TS-RP16K4RP电位器旋转电位器电位器 带开关

防尘防潮性能好,附m10-6塑胶螺纹轴套,回转手感好,绝缘性能耐电压性能好,附带轻触开关,适用于数位化的程式控制;同时也可组装成陶瓷金属膜电位器,适应高功率场合需求

1.general

1.1application: this specification is applied topotentiometers used for electronic

     equipment.

1.2standardatmospheric conditions

  unlessotherwise specified,the standard rangeof atmospheric conditions for making

measurements andtest is per the following limits:

  ambient temperature ：15℃ to 35℃

   relativehumidity   ：25% to 75%

   airpressure        ：86kpa to 106 kpa

1.3operatingtemperature range   ：-10℃  to  +50℃

1.4storagetemperature range     ：-15℃ to  +70℃

1.5suggestedstorageperiod      ：about 6 months

2．electronic specification :

item

conditions

specifications

2.1

total resistance

measurement shall be made by theresistance between terminal 1 and 3 with lever settled at terminal1 or 3.

 10kω

2.2

total resistance

tolerance

±20%

2.3

resistance taper

measurement shall be made by theresistance law method.measurement stall be made at the position ofright diagram from the edge at the side of terminal 1.when based onterminal 3.  from the edge at the side of terminal3.

out voltage betweenterminals2and3

---------------------------------------------------x

applied voltage between terminals1and 3

b

2.4

residual resistance

full ccw & full cw

      max 10ω

2．electronic specification :

item

conditions

specifications

2.6

rated voltage

rated voltage e=√p.r (v)

p: power rating

r: nominal totalresistance

when the rated voltage exceedsthe maximum operating voltage, the maximum operating voltage shallbe the rated voltage

ac 200 v

2.7

rotational noise

dc 20v,when the rated voltage is20v or less, its rated voltageshall be applied to the terminals between 1 and3.and then the procedures, refer to iec393-1-4.15   traveling speed:20=/sec

less than  47mv

2.8

insulation resistance

a voltage of 500v dc shall be applied for1min,afterwhich measurement shall be made

100 mωormore

2.9

withstand voltage

trip curr ant:2ma measuring frequency:50/60hz

500v ac for 1min.

without damage toparts,

arcing orbreakdown etc

3. mechanical specification:

item

conditions

specifications

3.1

total rotation angle

300°±5°

3.2

rotation torque

20∽300gf.cm

3.3

rotation stop

strength

5kgf.cm max

3.4

push-pull strength

5kgf.cm max

3.5

rotation life

15,000 cycles min

4. soldering conditions

4.1 manual soldering :

 temperature of solderingiron       ：300℃or less.

 application time of soldering iron :within 3s.

4.2 dip soldering

  printed wiring board: single-sided copper clad laminateboard with

thickness of 1.6mm .

■dimensions尺寸图/p.c.b.mounting hole detail线路板安装孔尺寸图

需要了解其它产品详细资料请直接电话（）或qq（632950171）旺旺（worldwalk）联系。

本产品的加工定制是否，品牌是worldwalk，型号是ts-rp16k4rp-xxk,l:18f，种类是带开关，用途是普通，材料是碳膜，性能是预调，阻值调节方式是旋转式，阻值变化方式是x式（直线式），标称阻值是500~1mΩ，额定功率是0.25（w），阻值允许偏差是±10（%），滑动噪声是47m（v），分辨率是100（%），零位电阻是10（Ω），接触电阻是5（Ω），绝缘电阻是≥100（mΩ），符合度是100