designation品名：dcsocket
model型号：
edition版本：01
page页码：1 of 2
1.0构造tectonic
a型状、尺寸依照制品图而规定.
shape, size in accordance with the provisions of mapproducts.
b外观:各部位应良好无秤锈、裂痕、电镀不良现象.
appearance: the good parts should weigh no rust, cracks, electroplatingill.
2.0使用环境条件theuse of environmental conditions
a环境湿度humidity:25℃~+70℃
b相对湿度relativehumidity:≤93%(+40℃)
c机械性能mechanicalproperties
d动作力powermoves:3~25n
e端子强度terminalstrength
各端子在各方面承受500克力作用下,在10秒内,无脱落、破损等不良现象,但弯曲也可.
theterminals in all aspects under 500caledon role, in 10 seconds,without any loss, damage and other negative phenomena, but alsobending.
4.0电气性能electricalperformance
a额定电流currentratings:dc 12v1a .
b接触电阻contactresistance:50mω以下.
c绝缘电阻insulationresistance:
在端子之间各端子与壳之间加ac500v条件下,持续1分钟测试.100mω以上.theterminal between the terminal and shell in between 500v acconditions, sustained a minute test ω m above .100.
d抵抗电压resistancevoltage:
在端子之间端子与壳之间加ac 500v60hz条件下,持续1分钟测量.无击穿现象出现.inbetween the terminal and the terminal shell in between ac 500v 60hzconditions, sustained a minute measurement. no breakdownphenomenon.
5.0可靠性试验reliabilitytest
a寿命试验lifetest
以涂有薄层润滑脂的插头(涂润滑脂防止摩擦过热)以每分钟15~20次,无负载插座拨出5,000次，符合规格3.0和4.0规定值.coatedwith a thin layer of grease plugs (tu grease prevent frictionoverheated) per minute to 15 ~ 20, a no-load socket allocated5,000, with the specifications 3.0 and 4.0 providesvalue
b温度试验temperaturetest
将插座放置于40±2℃,相对温度90%~95%环境中,96个小时后取出,取去水滴,将插座放置于常温常湿环境中,于30分钟内测试,符合规格3.0和4.0要求.socketto be placed on the 40 ±2℃, relative humidityof 90% ~ 95% of the environment, 96 hours after the removal, takinga drop of water, will be placed in the socket temperature often wetenvironment, in the test within 30 minutes, with 3.0 and 4.0specifications re
c耐热试验heattest
将插座放置于70±2℃环境下,96个小时后取出,将插座放置于常温常湿环境中,于30分钟内测定,符合规格3.0和4.0要求.socketto be placed on the 70 ±2℃environment, 96 hoursafter the removal of sockets placed on the temperature and moistureenvironment, within 30 minutes measured with 3.0 and 4.0specifications re
d耐寒试验hardytrial
将插座放置于-40±3℃环境中,96个小时后取出,取去水滴,将插座放置于常温湿环境中.于30分钟内测定,符合规格3.0和4.0要求.
socketto be placed on the 40 ±3℃environment, 96 hoursafter the removal, taking a drop of water, will be placed in thesocket regular temperature and humidity environment. within 30minutes measured with 3.0 and 4.0 specificationsre
5.5耐焊接热试验thermalresistance welding test
插座耐焊接热试验中,符合规格3.0和平共处4.0要求.
socketwelding thermal resistance test, with the specifications re 3.0 peaceful coexistence.
a自动焊;温度235±5℃,时间5±1秒.automaticwelding; temperature of235℃± 5, ± a time fiveseconds.
b人动焊;温度350±10℃,时间3±0.5秒.peopleto welding; the temperature of 350 ±10℃for 3 ± 0.5seconds.
本产品的加工定制是否，品牌是hj，型号是dc-091，额定电流是1（a），额定电压是12（v），环境温度是耐高温260度（℃），壳体材质是尼龙，pbt,lcp,abs，导电体材质是磷铜，猛钢，产品认证是rohs,reach