西门子软启动3RW3026-1BB14
可以将端口扩展器连接到 SCALANCE XM-400 工业以太网交换机，用于灵活扩展到Zui多 24 个端口
每个端口扩展有 8 个端口有三种不同型号，每种型号具有不同接口
产品型号PE400-8SFP
8 个 SFP 插槽，100 或 1000 Mbps
宽工作温度范围：-40 °C 到 +60 °C
PE408，8 个 10/100https://1000 Mbit/s RJ45 端口，带卡环
宽工作温度范围：-40 °C 到 +70 ℃
PE 408PoE，8 个 10/100/1000 Mbps RJ45 端口，带卡环，具有符合 IEEE802.3 类型 1 和类型2 的 PoE 功能
宽工作温度范围：-40 °C 到 +60 °C
需要用单独电源来提供 PoE 电源（提供有 SCALANCE PS924 PoE 或 SCALANCE PS9230 PoE）
左侧的扩展器接口用于连接到 SCALANCE XM-400 基本设备或端口扩展器
右侧的扩展器接口用于连接另一个端口扩展器
8 个端口用于连接以太网，根据具体型号，设计形式不同
通过 LED 灯来显示端口和设备状态
2 个以太网供电 (Power-over-Ethernet) 端子排，带 54 V DC 输入（于 PE408PoE）
温度范围宽 -40 °C 到 +70 °C，IP20 防护等级
SCALANCE PS924 PoE 和 SCALANCE PS9230 PoE 电源的输出电压为 54 V DC，尤其可用于实现符合IEEE 802.3at 的 PoE（以太网供电）
上海鑫瑟电气设备有限公司
在经营活动中精益求精，具备如下业务优势：
SIEMENS 可编程控制器
1、 SIMATIC S7系列PLC：S7-200、S7-1200、S7-300、S7-400、ET-200
2、 逻辑控制模块LOGO！230RC、230RCO、230RCL、24RC、24RCL等
3、 SITOP直流电源 24V DC1.3A、2.5A、3A、5A、10A、20A、40A可并联.
4、HMI 触摸屏TD200 TD400C K-TPOP177 TP177,MP277 MP377,
SIEMENS交、直流传动装置
1、 交流变频器MICROMASTER系列：MM420、MM430、MM440、G110、G120. MIDASTER系列：MDV
2、全数字直流调速装置6RA23、6RA24、6RA28、6RA70、6SE70系列
SIEMENS 数控 伺服
8:801、802S 、802D、802DSL、810D、840D、611U、S120
系统及伺报电机，力矩电机，直线电机，等备件销售。
上海鑫瑟电气设备有限公司（西门子系统集成商）专业销售西门子S7-200/300/400/1200PLC、
数控系统、变频器、人机界面、触摸屏、伺服、电机、西门子电缆等，
并可提供西门子维修服务，欢迎来电垂询
-----------------------------------------------------------------
上海鑫瑟电气设备有限公司 具备以下产品优势
西门子可编程控制器，西门子触摸屏，西门子工业以太网，
西门子数控系统，西门子高低压变频器，西门子电机驱动等等。
西门子S7-200PLC，西门子S7-400PLC，西门子S7-300PLC，LOGO！逻辑模块，
西门子ET200I/O模块，西门子S7-1200PLC,西门子电机,西门子低压电机,伺服电机,
主轴电机,直线电机，扭矩电机，直流电机，西门子工业以太网，西门子光钎电缆，工业交换机，通讯网卡，
西门子网络通讯设备，网络模块，西门子总线电缆，紫色双芯电缆绿色4芯电缆，蓝色双芯电缆，西门子总线接头，西门子驱动系统，伺服驱动，模块驱动，电源模块，西门子触摸屏，Smart1000Micro面板文本面板多功能面板，Smart700触摸屏OP73触摸屏，其他触摸屏面板，西门子变频器MM420变频器，MM430变频器，MM440变频器，G120变频器G110变频器系列，工程变频器，西门子工程逆变器，西门子直流调速器，其他变频器及备件，西门子数控系统及备件，NCU主板，CCU控制主板，西门子数控系统，西门子PCU50，控制单元操作面板，手持单元，西门子软件，西门子低压产品，西门子工控机等
西门子PLC模块-西门子PLC主机-西门子PLC控制器-西门子PLCS7200-西门子PLCS7-300-西门子plcs7-400-西门子PLCS71200-西门子PLCS71500西门子PLC扩展模块-西门子PLC通讯模块-西门子PLC模块-西门子PLC数字量模块-西门子PLC输出输入模块
SINAMICS S120 Combi is a very compact and rugged drive concepttailored for compact turning and milling machines. SINAMICS S120Combi integrates a line infeed with regenerative feedbackcapability, power units for spindle and feed motors as well as aTTL encoder interface into a single Power Module.
The SINAMICS S120 Combi Power Modules are optimized as a drive for3 to 6 axes in machine tools. The Power Modules are ailable inframe types A01 to A07 and B01 and B02 with external air cooling.SINAMICS Motor Modules in booksize compact format are used asexpansion axes.
The main differences between frame types Axx and Bxx lie in themechanical configuration, the fan design, and the connection of theexpansion axes.
Compact multi-axis module with line infeed with regenerativefeedback capability and power units for 3 or 4 axes
Customized drive system for compact standard turning and millingmachines
Requires very little mounting space in control cabinet incl. fanunit, shield terminals and ventilation clearances
Optimized for weak supply networks with frequent undervoltage,network imbalances and large frequency fluctuations
Optimized for harsh operating conditions with increased cabinettemperature and increased humidity
Rugged Power Modules resistant to short circuits, overvoltage andground faults
Rugged and easy-to-fit screw-type terminals with integrated shieldconnection for the power cables
Perfectly designed for expansion using additional Motor Modules inbooksize compact format
Low energy consumption thanks to state-of-the-art 400-Vtechnology
Excellent dynamic response and machining precision thanks toDynamic Servo Control (DSC)
Simple cabling due to intelligent interface
Very simple commissioning thanks to predefined topologies
Power Module with 3 or 4 integrated power units
A01 to A03: 3 axes
A04 to A07, B01 and B02: 4 axes
Integrated line infeed with regenerative feedback capability
Integrated TTL encoder interface
Integrated motor brake control for one axis
Integrated fan power supply
Line connection voltage 380 to 480 V 3 AC
Supply types TT, TN and IT
Integrated shield connection clamps
Heat dissipation concept with an external heat sink for extremelylow power loss in the control cabinet
Easy-to-mount external fan module for frame types A01 to A07, nomounting effort for frame types B01 and B02 thanks to the fanintegrated in the heat sink
Increased ailability thanks to fan monitoring
Derating only from 45 °C cabinet temperature
Power cables are connected via screw-type terminals
The following components can be connected to the SINAMICS S120Combi drive system:
SINUMERIK 840D sl
SINUMERIK ONE
SINUMERIK 828D
3 or 4 spindles/feed motors
3 or 4 motor encoders
3 or 4 direct encoders via DMC20
Direct spindle encoder directly to TTL or sin/cos via SMC20
External fan module for frame types A01 to A07
(integrated fan for frame types B01 and B02)
Up to 2 additional SINAMICS S120 Motor Modules in booksize compactformat
Frame types Axx: via DC link connection and 24 V DC busbars
Frame types Bxx: via connection kit for expansion axes
Braking Module with braking resistor via DC link connection
Control Supply Module
Frame types Axx: via DC link connection and 24 V DC busbars
Frame types Bxx: via connection kit for expansion axes
1 safe motor brake control
5 or 6 DRIVE‑CLiQ sockets
24 V electronics power supply via connector
1 safe standstill input for the infeed (Enable Pulses)
1 safe standstill input for the spindle and feeds (EnablePulses)
1 temperature sensor input for the spindle
PE connections
The scope of supply of the SINAMICS S120 Combi Power Modulesincludes:
SINAMICS S120 Combi Power Module
Accessories pack consisting of:
3 DRIVE‑CLiQ dust protection blanking plugs
Connector X224 for the electronics power supply
Connector X11 for motor brake control
Connector X21 Enable Pulses infeed
Connector X22 Enable Pulses temperature sensor – axes
5 shield terminals for power cables
Warning labels in 30 languages
The external fan module combined with the reinforcement plates isemployed to provide perfect cooling of the SINAMICS S120 CombiPower Modules, frame types A01 to A07.
To cool the SINAMICS S120 Combi Power Module, a volumetric flow ofair of at least 160 m3/h through the heat sink is required.
The external fan module supplies a maximum volumetric flow of 290m3/h. This dimensioning ensures an adequate air flow rate, evenwith a lower supply voltage or with a slightly soiled heatsink.
Due to the encapsulated electronics and the ball-bearing-mountedclosed rotor, the fan module can be used even under exactingenvironmental conditions. The fans are e with electronicreverse-polarity, blocking and overload protection systems. Toensure maximum machine ailability, the fan speed is monitored. Auser alarm is displayed if the fan stops.
DMC20 集线器模块用于执行 DRIVE‑CLiQ 线路的星形拓扑
通过可选的程序模块，可以简单、方便地复制控制程序
可以将端口扩展器连接到 SCALANCE XM-400 工业以太网交换机，用于灵活扩展到Zui多 24 个端口
每个端口扩展有 8 个端口有三种不同型号，每种型号具有不同接口
产品型号PE400-8SFP
8 个 SFP 插槽，100 或 1000 Mbps
宽工作温度范围：-40 °C 到 +60 °C
PE408，8 个 10/100https://1000 Mbit/s RJ45 端口，带卡环
宽工作温度范围：-40 °C 到 +70 ℃
PE 408PoE，8 个 10/100/1000 Mbps RJ45 端口，带卡环，具有符合 IEEE802.3 类型 1 和类型2 的 PoE 功能
宽工作温度范围：-40 °C 到 +60 °C
需要用单独电源来提供 PoE 电源（提供有 SCALANCE PS924 PoE 或 SCALANCE PS9230 PoE）
左侧的扩展器接口用于连接到 SCALANCE XM-400 基本设备或端口扩展器
右侧的扩展器接口用于连接另一个端口扩展器
8 个端口用于连接以太网，根据具体型号，设计形式不同
通过 LED 灯来显示端口和设备状态
2 个以太网供电 (Power-over-Ethernet) 端子排，带 54 V DC 输入（于 PE408PoE）
温度范围宽 -40 °C 到 +70 °C，IP20 防护等级
SCALANCE PS924 PoE 和 SCALANCE PS9230 PoE 电源的输出电压为 54 V DC，尤其可用于实现符合IEEE 802.3at 的 PoE（以太网供电）
上海鑫瑟电气设备有限公司
在经营活动中精益求精，具备如下业务优势：
SIEMENS 可编程控制器
1、 SIMATIC S7系列PLC：S7-200、S7-1200、S7-300、S7-400、ET-200
2、 逻辑控制模块LOGO！230RC、230RCO、230RCL、24RC、24RCL等
3、 SITOP直流电源 24V DC1.3A、2.5A、3A、5A、10A、20A、40A可并联.
4、HMI 触摸屏TD200 TD400C K-TPOP177 TP177,MP277 MP377,
SIEMENS交、直流传动装置
1、 交流变频器MICROMASTER系列：MM420、MM430、MM440、G110、G120. MIDASTER系列：MDV
2、全数字直流调速装置6RA23、6RA24、6RA28、6RA70、6SE70系列
SIEMENS 数控 伺服
8:801、802S 、802D、802DSL、810D、840D、611U、S120
系统及伺报电机，力矩电机，直线电机，等备件销售。
数控系统、变频器、人机界面、触摸屏、伺服、电机、西门子电缆等，
并可提供西门子维修服务，欢迎来电垂询
-----------------------------------------------------------------
上海鑫瑟电气设备有限公司 具备以下产品优势
西门子可编程控制器，西门子触摸屏，西门子工业以太网，
西门子数控系统，西门子高低压变频器，西门子电机驱动等等。
西门子S7-200PLC，西门子S7-400PLC，西门子S7-300PLC，LOGO！逻辑模块，
西门子ET200I/O模块，西门子S7-1200PLC,西门子电机,西门子低压电机,伺服电机,
主轴电机,直线电机，扭矩电机，直流电机，西门子工业以太网，西门子光钎电缆，工业交换机，通讯网卡，
西门子网络通讯设备，网络模块，西门子总线电缆，紫色双芯电缆绿色4芯电缆，蓝色双芯电缆，西门子总线接头，西门子驱动系统，伺服驱动，模块驱动，电源模块，西门子触摸屏，Smart1000Micro面板文本面板多功能面板，Smart700触摸屏OP73触摸屏，其他触摸屏面板，西门子变频器MM420变频器，MM430变频器，MM440变频器，G120变频器G110变频器系列，工程变频器，西门子工程逆变器，西门子直流调速器，其他变频器及备件，西门子数控系统及备件，NCU主板，CCU控制主板，西门子数控系统，西门子PCU50，控制单元操作面板，手持单元，西门子软件，西门子低压产品，西门子工控机等
西门子PLC模块-西门子PLC主机-西门子PLC控制器-西门子PLCS7200-西门子PLCS7-300-西门子plcs7-400-西门子PLCS71200-西门子PLCS71500西门子PLC扩展模块-西门子PLC通讯模块-西门子PLC模块-西门子PLC数字量模块-西门子PLC输出输入模块
SINAMICS S120 Combi is a very compact and rugged drive concepttailored for compact turning and milling machines. SINAMICS S120Combi integrates a line infeed with regenerative feedbackcapability, power units for spindle and feed motors as well as aTTL encoder interface into a single Power Module.
The SINAMICS S120 Combi Power Modules are optimized as a drive for3 to 6 axes in machine tools. The Power Modules are ailable inframe types A01 to A07 and B01 and B02 with external air cooling.SINAMICS Motor Modules in booksize compact format are used asexpansion axes.
The main differences between frame types Axx and Bxx lie in themechanical configuration, the fan design, and the connection of theexpansion axes.
Compact multi-axis module with line infeed with regenerativefeedback capability and power units for 3 or 4 axes
Customized drive system for compact standard turning and millingmachines
Requires very little mounting space in control cabinet incl. fanunit, shield terminals and ventilation clearances
Optimized for weak supply networks with frequent undervoltage,network imbalances and large frequency fluctuations
Optimized for harsh operating conditions with increased cabinettemperature and increased humidity
Rugged Power Modules resistant to short circuits, overvoltage andground faults
Rugged and easy-to-fit screw-type terminals with integrated shieldconnection for the power cables
Perfectly designed for expansion using additional Motor Modules inbooksize compact format
Low energy consumption thanks to state-of-the-art 400-Vtechnology
Excellent dynamic response and machining precision thanks toDynamic Servo Control (DSC)
Simple cabling due to intelligent interface
Very simple commissioning thanks to predefined topologies
Power Module with 3 or 4 integrated power units
A01 to A03: 3 axes
A04 to A07, B01 and B02: 4 axes
Integrated line infeed with regenerative feedback capability
Integrated TTL encoder interface
Integrated motor brake control for one axis
Integrated fan power supply
Line connection voltage 380 to 480 V 3 AC
Supply types TT, TN and IT
Integrated shield connection clamps
Heat dissipation concept with an external heat sink for extremelylow power loss in the control cabinet
Easy-to-mount external fan module for frame types A01 to A07, nomounting effort for frame types B01 and B02 thanks to the fanintegrated in the heat sink
Increased ailability thanks to fan monitoring
Derating only from 45 °C cabinet temperature
Power cables are connected via screw-type terminals
The following components can be connected to the SINAMICS S120Combi drive system:
SINUMERIK 840D sl
SINUMERIK ONE
SINUMERIK 828D
3 or 4 spindles/feed motors
3 or 4 motor encoders
3 or 4 direct encoders via DMC20
Direct spindle encoder directly to TTL or sin/cos via SMC20
External fan module for frame types A01 to A07
(integrated fan for frame types B01 and B02)
Up to 2 additional SINAMICS S120 Motor Modules in booksize compactformat
Frame types Axx: via DC link connection and 24 V DC busbars
Frame types Bxx: via connection kit for expansion axes
Braking Module with braking resistor via DC link connection
Control Supply Module
Frame types Axx: via DC link connection and 24 V DC busbars
Frame types Bxx: via connection kit for expansion axes
1 safe motor brake control
5 or 6 DRIVE‑CLiQ sockets
24 V electronics power supply via connector
1 safe standstill input for the infeed (Enable Pulses)
1 safe standstill input for the spindle and feeds (EnablePulses)
1 temperature sensor input for the spindle
PE connections
The scope of supply of the SINAMICS S120 Combi Power Modulesincludes:
SINAMICS S120 Combi Power Module
Accessories pack consisting of:
3 DRIVE‑CLiQ dust protection blanking plugs
Connector X224 for the electronics power supply
Connector X11 for motor brake control
Connector X21 Enable Pulses infeed
Connector X22 Enable Pulses temperature sensor – axes
5 shield terminals for power cables
Warning labels in 30 languages
The external fan module combined with the reinforcement plates isemployed to provide perfect cooling of the SINAMICS S120 CombiPower Modules, frame types A01 to A07.
To cool the SINAMICS S120 Combi Power Module, a volumetric flow ofair of at least 160 m3/h through the heat sink is required.
The external fan module supplies a maximum volumetric flow of 290m3/h. This dimensioning ensures an adequate air flow rate, evenwith a lower supply voltage or with a slightly soiled heatsink.
Due to the encapsulated electronics and the ball-bearing-mountedclosed rotor, the fan module can be used even under exactingenvironmental conditions. The fans are e with electronicreverse-polarity, blocking and overload protection systems. Toensure maximum machine ailability, the fan speed is monitored. Auser alarm is displayed if the fan stops.
DMC20 集线器模块用于执行 DRIVE‑CLiQ 线路的星形拓扑
通过可选的程序模块，可以简单、方便地复制控制程序
西门子3RW4447-6B4
关键词
西门子软启动3RW3026-1BB14
更新时间
上海鑫瑟电气设备有限公司已认证
- 钻石会员
- 第8年
- 统一社会信用代码
- 91310117MA1J26G3X0
- 成立日期
- 2018年10月23日
- 法定代表人
- 黄章科
- 注册资本
- 200
主营产品
数控系统、变频器、人机界面、触摸屏、伺服、电机、西门子电缆等，
经营范围
电气设备，工业自动化设备，电子元器件，仪器仪表，电线电缆，通信设备及相关产品，电气设备，五金交电，电子设备，机电设备及配件，机械设备，电子产品销售等等。
公司简介
我公司经营西门子全新原装现货PLC；S7-200S7-300 S7-400 S7-1200 触摸屏，变频器，6FC，6SNS120 V10 V60 V80伺服数控备件：原装进口电机（1LA7、1LG4、1LA9、1LE1），国产电机（1LG0，1LE0）大型电机（1LA8，1LA4，1PQ8）伺服电机（1PH，1PM，1FT，1FK，1FS）西门子保内全新原装产品‘质保一年。一年内因产品质量问题免费更换新产品；不收取任何费。欢迎致电咨询...