灼热丝燃烧试验仪现货

product type: zrs-a

glow wire test apparatus meets the standard:gb/t5/iec 60695-2-12:2000

fire hazard testing - part tenth: basic test for electric andelectronic products glow wire hot wire method

glow wire device and the general test method

灼热丝燃烧试验仪

产品名称：灼热丝燃烧试验仪

产品型号：zrs-a

灼热丝燃烧试验仪满足标准：gb/t5/iec 60695-2-12:2000

电工电子产品着火危险试验第10部分：灼热丝热丝基本试验方法

灼热丝装置和通用试验方法

product overview:

glow wire test apparatus using the latest technology, to meetthe current national standard, according to gb/t5/iec60695-2-12:2000, an essential instrument for fire hazard testingfor electric and electronic products such as home appliances andmaterials, is to detect the wall switch, plug, socket,multifunctional leakage protector, ideal instrument for current,voltage meter casing detection.

产品概述：

灼热丝燃烧试验仪采用新技术，满足现行国家标准，符合gb/t5/iec60695-2-12:2000，用于对电工电子产品家电及其材料等进行着火危险试验的必备仪器，是检测墙壁开关、多功能插头、插座、漏电保护器，电流、电压表外壳检测的理想仪器。

combustion tester technical parameters of glow wire:

1, glow wire:? 4mm ± 0.04mm, ni/cr (proportion 80/20) specialstandard circular, horizontal static, thermocouple:? 1.0mm, k, thebritish imported insulation type high temperature resistantarmoured thermocouple, armoured units heat 1200 ℃ (better than thestandard 1050 ℃) all the instruments of key components are importedand domestic brands!

2, hot wire electric heating temperature: 100 ℃ ~ 1050 ℃(digital display can be preset), fluctuation of temperature <5 ℃(than)

3, the sample on the glow wire test pressure: 1.0n ± 0.1n(better than the standard 1.0n + 0.2n)

4, the maximum hot depth: 7mm ± 0.5mm (adjustable)

5, specimen moving speed: 10mm/s ~ 25mm/s

6, the test of time: 30s ± 0.1s (1s ～ 999.9s display can bepreset)

7, igniting the lay plate thick: the board covered withstandard silk paper thickness 10mm (12g/m2 ~ 30g/m2), placed on theleft under the hot wire 200mm ± 5mm

8, the combustion zone volume 0.5 cubic meters, blackbackground, background illumination ≤ 20lux, exhaust hole:100mm?

9, overall dimensions: 1160 x 550 x 1050 (w * d * h) mm

10, power: 1kva/220v/50hz

the test instrument features glow wire:

1 temperature self checking function, when the temperature isgreater than the hot wire temperature 1050 degrees, alarm,prompting temperature operators cut.

2 in the course of the experiment, when the set of burningtime, heating voltage automatic shutdown, automatic experimentalcar left, away from the glow wire.

3 temperature control stability, easy control.

灼热丝燃烧试验仪技术参数：

1、灼热丝：?4mm±0.04mm，ni/cr(成分比例80/20)特制标准环形，卧式静置，热电偶：?1.0mm，k型，英国进口绝缘式耐高温铠装热电偶，铠装套耐热1200℃(优于标准1050℃)所有仪表关键元器件均采用进口及国产！

2、灼热丝通电加热温度：100℃～1050℃(数显可预置)，温度波动<5℃（优于标准）

3、试品对灼热丝试验压力：1.0n±0.1n(优于标准1.0n±0.2n)

4、大烫入深度：7mm±0.5mm(可调节)

5、试品移动速度：10mm/s～25mm/s

6、试验时间：30s±0.1s(1s～999.9s数显可预置)

7、引燃铺垫板厚：采用厚10mm的白松木板外覆标准绢纸（12g/m2～30g/m2），放置于离灼热丝下200mm±5mm

8、燃烧试验区容积0.5立方，背景黑色，背景照度≤20lux，排气孔：?100mm

9、外形尺寸约：1160×550×1050(宽*深*高) mm

10、电源功率：1kva/220v/50hz

灼热丝燃烧试验仪产品特点：

1.过温度自检功能，当温度过高大于灼热丝安全温度1050度时，报警器报警，提示操作人员温度下调。

2.实验过程中，当达到设定的灼热时间时，加热电压自动断开，实验小车自动离开，脱离灼热丝。

3.温度调节稳定，易于控制。