供应美国科慕951HP Plus模压成型PFA氟塑料表面光洁度高，抗化学品渗透能力强适用于板衬里
- 报价
- 请来电询价
- 品牌
- 美国科慕（原杜邦）
- 型号
- 951HP Plus
- 特性
- 表面光洁度高，抗化学品渗透能力强
- 关键词
- 科慕951HP Plus,美国科慕PFA,模压成型PFA,PFA氟塑料,板衬里用PFA
- 更新时间
- 2026-05-31 09:14
供应美国科慕951HP Plus模压成型PFA氟塑料表面光洁度高，抗化学品渗透能力强适用于板衬里，原厂原包，随货提供ROHS报告，UL认证，FDA认证，出厂材质证明（COA）及物质安全资料表(SDS)。
美国科慕PFA 951HP Plus 物性表：
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 2.14 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 2.0 | g/10 min | ASTM D3307 |
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 2.0 | g/10 min | ISO 12086 |
Water Absorption (24 hr) | < 0.030 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength | ASTM D3307 | ||
23°C | 28.3 | MPa | |
200°C | 15.2 | MPa | |
Tensile Stress | ISO 12086 | ||
23°C | 28.3 | MPa | |
200°C | 15.2 | MPa | |
Tensile Elongation | ASTM D3307 | ||
Break, 23°C | 290 | % | |
Break, 200°C | 450 | % | |
Tensile Strain | ISO 12086 | ||
Break, 23°C | 290 | % | |
Break, 200°C | 450 | % | |
Flexural Modulus | ASTM D790 | ||
23°C | 600 | MPa | |
200°C | 55.2 | MPa | |
Flexural Modulus | ISO 178 | ||
23°C | 600 | MPa | |
200°C | 55.2 | MPa | |
| Hardness | Nominal Value | Unit | Test Method |
Durometer Hardness (Shore D) | 55 | ASTM D2240 | |
Shore Hardness (Shore D) | 55 | ISO 868 | |
| Thermal | Nominal Value | Unit | Test Method |
Melting Temperature | 300 to 320 | °C | ASTM D4591 |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
Volume Resistivity | 1.0E+18 | ohms·cm | ISO 1325 |
Dielectric Strength (0.250 mm, Method A (Short-Time)) | 80 | kV/mm | ASTM D149 |
Electric Strength (0.250 mm) | 80 | kV/mm | IEC 60243-1 |
Dielectric Constant (1 MHz) | 2.03 | ASTM D150 | |
Dielectric Constant (1 MHz) | 2.03 | IEC 60250 | |
Dissipation Factor (1 MHz) | < 2.0E-4 | ASTM D150 | |
Dissipation Factor (1 MHz) | < 2.0E-4 | IEC 60250 | |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating 2 | V-0 | UL 94 | |
Oxygen Index | > 95 | % | ASTM D2863 |
Oxygen Index | > 95 | % | ISO 4589-2 |
| Additional Information | Nominal Value | Unit | Test Method |
Critical Shear Rate (372°C) | 12.0 | sec^-1 | |
MIT Folding Endurance 3 (200.0 µm) | 1.8E+6 | Cycles | ASTM D2176 |
塑胶原料; PA66; PC; POM; PC/ABS; PA6; PA46; PBT; ABS; EVA; K胶; LCP; PPS; PTFE; PFA; PVDF; FEP; 光扩散PC; 食品级 塑胶原料; 耐高温PA6T/PA9T等
销售：塑胶原料、塑胶辅料、塑胶制品、包装材料、其他化工产品（不含危险化学品）。(依法须经批准的项目，经相关部门批准后方可开展经营活动)〓
东莞市秀方塑料有限公司主要从事塑胶原料贸易，代理及经销各大品牌厂商生成的正品塑胶粒，品种齐全，长期稳定供货，竭诚为广大客户提供选料服务，用最少的钱买最好的料，省时省力省钱。全国各地皆可发货，一包也发，可开发票。公司主营产品: PC及PC合金,PA6尼龙，PA66聚酰胺，POM聚甲醛，PMMA亚克力，PBT，PET，ASA等工程塑料。ABS，PP聚丙烯，PS聚苯乙烯，LDPE低密度聚乙烯，HDPE高密度聚乙烯，LLDPE线性聚乙烯等通用塑...