立式混合机，卧式混合机

立式搅拌机

vertical mixer

特点：

features :

占地少，容量大，耗电低，省人工，混合均化快捷

it occupies less space, has large capacity, low powerconsumption, labor saving and uniform mixing

自动运转计时，马达过载保护，加料限位报警（选配）

automatic operation time, motor overload protection,feeding limit alarm (optional)

设备与原料所接触部分的材料均为不锈钢制作，清料容易不易生锈

the materials in the parts in contact with the rawmaterials are made of stainless steel, and the materials are easyto rust

日本nsk轴承，采用内置式或分离式安装方式，使原料或粉末与轴承分离，不易卡死，大大延长轴承使用寿命

japan nsk bearings, using built-in or separateinstallation, so that the separation of raw materials or powder andbearings, is not easy to get stuck, greatly extend bearinglife

工作原理：立式搅拌机的工作原理是螺杆的快速旋转将原料从桶体底部由中心提升至顶端，再以伞状飞抛散落，回至底部，这样原料在桶内上下翻滚搅拌，短时间内即可将大量原料均化的混合完毕

working principle : the working principle of the verticalmixer is that the rapid rotation of the screw raises the materialfrom the bottom of the barrel from the center to the top. and thenthrow the material in a manner of umbrella shape to the bottom. thematerials are mixed up and down in the bucket in a shorttime

用途：塑料片料、粉碎料、塑料粒料、塑胶新旧料及添加色母搅拌均化等用途

use : plastic materials, regrind, plastic pellets, plasticmasterbatch mixing old and new materials are added and so onpurpose

适用行业：切粒、塑胶造粒、色母制造、塑料改性、再生料回收加工、大件注塑等行业

applicable industry : cutting, plastic granulation, colormasterbatch manufacturing, plastic modification, recycled materialrecycling processing, large-scale injection molding and otherindustries

立式加热搅拌机

vertical heating mixer series

搅拌干燥同步：由于物料在进行干燥过程中，持续保持流动状态。热量渗透均化。干燥时间短且不易结块。

stirring and drying synchronization : since the materialis kept in a flowing state during the drying process, the heat isuniformly penetrated, the drying time is short, and it is not easyto agglomerate

本系列标准机型为：双层桶体设计（经济型为单层设计）内层与物料接触部分全部为不锈钢材料制造，中央夹层安装特殊保温材料，因而可达到安全、节能的效果

the standard models of this series are : double-drumdesign(economical single-layer design), the inner layer andmaterial contact parts are all made of non-induced steel materials;the middle interlayer is e with special insulationmaterials, which can achieve safety and energy savingeffect

特制高频加热器，加热快，耗电少，每顿料干燥综合成本为25-30元，（含水1%以下，pp造粒料测试，0.9元/度电费计算，使用abt-10r型测试

specialuency heater, fast heating, low powerconsumption, the comprehensive cost of drying each material is25-30 yuan. (aqueous 1% or less, pp granulation test, yuan /kwhelectricity cost calculation, using abt-10r type test)

特设双管排湿口，能有效排出湿气，收集粉尘，绝不污染工作环境

the special double-tube drainage port can effectivelydischarge moisture, collect dust, and never pollute the workingenvironment

桶体设有入口门（选购）换色换料清理简单快捷

the barrel body is provided with an entrance door(optional), and it is quick and easy to change color andrefuel

型号多，容量大，常备一次性能装载：0.5吨、1吨、1.5吨、2吨、3吨等现货供客选用

there are many models and large capacity, and oneperformance load is available: 0.5 tons, 1 ton, 1.5 tons, 2 tons, 3tons, etc

干燥混合功能二合一，当不需要干燥时，只需将“加热开关”及“风机开关”关闭，本系列机型即可用于塑料搅拌均化用途，一机二用。

the dry mixing function is two-in-one, when it is notnecessary to dry, just turn off the “heating swich” and “fanswitch” . this series of models can be used for plastic mixing andhomogenization purposes, one machine and two

大型卧式加热搅拌机

large horizontal(heating) mixer

特点

features

适合量大之塑胶粒、粉、新料、旧料之搅拌混合，混色之用途（单层不加热）

suitable for large of plastic pellets, flour, newmaterial, old material of the mixing, blending purposes(singlenon-heating)

适合pvc，tpr，tpe，pp，pe等塑胶粒粉之搅拌、干燥（双层加热）

suitable for pvc, tpr, tpe,pp, pe and other plastic resinpowder of the mixing, drying(double heating)

双层加热高温度可达300℃

double padded up to the maximum temperature300℃

可选用a3板内壁或sus304内壁

optional a3 wall or sus304 plate wall

采用进口名厂电控温控件（日本或台湾）

imported famous factory electric temperature control (japan or taiwan)

采用进口名厂减速机或齿轮箱减速，安全、平稳、可靠

imported famous factory reducer or reduction gear box,safe, stable and reliable

每分钟8转（可依客户要求订做之）

8 turn per minute (customized according to customer’sre)

可加螺旋送料机，方便人员操作

screw feeder can be added to facilitate theoperator

可依客户实际要求制作特殊及更大机型

produce according to customer special re andmore practical models