芜湖西门子代理商
- 供应商
- 浔之漫智控技术（上海）有限公司-西门子模组
- 认证
- 西门子
- 西门子代理商
- PLC
- 支持售后
- 产地
- 德国
- 联系电话
- 18873121520
- 全国服务热线
- 18873121520
- 邮箱
- 464238979@qq.com
- 经理
- 陈经理
- 所在地
- 上海市松江区石湖荡镇塔汇路755弄29号1幢一层A区213室
- 更新时间
- 2026-04-14 08:30
芜湖西门子代理商
浔之漫智控技术（上海）有限公司是西门子中国的合作伙伴，授权代理商。
公司主要从事工业自动化产品的集成,销售和维修，是全国的自动化设备公司之一。公司坐落于中国一线城市上海市，我们真诚的希望在器件的销售和工程项目承接、系统开发上能和贵司开展多方面合作。以下是我司主要代理西门子产品，来电来函咨询，我们将为您提供优惠的价格及快捷细致的服务！
SIEMENS (PLC)可编程控制器
1、 SIMATIC S7系列PLC：S7-200CN、S7-1200、S7-300、S7-400、ET-200丶S7-200SMART、S7-1500等
2、 逻辑控制模块LOGO！230RC、230RCO、230RCL、24RC、24RCL 等
3、 SITOP 直流电源 24VDC 1.3A、2.5A、3A、5A、10A、20A、40A 可并联.
4、HMI 触摸屏 TD200TD400C K-TP OP177 TP177,MP277 MP377,
5丶西门子软件丶交换机丶电缆等。
6、V20、V90、G120、G120X、G120XA伺服驱动器与电机等
SIEMENS 西门子低压
1丶5SY丶5SL丶5SN系列小型断路器
2丶3VA丶3VM丶3VT8系列塑壳断路器
3丶3WL丶3WT系列框架断路器
4丶西门子软启动丶接触器丶继电器丶LOGO等。
SIEMENS 西门子交、直流传动装置
1、 交流变频器MICROMASTER 系列：MM420、MM430、MM440、G110、G120.
2、全数字直流调速装置6RA23、6RA24、6RA28、6RA70、6SE70 系列
SIEMENS西门子 数控 伺服
SINUMERIK:801、802S、802D、802DSL、810D、840D、611U、S120系统及伺报电机，力矩电机，直线电机，电缆，伺服驱动等备件销售。
Controller for getting started with S7-1200 G2
Expandable by:
1 signal board (SB)
8 signal modules (SM)
The compact CPU 1212C has:
3 device versions with different power supply and controlvoltages.
Integrated power supply either as wide-range AC or DC powersupply (85 ... 264 V AC or 24 V DC)
Integrated 24 V encoder/load current supply:
For direct connection of sensors and encoders. With 300 mAoutput current also for use as load current supply.
8 integrated digital inputs 24 V DC (sinking input/sourcinginput (IEC type 1 sinking input)).
6 integrated digital outputs, either 24 V DC or relay.
10 Motion technology objects
8 pulse outputs (PTO) with a frequency of up to 100 kHz.
Pulse-width modulated outputs (PWM) with a frequency of up to100 kHz.
Integrated PROFINET interface (TCP/IP native, ISO-on-TCP).
8 high-speed counters (3 with max. 100 kHz; 1 with max. 30 kHz),with configurable enable and reset inputs, can be usedsimultaneously as up and down counters with 2 separate inputs orfor connecting incremental encoders.
Expansion by analog or digital signals directly on the CPU viasignal board (with retention of CPU mounting dimensions).
Expansion by a wide range of analog and digital input and outputsignals via signal modules.
Optional memory expansion (SIMATIC Memory Card).
Integrated PID controller with auto-tuning functionality.
Program alarm.
Near Field Communication (NFC) for mobile device access to theCPU.
Integral real-time clock.
Interrupt inputs:
For extremely fast response to rising or falling edges of processsignals.
Removable push-in clamps on all modules.
Comprehensive instruction set:
A wide range of operations facilitates programming:
Basic operations such as binary logic operations, resultallocation, save, count, create times, load, transfer, compare,shift, rotate, create complement, call subprogram (with localvariables)
Integral communication commands (e.g. USS protocol, Modbus RTU,S7 communication "T-Send/T-Receive" or Freeport)
User-friendly functions such as pulse-width modulation,uence function, arithmetic functions, floating-point arithmetic,PID control, jump functions, loop functions and code conversions,Motion technology objects
Mathematical functions, e.g. SIN, COS, TAN, LN, EXP.
Counting:
User-friendly counting functions in conjunction with the integratedcounters and special commands for high-speed counters open up newapplication areas for the user.
Interrupt processing:
Edge-triggered interrupts (activated by rising or falling edgesof process signals on interrupt inputs) support a rapid response toprocess events
Program interrupts
Time-triggered interrupts
Counter interrupts can be triggered when a setpoint is reachedor when the counting direction changes
Communication interrupts allow the rapid and easy exchange ofinformation with peripheral devices such as printers or bar codereaders
Password protection
Test and diagnostics functions:
Easy-to-use functions support testing and diagnostics, e.g.online/offline diagnostics.
"Forcing" of inputs and outputs during testing anddiagnostics:
Inputs and outputs can be set independently of the cycle and thuspermanently, for example, to test the user program.
Motion Control in accordance with PLCopen for simple control ofmovement
Library functionality
The STEP 7 Basic programming package permits complete programmingof all S7-1200 Controllers and the associated I/O.