of and size of defects, and ofintensity of uniform changes in appearance - Part 2: Assessment ofdegree ofblistering色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第2部分:起泡等级的评定

ISO 6270-2 Paints and varnishes - Determination of resistance tohumidity - Part 2: Condensation (in-cabinet exposure with heatedwater reservoir)油漆和清漆 耐湿性的测定 第 2 部分：冷凝（柜内暴露于热水箱）

ISO 9227 Corrosion tests in artificial atmospheres - Salt spraytests人工大气中的腐蚀试验 盐雾试验

ISO 1519 Paints and varnishes - Bend test (cylindricalmandrel)涂料和清漆.弯曲试验(圆柱轴)

铝塑板及铝塑蜂窝板欧洲标准

DIN 53292 Testing of sandwiches; Tensile test perpendicular to thefaces夹层结构检验.垂直于表面的拉力试验

DIN 53295 Testing of sandwiches; Peel test by means of adrum夹层检验.用转鼓法的剥离试验

DIN 53291 Testing of sandwiches; Compression test perpendicular tothe faces夹层结构的试验 垂直于面层的压力试验

DIN 53293 Testing of sandwiches; Bending test夹层结构检验.弯曲试验

DIN 53294 Testing of sandwiches; Shear test夹层结构检验.剪切试验

EN 12206-1 Paints and varnishes - Coating of aluminium andaluminium alloys for architectural purposes - Part 1: Coatingsprepared from coating powder颜料和清漆.建筑用铝和铝合金涂层.第1部分:涂覆粉末制涂层

XP CEN/TS 16611 Furniture - Assessment of the surface resistance tomicroscratching家具 - 表面抗微划痕性能评估

铝塑板及铝塑蜂窝板美国标准

ASTM D2247-02 Standard Practice for Testing Water Resistance ofCoatings in Relative Humidity在100％相对湿度下测试涂层耐水性的标准实施规程

AATCC 173 CMC: Calculation of Small Color Differences forAcceptability颜色测量委员会(CMC):可接受性小色差的计算

ASTM 3363 Standard Test Method for Film Hardness by PencilTest铅笔试验法测定涂膜硬度的标准试验方法

ASTM B117 Standard Practice for Operating Salt Spray (Fog)Apparatus操作盐雾（雾）装置的标准实施规程

ASTM B137 Standard Test Method for Measurement of Coating Mass PerUnit Area on Anodically Coated Aluminum测量阳极镀铝层每单位重量的标准试验方法

ASTM B244 Standard Test Method for Measurement of Thickness ofAnodic Coatings on Aluminum and of Other Nonconductive Coatings onNonmagnetic Basis Metals with Eddy-CurrentInstruments涡流仪器测量铝阳极镀层及其它非磁性基底金属绝缘镀层的厚度标准试验方法

ASTM B680 Standard Test Method for Seal of Anodic Coatingson Aluminum by Acid Dissolution酸溶解法测定铝阳极涂层密封质量的标准试验方法

ASTM C207-06 Standard Specification for Hydrated Lime for MasonryPurposes砖石工程用熟石灰标准规范

ASTM C271/C271M Standard Test Method for Density of Sandwich CoreMaterials夹层芯部材料密度的标准试验方法

ASTM C272/C272M Standard Test Method for Water Absorption of CoreMaterials for Sandwich Constructions夹层结构用芯材吸水率的标准试验方法

ASTM C273/C273M Standard Test Method for Shear Properties ofSandwich Core Materials夹层芯材的剪切性能标准试验方法

ASTM C297/C297M Standard Test Method for Flatwise Tensile Strengthof Sandwich Constructions夹层结构的平拉强度的标准试验方法

ASTM C364/C364M Standard Test Method for Edgewise CompressiveStrength of Sandwich Constructions夹层结构侧向压缩强度的标准试验方法

ASTM C365/C365M Standard Test Method for Flatwise CompressiveProperties of Sandwich Cores夹心平压性能的标准试验方法

ASTM C393/C393M Standard Test Method for Core Shear Properties ofSandwich Constructions by Beam Flexure用梁弯曲法测定夹层结构核心抗剪性能的标准试验方法

ASTM D1308-20 Standard Test Method for Effect of HouseholdChemicals on Clear and Pigmented CoatingSystems家用化学品对透明和着色涂层系统影响的标准试验方法

ASTM D1781-98 Standard Test Method for Climbing Drum Peel forAdhesives胶粘剂攀缘卷筒剥离的试验方法

ASTM D2244 Standard Practice for Calculation of Color Tolerancesand Color Differences from Instrumentally Measured ColorCoordinates计算仪器测量颜色的颜色容差和色差的标准实施规程

ASTM D2247 Standard Practice for Testing Water Resistance ofCoatings in Relative Humidity测试涂料在相对湿度下耐水性的标准实施规程

ASTM D2248 Standard Practice for Detergent Resistance of OrganicFinishes有机涂层耐洗涤剂性能的标准实施规程

ASTM D2794-93 Standard Test Method for Resistance of OrganicCoatings to the Effects of Rapid Deformation(Impact)有机涂层抗快速形变(冲击)作用的标准测试方法

ASTM D3260-01 Standard Test Method for Acid and Mortar Resistanceof Factory-Applied Clear Coatings on Extruded AluminumProducts适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法

ASTM D3359 Standard Test Methods for Rating Adhesion by TapeTest通过胶带测试评定附着力的测试方法

ASTM D3363 Standard Test Method for Film Hardness by PencilTest铅笔试验法测定薄膜硬度的标准试验方法

ASTM D4145 Standard Test Method for Coating Flexibility ofPrepainted Sheet预涂板涂层柔韧性的标准试验方法

ASTM D4214 Standard Test Methods for Evaluating the Degree ofChalking of Exterior Paint Films评定外部漆膜的灰化程度的标准试验方法

ASTM D4585/D4585M Standard Practice for Testing Water Resistance ofCoatings Using Controlled Condensation使用受控冷凝水测试涂料的耐水性的标准实践

ASTM D522/D522M Standard Test Methods for Mandrel Bend Test ofAttached Organic Coatings附着有机涂层芯轴弯曲试验的标准试验方法

ASTM D523 Standard Test Method for Specular Gloss镜面光泽度的标准试验方法

ASTM D5947 Test Methods for Physical Dimensions of Solid PlasticsSpecimen固体塑料样品物理尺寸测量方法

ASTM D638-14 Standard Test Method for Tensile Properties ofPlastics塑料拉伸属性的标准试验方法

ASTM D648-18 Standard Test Method for Deflection Temperature ofPlastics Under Flexural Load in the EdgewisePosition边缘位置弯曲载荷下塑料挠曲温度的标准试验方法

ASTM D7091-21 Standard Practice for Nondestructive Measurement ofDry Film Thickness of Nonmagnetic Coatings Applied to FerrousMetals and Nonmagnetic, Nonconductive Coatings Applied toNon-Ferrous Metals用于非铁磁性涂层的非磁性涂层的非破坏性测量的标准实践应用于有色金属和非磁性非导电涂料

ASTM D732-17 Standard Test Method for Shear Strength of Plastics byPunch Tool冲压工具塑料剪切强度的标准试验方法

ASTM D790-17 Standard Test Methods for Flexural Properties ofUnreinforced and Reinforced Plastics and Electrical InsulatingMaterials未增强和增强塑料与电气绝缘材料弯曲性能的标准试验方法

ASTM D792-20 Standard Test Methods for Density and Specific Gravity(Relative Density) of Plastics byDisplacement塑料通过位移的密度和比重（相对密度）的标准测试方法

ASTM D903-98 Standard Test Method for Peel or Stripping Strength ofAdhesive Bonds胶粘剂抗剥落或剥离强度的试验方法

ASTM D968 Standard Test Methods for Abrasion Resistance of OrganicCoatings by Falling Abrasive有机涂层耐磨性的标准试验方法

ASTM E8/E8M Standard Test Methods for Tension Testing of MetallicMaterials金属材料拉伸试验的标准试验方法

ASTM G7/G7M Standard Practice for Atmospheric EnvironmentalExposure Testing of Nonmetallic Materials非金属材料的大气环境曝光试验的标准操作规程

ASTM G85 Standard Practice for Modified Salt Spray (Fog)Testing改进的盐雾试验的标准实施规程

铝塑板及铝塑蜂窝板AAMA标准

AAMA 2603-17a Voluntary Specification, Performance Re andTest Procedures for Pigmented Organic Coatings on AluminumExtrusions and Panels铝型材和板材上的着色有机涂层的推荐规范、性能要求和测试方法

AAMA 2604-21 Voluntary Specification, Performance Re andTest Procedures for High Performance Organic Coatings on AluminumExtrusions and Panels 铝型材和板材上的高性能有机涂层的推荐规范、性能要求和测试方法

AAMA 2605-20 Voluntary Specification Performance Re andTest Procedures for Superior Performing Organic Coatings onAluminum Extrusions and Panels铝型材和板材上的超高性能有机涂层的推荐规范、性能要求和测试方法

AAMA 611-14 Voluntary Specification for Anodized ArchitecturalAluminum阳极氧化建筑用铝非官方技术规范

AAMA 612-17a Voluntary Specification, Performance Re, andTest Procedures for Combined Coatings of Anodic Oxide andTransparent Organic Coating on ArchitecturalAluminum建筑用铝阳极氧化与透明有机复合涂层的推荐规范、性能要求和测试方法

AAMA 620-02 Voluntary Specification for High Performance OrganicCoatings on Coil Coated Architectural AluminumSubstrates滚涂结构铝底层的高性能有机涂层的规范

AAMA 611 Voluntary Specification for Anodized ArchitecturalAluminum阳极氧化建筑铝的自愿规范

AAMA 620 Voluntary Specifications for High Performance OrganicCoatings on Coil Coated Architectural AluminumSubstrates卷材建筑铝基板上高性能有机涂层的自愿规范

铝塑板及铝塑蜂窝板中国标准

GB/T17748-2016 建筑幕墙用铝塑复合板Aluminium-plastic composite panel forcurtain wall

GB/T22412-2016 Aluminium-plastic composite panel forordinary decoration普通装饰用铝塑复合板

GB/T23932-2009 建筑用金属面绝热夹芯板Double skin metal faced insulatingpanels for building

GJB130胶接铝蜂窝夹层结构和芯子

JG/T328-2011 建筑装饰用石材蜂窝复合板 Stone face honeycomb compositepanel for building decoration

JG/T334-2012 建筑外墙用铝蜂窝复合板 Aluminium honeycomb compositepanel for facade wall

GB/T 11999 Plastics-Film and sheeting--Determination of tearresistance--Elmendorf method塑料薄膜和薄片耐撕裂性试验方法 埃莱门多夫法

GB/T 9780 Test method for dirt pickup resistance and stain removalof film of architectural coatings and paint建筑涂料涂层耐沾污性试验方法

GB 1452 Test method for flatwise tension strength of sandwichconstructions夹层结构平拉强度试验方法

GB 1453 Test method for flatwise compression properties of sandwichconstructions or cores夹层结构或芯子平压性能试验方法

GB 1455 Test method for shear properties of sandwich constructionsor cores夹层结构或芯子剪切性能试验方法

GB 1456 Test method for flexural properties of sandwichconstructions夹层结构弯曲性能试验方法

GB 1457 Test method for climbing drum peel strength of sandwichconstructions夹层结构滚筒剥离强度试验方法

GB 8624 Classification for burning behavior of building materialsand products建筑材料及制品燃烧性能分级

GB/T 10125 Corrosion tests in artificial atmospheres---Salt spraytests人造气氛腐蚀试验 盐雾试验

GB/T 10801.1 Moulded polystyrene foam for thermalinsulation（EPS）绝热用模塑聚苯乙烯泡沫塑料(EPS)

GB/T 10801.2 Rigid extruded polystyrene foam board for thermalinsulation(XPS)绝热用挤塑聚苯乙烯泡沫塑料(XPS)

GB/T 11835 Rock wool, slag wool and it's products for thermalinsulation绝热用岩棉、矿渣棉及其制品

GB/T 12754 Prepainted steel sheet彩色涂层钢板及钢带

GB/T 12755 Profiled steel sheet for building建筑用压型钢板

GB/T 13022 Plastics-Determination of tensile properties offilms塑料薄膜拉伸性能试验方法

GB/T 13350 Glass wool and their products for thermalinsulation绝热用玻璃棉及其制品

GB/T 13475 Thermal insulation. Determination of steady-statethermal transmission. Properties. Calibrated and guard hotbox绝热.稳态传热性质的测定.标定和防护热箱法

GB/T 13891 Test methods of specular gloss for decorative buildingmaterials建筑饰面材料镜向光泽度测定方法

GB/T 14207 Test method for water absorption of sandwichconstructions or cores夹层结构或芯子吸收性试验方法

GB/T 14402 Reaction to fire tests for building materials andproducts. Determination of the heat ofcombustion建筑材料及制品的燃烧性能燃烧热值的测定

GB/T 1452 Test method for flatwise tension strength of sandwichconstructions夹层结构平拉强度试验方法

GB/T 1453 Test method for flatwise compression properties ofsandwich constructions or cores夹层结构或芯子平压性能试验方法

GB/T 1454 Test method for edgewise compressive properties ofsandwich constructions夹层结构侧压性能试验方法

GB/T 1455 Test method for shear properties of sandwichconstructions or cores夹层结构或芯子剪切性能试验方法

GB/T 1456 Test method for flexural properties of sandwichconstructions夹层结构弯曲性能试验方法

GB/T 1457 Test method for climbing drum peel strength of sandwichconstructions夹层结构滚筒剥离强度试验方法

GB/T 1464 Test method for density of sandwich construction orcores夹层结构或芯子密度试验方法

GB/T 16259 Test method for in accelerated weathering buildingmaterials建筑材料人工气候加速老化试验方法

GB/T 1634.2 Plastics---Determination of temperature of deflectionunder load---Part 2:Plastics and ebonite塑料负荷变形温度的测定第2部分：塑料和硬橡胶

GB/T 1732 Determination of impact resistance of coatingfilms漆膜耐冲击测定法

GB/T 1740 Determination of resistance to heat and humidity of paintfilms漆膜耐湿热测定法

GB/T 1771 Paints and varnishes. Determination of resistance toneutral salt spray(fog)色漆和清漆耐中性盐雾性能的测定

GB/T 17748 Aluminium-plastic composite panel for curtainwall建筑幕墙用铝塑复合板

GB/T 21086 Curtain wall for building建筑幕墙

GB/T 21558 Rigid polyurethane cellular plastics used in the thermalinsulation of building建筑绝热用硬质聚氨酯泡沫塑料

GB/T 23443 Aluminium panels for building decoration建筑装饰用铝单板

GB/T 2790 Adhesives, 180°peel strength test method for aflexible-bonded-to-rigid test specimen assembly胶粘剂180°剥离强度试验方法挠性材料对刚性材料

GB/T 4957 Non-conductive coatings on non-magnetic basismetals--Measurement of coating thickness-Eddy current非磁性基体金属上非导电覆盖层覆盖层厚度测量 涡流法

GB/T 6379 Precision of test methods--Determination of repeatabilityand reproducibility for a standard test method by interlaboratorytests测试方法的精密度 通过实验室间试验确定标准测试方法的重复性和再现性

GB/T 6461 Methods for corrosion testing of metallic and otherinorganic coatings on metallic substrates--Rating of test specimensand manufactured articles subjected to corrosiontests金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级

GB/T 6672 Plastics film and sheeting Determination of thickness bymechanical scanning塑料薄膜和薄片厚度测定 机械测量法

GB/T 6673 Plastics film and sheeting determination of length andwidth塑料薄膜和薄片长度和宽度的测定

GB/T 6739 Paints and varnishes-Determination of film hardness bypencil test色漆和清漆.铅笔法测定漆膜硬度

GB/T 8753.2 Anodizing of aluminium and aluminium alloys-Assessmentof of sealed anodic oxide coatings Part 2:Phosphoricacid/chromic acid test with nitric acid predip铝及铝合金阳极氧化氧化膜封孔质量的评定方法第2部分;硝酸预浸的磷铬酸法

GB/T 9286 Paints and varnishes---Cross-cut test色漆和清漆 划格试验

GB/T 9754 Paints and varnishes. Determination of specular gloss ofnon-metallic paint films at 20°,60°and85°色漆和清漆不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定

GB/T 9780 Test method for dirt pickup resistance and stain remvoalof film of architectural coatings and paint建筑涂料涂层耐沾污性试验方法

GB/T 9978.1 Fire-resistance tests. Elements of buildingconstruction.Part1:General re建筑构件耐火试验方法.第1部分:通用要求

JC/T 973 Natural stone protector for buildingdecoration建筑装饰用天然石材防护剂

JG/T 328 Stone face honeycomb composite panel for buildingdecoration建筑装饰用石材蜂窝复合板

GJB 130.1胶接铝蜂窝夹层结构和铝蜂窝芯子性能试验方法

GJB 130.1 General principles for performance test methods forbonded aluminum honeycomb sandwich structures and aluminumhoneycomb cores胶接铝蜂窝夹层结构和铝蜂窝芯子性能试验方法 总则

GJB 130.2 Determination method of density of aluminum honeycombcore铝蜂窝芯子密度测定方法

GJB 130.3 Test method for strength of glued aluminum honeycomb corenodes胶接铝蜂窝芯子节点强度试验方法

GJB 130.4 Plane tensile test method for glued aluminum honeycombsandwich structures胶接铝蜂窝夹层结构平面拉伸试验方法

GJB 130.5 Test method for plane compression properties of gluedaluminum honeycomb sandwich structures andcores胶接铝蜂窝夹层结构和芯子平面压缩性能试验方法

GJB 130.6 Plane shear test method for glued aluminum honeycombsandwich structures and cores胶接铝蜂窝夹层结构和芯子平面剪切试验方法

GJB 130.7 Test method for roller peeling of glued aluminumhoneycomb sandwich structures胶接铝蜂窝夹层结构滚筒剥离试验方法

GJB 130.8 Test method for 90° peeling of glued aluminum honeycombsandwich structures胶接铝蜂窝夹层结构90°剥离试验方法

GJB 130.9 Test method for bending properties of glued aluminumhoneycomb sandwich structures胶接铝蜂窝夹层结构弯曲性能试验方法

GJB 130.10 Test method for lateral pressure performance of gluedaluminum honeycomb sandwich structures胶接铝蜂窝夹层结构侧压性能试验方法

赛德斯威(SATISFY)将提供铝塑板及铝塑蜂窝板测试的一站式服务，包括前期的评估、相关资料准备和提交、测试的全程跟进以及报告解读、数据分析和整改建议。联系我们获取更多信息。