薄膜或片材卷绕机CE认证- EN 13418:2004+A1:2008详解-MD

1、薄膜或片材卷绕机欧盟ce认证指令

md机械指令：2006/42/ec

2、薄膜或片材卷绕机欧盟ce认证标准：

en iso 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

en 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

en 13418:2004+a1:2008 plastics and rubber machines - windingmachines for film or sheet - safetyre塑料和橡胶机械.薄膜或片材的卷绕机.安全要求

3、en13418:2004+a1:2008适用范围：

this european standard specifies the safety re for thedesign and construction of winding, unwinding and rewindingmachines for film or sheet manufactured from rubber, plastics andcomposite materials in respect of the significant hazards listed inclause 4.

a winding machine begins at the intake of the film or sheet intothe winding machine and ends at the discharge position of thereel(s).

an unwinding machine begins at the take-up position of the reel(s)and ends at the film or sheet take-off point.

a rewinding machine begins at the take-up position of the reel(s)and ends at the discharge position of the reel(s).

in some machines the winding, unwinding and rewinding functions maybe combined.

the following functional groups are covered by this europeanstandard:

 fixed point roll; film or sheet tension control; winding zone;reel change device; reel loading and unloading devices;

and the following additional e integrated into the windingmachine:

 spreader roll device; longitudinal cutting unit; slitting device;film or sheet alignment device; static eliminator.

technical safety re for the design and construction ofaids for lifting and handling, e.g., of winding cores or reels, arenot covered by this standard.

technical safety re for the design and construction ofthickness monitoring devices are not covered by this standard.

hazards due to electro-magnetic radiation, e.g., from the use ofthickness monitoring devices, are not covered by this standard.

toxic or chemical hazards and hazards due to dusts, fumes or gases,which could occur from the materials being wound are not covered bythis standard.

note directive 94/9/ec concerning e and protective systemsintended for use in potentially explosive atmospheres can beapplicable to the type of machine or e covered by thiseuropean standard. the present standard is not intended to providemeans of complying with the essential health and safetyre of directive 94/9/ec.

this standard applies to machines which are manufactured after thedate of approval of the standard by cen.

本欧洲标准规定了由橡胶、塑料和复合材料制成的薄膜或片材的卷绕、退绕和复卷机的设计和结构的安全要求，涉及第4条中列出的重大危险。

卷绕机从薄膜或片材进入卷绕机开始，到卷轴的排出位置结束。

放卷机从卷盘的收卷位置开始，到薄膜或片材取出点结束。

复卷机从卷盘的收卷位置开始，到卷盘的卸卷位置结束。

在某些机器中，收卷、退绕和复卷功能可以结合使用。

本欧洲标准涵盖以下功能组：

 定点滚动；薄膜或片材张力控制；缠绕区；卷筒更换装置；卷筒装载和卸载装置；

以及集成到卷绕机中的以下附加设备：

 摊铺辊装置；纵向切割单元；分切装置；薄膜或片材对准装置；静电消除器。

本标准不包括用于提升和搬运的辅助装置（例如绕组芯或卷筒）的设计和构造的技术安全要求。

本标准未涵盖厚度监测装置设计和施工的安全技术要求。

本标准不包括电磁辐射造成的危险，例如使用厚度监测设备造成的危险。

有毒或化学危害以及由于灰尘、烟雾或气体而造成的危害，可能是由受伤材料引起的，不在本标准范围内。

注：关于拟用于潜在爆炸性环境的设备和保护系统的94/9/ec指令可适用于本欧洲标准所涵盖的机器或设备类型。本标准并非旨在提供符合指令94/9/ec基本健康和安全要求的方法。

本标准适用于cen批准本标准后制造的机器。

4、en13418:2004+a1:2008 欧盟ce认证测试、检查项目

5、薄膜或片材卷绕机ce认证流程

1 提交ce申请

2 准备测试样机和技术资料

3 样机测试与整改

4 技术资料审核与整改

5 公告机构审核通过后，工厂获得ce证书

6 设备加贴ce标识，顺利在欧盟市场流通