现货norgren11-042-003调压阀

technical data
fluid: compressed air
inlet pressure range: 10 psig (0.7 bar) to 400 psig (27.6 bar)*
* for best performance, inlet pressure should be at least 10 psig(0.7 bar) greater than the desired
regulated pressure, but must not exceed the specified maximum.
operating temperature: 0° to 175°f (-20° to 80°c) **
** air supply must be dry enough to avoid ice formation attemperatures below 35°f (2°c).
typical flow with a conventional pilot regulator at 100 psig (6.9bar) inlet pressure,
90 psig (6.3 bar) set pressure, and a droop of 5 psig (0.35 bar)from set:
1/2" ports: 120 scfm (57 dm3/s)
1" ports: 300 scfm (142 dm3/s)
port sizes:
main gauge pilot exhaust
1/4" 1/4" 1/4" 3/4"
3/8" 3/8" 1/4" 3/4"
1/2", 3/4", 1", 1-1/4" 1/2" 1/4" 3/4"
thread type
main and gauge ports: ptf, iso g, or iso rc
pilot port: ptf with ptf main ports, iso g with iso g and iso rcmain ports
exhaust port: ptf with ptf main ports, iso g with iso g and iso rcmain
ports
materials
body: zinc
bonnet: aluminum
bottom plug: acetal
valve: brass
elastomers: nitrile