超纯水Tulsion MB-106UP

核子级抛光树脂 tulsion® mb-106 up

nuclear grade resin for production of ultra pure water

tulsion® mb-106 up 是由核子级强酸型阳离子tulsion t-46 及核子级

强碱型阴离子 tulsion a-33 以1:2 体积比的剂量比例 , 预先混合的混床级离子

交换树脂,专门提供给须要高纯水系统抛光用。tulsion® mb-106 up is a mixture

of strongly acidic cation resin tulsion t-46 in h+ form andstrongly basic

anion exchange resins tulsion a-33 in oh- form instoichiometric

e quantities.

tulsion® mb-106 up 是专门用于超纯水的后段的抛光处里。tulsion®

mb-106 up is designed for use in the final polishing forproduction of ultra pure

water .

tulsion® mb-106 up 适合用于电子产业 ，生产半导体及映像管产业等需要超纯水

的行业。具有高的交换容量及优越的物理特性。tulsion® mb-106 up is the ideal

choice for electronic industries which manufacturesemi-conductors and

television tubes etc. where ultra pure water is re theresin combines

high capacity with excellent physical properties

typical characteristics---------------------------------------- 基 本 特 性 tulsion® t-46(阳)

tulsion® a-33 (阴) 型式(type)

强酸性阳离子交换树脂 (strong acid cation exchange resin)

强碱性阴离子交换树脂 (strong base anion exchange resin)

主体结构(matrix structure)

苯乙烯(cross linked polystyrene)

苯乙烯(cross linked polystyrene)

功能基 (functional group)

硫酸基(sulfonic acid)

4级胺( ammonium type i)

物理性貭(physical form)

球状颗粒(moist spherical beads)

球状颗粒(moist spherical beads)

离子型式(ionic form supplied)

氢(hydrogen)

氢氧(hydroxide)

粒径范围(u.s.mesh in wet) 16 to 50 16 to 50

粒度范围 (particle size) 0.3 to 1.2 mm 0.3 to 1.2 mm

微粒含量(fines content)

穿过us 50 mesh小于0.5% (less than 0.5% passing through 50u.s.mesh)

穿过us 50 mesh小于0.5% (less than 0.5% passing through 50u.s.mesh)

总交换容量 (total exch. capacity) 1.8 meq/ml minimum of 99% inhydrogen form 1.0 meq/ml minimum of 90% in hydroxide form and lessthan 1% in chloride form

ph范围 (ph range) 0 to 14 0 to 14

允许温度 (temp. stability) 120°c 60°c

溶解率 (solubility) insoluble in all common solvents insoluble inall common solvents

溶出有机物(organic leachable) less than 0.2 mg kmno4 per ml of wetresin less than 0.2 mg kmno4 per ml of wet resin

密度backwash settled density approx.750 gm/liter

不纯物(impurities) fe=50 ppm(max) fe=50 ppm(max) cu=50 ppm(max)cu=50 ppm(max) pb=50 ppm(max) pb=50 ppm(max)

球粒强度(bead strength) avg. not less than 500g/bead by chatillontest (astm standard) avg. not less than 300g/bead by chatillon test(astm standard)