纸箱生产设备单面瓦楞纸箱纸箱机械设备单面机甩刀机无轴承纸架
- 供应商
- 东光县新华包装机械有限公司
- 认证
- 加工定制
- 是
- 型号
- 1600
- 外形尺寸
- 3500*7500*1650(mm)
- 联系电话
- 86-03177662133
- 手机号
- 13730580168
- 经理
- 王忠荣
- 所在地
- 中国 河北 东光县 东光县连镇镇住洼工业区
sf-bw外吸式单面机
sf-bw outer-adsorbed single facer
technical parameters
* 工作幅宽workingwidth: 700-1600mm
* 工作气压workingair pressure: 0.6-0.9mpa
* 总功率totalpower:17。5kw
结构特点structuralfeatures
* 导纸方式采用风力吸附,保持瓦楞楞型的稳定。
* thismachine adopts the wind adsorption to keep the stability offlutes.由风机通过真空箱将瓦楞纸吸附在中瓦楞辊180度范围内形成负压区,来完成瓦楞的轧制。
* thecorrugated paper is adsorbed to the middle corrugated roller toform a negative pressure zone of 180°and then to finish the rollingof corrugation through the vacuum box by fan.
* 下瓦楞辊吸风槽宽不超过2.6mm,可减免单面瓦楞纸板条纹痕迹。
* thewidth of suction slot of lower corrugated roller is not more than2.6mm, able to reduce the stripe mark on single side corrugatedcardboard.
* 该机器采用链条传动。
* themachine adopts chain transmission.
* 采用自动循环供胶,气动上胶及复位,具有缓冲效果。
* thismachine adopts auto-cycle glue supply and pneumatic control gluesupply and return, making it be characterized by bufferingeffect.
* 上胶辊表面经过特殊网纹刻花及镀铬处理。
* theglue roller surface is treated with special mesh nicking andchrome-plating.
* 上下瓦楞辊采用48crmo合金钢制造,经过热处理,硬度在hrc58-62°表面经研磨,并进行镀铬处理。theupper and lower corrugated rollers are made of 48crmo high steel. after heat-treatment, the hardness can be up tohrc58-62.the surface is grinded and chrome plated.
* 楞型fluteprofile: b flute.
主要部件参数parameters of mainparts
* 上、下瓦楞辊直径:φ268mm
压力辊直径:φ268mm,45号无缝钢管淬火处理
* uppercorrugated roller: φ268mm lower corrugatedroller: φ268mm
pressure roller: φ268mm 45# seamless steelpipe, quenched
* 上胶辊直径:φ210mm,45号无缝钢管,表面经特殊网纹刻花及镀铬处理
* glueroller: φ210mm 45# seamless steel pipe, surface treatedwith special mesh nicking and chrome-plating
* 刮胶辊直径:φ120mm,20号无缝钢管
* gluescraping roller: φ120mm 20# seamless steelpipe
* 预热辊直径:φ268mm,济钢20g钢
* pre-heatingroller: φ2684mm 20gjigangsteel
原材料和外购件raw materials andbought-in components
* 两侧墙板及底座材料:ht200,河北产
* sidewallboards and base: casting ht200, place of origin: hebei
* 传动部底座材料:槽钢焊接baseof transmission parts: welded by channel
* 电器类:施耐德electricappliances:schneider
轴承:哈尔滨、洛阳或瓦房店产bearings: produced in harbin,luoyang or wafangdian.
本产品的加工定制是是,型号是1600,外形尺寸是3500*7500*1650(mm),产地是河北东光,品牌是新华振,包装是无,重量是7500(kg)
展开全文