话务电话机，话务耳机,前台耳机,电话拨号器 电话耳机

1. 高清晰的语音通信，麦克风（ mic ） 防噪音
2. 方便实用的耳机支架
3. 30 个 16 位来电号码查阅
4. fsk 及 dtmf 来电显示，自动检测
5. 背光使用指示，来电振铃时，背光灯闪烁指示
6. 来电铃声音量调节或关闭选择
7. 智能通话闭音，并有指示灯指示
8. 来电手动和自动摘机选择，并有指示灯指示
9. 录音接口，可以将双方的通话送到电脑的声卡进行录音，或接插监听耳机
10. 无需外接电源，均可以使用
11. 黑色单机

主要功能   mainfunction 

øfsk/dtmf双制式来电显示      fsk/dtmfdual system incoming phone displayø5组去电号码存储            5 group of dialled calls memoryø一组32位自动ip            a group of 32 digital auto ipø5位区域码，2位出局码       5 digital area code, 2 digital out codeøflash时间可调               flash time control

铃声大小可调              ringervolume control

ø耳机、手柄发送可调          earphoneand handle sending control

耳机、手柄受话音可调         headsetmicrophone and handle volume control

ø耳机、手柄开关切换功能      earhead and handle switch funtionø拨号方式开关选择            choise of dial style on-offø32位重拨                    32digital re-dail

安装方法及注意事项    fixing up method andattentions

1、使用前请先打开话机底部的电池盖，按“+”“-”极性装入电池，当显示模糊时应及时更换电池。

please open the battery cover on the bottom ofdevice before using. put the battery inside according to the + -polarity. please replace the battery on time when the display isbecoming slur

2、必须向电信局申请开通来电显示服务，本机才能正常接收来电信息

please apply for the display service at thetelecommunication office, then this device can receive  allincoming calls info normally

3、电话机应安装在干燥、通风、无腐蚀气体的地方. please fix the machinein the suitable place like  dry,aeration, no corrodent gas.

 

话机功能 ppf\\ob`phonf

见下图  see picture asfollow

 

 

（图）

1        来电指示灯——当有来电时，此灯会点亮； incoming call direct light--- the light will be on for incomingcall

2        工作指示灯——当在通话时，此灯会点亮；working direct light–the light will be on whencalling

3        数字钮“1～#”；number button

4        液晶显示屏——显示相应的内容；lcdscreen -  display the related content

5        set键——按此键进入设置状态；setkey–press thiskey for the setting

6        hold键——摘机状态下，按此键进入音乐保留状态，如果要进行通话，再按此键；  

hold key–under the state of picking up, it will keep themusic. if want to get through, then press the keyagain

7        flash键——按此键电话机会收线一次；

flash key- the device will hang up if press thiskey

8        redial键——按此键重拨刚才你所拨出去的号码；redial key–pressthis key to redial the former phone no

9        on-hook键——此键按下表示摘机，此键弹出表示挂机；on-hookkey–on meanspicking up,

10     del键——按此键删除你不要的内容或退出设置状态；delkey- delete the content you don’t need or exit from thesetting.

11     out键——按此键查询去电号码和通话时间；outkey–check thedialed calls and time

12     down键——按此键向前翻查来电号码；downkey–check theincoming calls onwards

13     up键——按此键向后翻查来电号码；upkey–check theincoming calls backwards

14     rec——录音接口          rec–recordinterface

15     tel/line——外线接口     tel/line–exterior line interface

16     extension——分机接口    extension–extensioninterface

17     handset——手柄接口      handset–handleinterface

18     headset——耳机接口      handset–earphoneinterface

19     vol——耳机、手柄受话音音量调节，向“+”方向旋转表示音量逐渐变大，向“-”方向旋转表示音量逐渐变小；

 vol–earphone, handle volume control, + larger. -smaller

20     耳机、手柄开关切换——开关打到“”表示用耳机打电话，开关打到“ ” 表示用手柄打电话；

 earphone, handle swift--“ ”means calling byearphone. “ ”means calling by handle

21     flash时间调节——开关调至600，表示flash时间是600毫秒，开关调至300，表示flash时间为300毫秒，开关调至100，表示flash时间为100毫秒；flash time control- turn to 600, the flash time is 600 millisec.turn to 300.the flash time is 300 millisec. turn to 100, the flashtime is 100millisec

22     拨号方式开关——打到“t”表示音频拨号，打到“p”表示脉冲拨号。dial swift–t:frequency dial. p :implusedial

23     铃声大小调节——打到“h”表示大档，打到“l”表示小档；ringvolume control- h hight. l less

24     mic——耳机、手柄发送大小调节，向“+”方向旋转表示发送逐渐变大，向“-”方向旋转表示发送逐渐变小；

  mic–earphone, handle sending control. + larger.–:smaller

25     摘挂机开关——推上去为“摘机”，推下来为“挂机”。on-off swift : on is picking up, off is hangingup

 

话机设置  phonesetting

设置方法   settingmethod

1、待机状态下，按“set”键进入设置状态。on standby, press set key tosetting

2、按“up”、“down”键改变设置项目和修改设置参数，某项设置完成后，按“set”键确认并进入下一个设置项目。

press up, down key to set the program andspecification. when finishing one setting, press set key forconfirm and move on for the next step

3、在设置过程中按“del”键退出设置状态；during the setting, pressdel key back to the setting state

设置内容 content setting 

1、设置日期/时间：按“set”键液晶屏提示“set 1date”按“set”键确认进入日期/时间设置，年在闪烁，按“up”、“down”键进行修改后，按“set”键确认。进入月份设置，方法与年的设置相同。依次修改日、时、分的设置。

set date/time: press setkey,  the lcd screen will display “ set 1 date “, then pressset key to confirm, then enter the date time setting.  year isshining, press up and down key to adjust, then press set toconfirm. then to moth setting, same way as year setting. in turn todate, hour, and minutes setting

2、区号设置：液晶屏提示“set 2code”按“set”键确认，液晶屏显示“code-----”，按“up”、“down”键修改第一位区号，完成后按“set”键进入第二位区号修改，以此类推。

code setting: lcd screenshows set 2 code, press set for confirm, screen shows code---,press up, down key to change the first digital code, then press setfor the second digital after finish the first step. and soon

备注：设置本地区号后，如本地来电有区号时会不显示，以方便回拨。

remarks: after setting the local code, itwon’t displaythe code when incoming call from local for convenient to dialback.

3、出局码设置：液晶屏提示“set 3 pcode”按“set”键确认，液晶屏显示“pcode--”，按“up”、“down”键修改第一位出局码，完成后按“set”键进入第二位出局码修改，以此类推。

out code setting: thescreen shows set 3 pcode, press set key for confirm, screen showspcode---, press up down key to revise the first out code, afterfinishing, then press set for the second digital outcode.

  4、自动ip设置：液晶屏提示“set 4 auto ip”按“set”键确认，液晶屏显示“auto ip  off”，按“up”、“down”键选择自动ip开或关，选择“auto  ip on”，按“set”键确认，液晶屏提示“inputcode”，此时根据不同电信公司ip服务的不同方式输入特服号码、卡号、密码，输入过程中，可用“del”键进行修改，输入完毕按“set”键确认。

automatic ip setting: the screen shows set 4auto ip, press set key for confirm, screen shows auto ip off, pressup down key for choosing automatic ip on or off, choose auto ip on,press set for confirm, the screen shows input code, then accordingto the different way of ip service of different telecommunicationcompanies, input the service no, card no, code, during the processof inputting, it is possible to revise with del key. afterfinishing inputting, press set key for confirm.

操作说明 operating guide

来电号码 incoming callsno

接收  receiving

当有来电显示信息发送到本机，话机能自动识别来电制式，过滤掉本地或手机前的长途区号，并显示到话机的屏幕上。zui多可显示12位来电号码。

when incoming call info send to the device, themachine will automatically recognize e the callingmodel, 

来电查询  check dialedcall

在待机状态下，按“up”、“down”键查询来电情况，按“up”键从zui后一组向前查询，按“down”键从第一组向后查询。

onstandby, press up down key to check the incoming calls, press upkey is to check forward from the last one, press down key is tocheck backward from the first one.

去电号码查询  dialed phone numbercheck

待机状态下，按“out”键，查询去电号码（zui多可显示16位），及通话时间。

onstandby, press out key, check the dialed calls no. ( maximum 16digital) and the calling time

来、去电号码删除  incoming and dialed phone nodelete

在查询到某组来电、去电号码，可按“del”键，删除本组号码。按住“del”键3秒，可删除全部来电号码或去电号码。when checking the incomingor dialed phone no, press del key to delete this no.  pressdel key for 3 seconds, it could delete all incoming or dialed phoneno.

hold键  hold key

在摘机状态下，按“hold”键，则进入音乐保留状态，并有音乐发送给对方，同时对方不能听到你的声音。若要重新通话，只要按“hold”键即可。

onthe state of picking up, if press hold key, it will keep the music,and meanwhile send the music to the other side, however, the otherside cannot hear your voice. if want to get through again, justpress the hold key

redial键   redialkey

1、在摘机状态下按“redial”键，重拨前次所拨号码（zui大32位）。

on the state of picking up, to press the redialkey, it will redial the last dialed phone number (maximal32digital)

 

2、在挂机状态预拨号后，按“redial”键，则自动摘机拨出预拨号码。（若设置了出局码，且预拨号码大于或等于6位，则自动摘机拨出出局码后延时3.6秒再拨出后面的号码。）

on the state of hanging up, press redial key, itwill auto dial the phone no. (if setting out code, and the phone nois equal or more than 6 digital, it will auto pick up and dial theout code, after 3.6 seconds, it will dial thelatter.

3、挂机来电查询状态，按“redial”键，则自动摘机拨出显示的号码；连续按两次“redial”键，则在来电号码前自动加“0”回拨。（若设置了出局码，当查询到的来电号码，按“redial”键，则自动摘机加拨“出局码”并延时3.6秒后再拨出显示的号码；连续按两次“redial”键，则在号码前自动加拨“出局码”+3.6秒+“0”。之后重拨也会自动加拨“出局码”并延时3.6秒后再拨出显示的号码。）

on the state of hanging up & checking, pressredial key, it will auto pick up and dial the displayed  phoneno. if  press redial twice, it will auto dial out code +3.6seconds + 0.if redial,it will auto pick up and dial the outcode, after 3.6 seconds, it will dial thelatter.

 

4、摘机来电查询状态，按“redial”键，话机自动收线一次后拨出显示的号码。（若设置了出局码，当查询到的来电号码，则加拨“出局码”并延时3.6秒后再拨出显示的号码）

on the state of picking up and checking incomingcall, press redial key, the devie will hang up once, then dial thedisplayed phone no. (if setting out code, if checking the incomingcalls, it will auto pick up and dial the out code, after 3.6seconds, it will dial the displayed phone no).

 

5、挂机去电查询状态，按“redial”键，将自动摘机拨出显示的号码；摘机去电查询状态，按“redial”键，话机自动收线一次后拨出显示的号码。（若设置了出局码，当查询到的去电号码首1～3位是出局码时，回拨、重拨及追拨时拨完“出局码”后延时3.6秒后再拨出显示的号码。）

on the state of checking dialed calls, presssredial key,it will auto pick up, and dial the displayed phone no.one the state of picking up and checking dialed call, press redialkey, the device will auto hang up once and then dial the displayedphone no; (if setting out code, when the 1-3 digital of the checkeddialed call is out code, dialed the out code, after 3.6 seconds, itwill re dial the displayed phone no when calling back, redialing,calling. 

flash键   flashkey

在摘机状态按此键话机将自动收线(600/300/100毫秒可选).

inthe state of picking up, press flash key will hang up(600/300/100milli-sec available)

 

"话务电话机，话务耳机,前台耳机,电话拨号器 电话耳机"的品牌为oem