多圈值编码器SICK,ATM60-A4A12X12,1030001，钢铁行业专用

多圈值编码器sick,atm60-a4a12x12,钢铁行业专业编码器

absolute encoders
atm60 ssi
 
model name atm60-a4a12x12
part no. 1030001
 
at a glance

 extremely rugged, tried-and-tested absolute multiturn encoderwith a

resolution of up to 26 bits

 mechanical interface: face mount flange, servo flange,blind hollow

shaft and extensive adapter accessories

 zero-set and preset functions via hardware or software

 no battery required

 electrical interface: ssi with gray or binary codetype

 electronically adjustable, configurable resolution

 rotary axis function (optional) also for non-binaryresolutions (per

revolution) and decimal numbers (number of revolutions)

 magnetic scanning

your benefits

 fewer variants are required since one freely programmableencoder

offers all singleturn and multiturn resolutions

 easy setup due to various connectivity options (cable,m23)

 less maintenance and a long service life reduce overallcosts

 application flexibility due to easily interchangeablecollets for the

blind hollow shaft

 quick commissioning using the zero set/preset functioneither at the

press of the button on the device or via software

 increased productivity due to highly reliable shock andvibration

resistance

 worldwide availability and serviceuick andreliable customer

service
 
 
         
  
 
 
 
 

performance
 max. number of steps per revolution: 4,096 
 max. number of revolutions: 4,096 
 resolution power: 4,096 x 4,096 
 resolution: 12 bit x 12 bit 
 error limits: ± 0.25 ° 
 repeatability (ta not constant): 0.1 ° 
 measuring step: 0.043 ° 
 initialization time: 1,050 ms 1) 
 1) valid positional data can be read once this time haselapsed   

mechanical data
 mechanical interface: solid shaft, face mountflange 
 shaft diameter: 10 mm

 
 mass: 0.5 kg 
 permissible load capacity of shaft: 300 n (radial), 50 n(axial) 
 moment of inertia of the rotor: 35 gcm² 
 bearing lifetime: 3.6 x 10^9 revolutions 
 max. angular acceleration: 500,000 rad/s² 
 shaft material: stainless steel 
 flange material: aluminum 
 housing material: die-cast aluminum 
 start up torque with shaft seal: 2.5 ncm 
 start up torque without shaft seal: 0.5 ncm 
 operating torque with shaft seal: 1.8 ncm 
 operating torque without shaft seal: 0.3 ncm 1) 
 shaft length: 19 mm 
 1) if the shaft seal has been removed by thecustomer   

electrical data
 operating voltage range: 10 v ... 32 v 
 mttfd: mean time to dangerous failure: 150 a (en iso 13849-1)1) 
 connection type: connector m23, 12-pin, radial 
 code type: binary, gray 
 code sequence: cw/ccw 
 power consumption max. without load: 0.8 w 
 1) this product is a standard product and does not constitutea
safety component as defined in the machinery directive.
calculation based on nominal load of components, averageambient
temperature 40°c, frequency of use 8760 h/a. all
electronic failures are considered hazardous. for more information,see

document no. 8015532.   

interfaces
 electrical interface: ssi 
 interface signals: clock +, clock -, data +, data-,programming

interface: rs-422 1) 
 clock frequency: 1 mhz 2) 
 set (electronic adjustment): h-active (l ≡ 0 - 4,7 v, h ≡ 10- us v) 
 cw/ccw (counting sequence when turning): l-active (l ≡ 0 -1,5 v, h ≡

2,0 - us v) 
 parameterising data: number of revolutions, code type,electronic

adjustment, number of steps per revolution 
 1) for higher clock fre, choose synchronous ssi 2)    

ambient data
 emc: (according to en 61000-6-2 and en 61000-6-3) 
 enclosure rating: ip 43 (according to iec 60529), withoutshaft seal,

on encoder flange not sealed, ip 65 (according to iec 60529),without

shaft seal, on encoder flange sealed, ip 67 (according to iec60529),

with shaft seal 1) 2) 3) 
 permissible relative humidity: 98 % 
 working temperature range: -20 °c ... +85 °c 
 storage temperature range: -40 °c ... +100 °c, withoutpackage 
 resistance to shocks: 100 g, 6 ms (according to en60068-2-27) 
 resistance to vibration: 20 g, 10 hz ... 2,000 hz (accordingto en

60068-2-6) 
 1) 2) 3) with mating connector fitted   

本产品的品牌是sick/施克，型号是atm60-a4a12x12,1030001，结构类型是放大器分离型，检测方式是漫反射式，电源电压是220（v），输出方式是npn，使用环境温度是60（℃），产品认证是ce，用途是钢铁行业专用编码器，加工定制是否