monprene®mp-2104
thermoplastic elastomer
teknor apex公司
产品说明：
monprene mp-2104 is a general purpose thermoplastic elastomerdesigned for a variety of consumer product applications re asoft, rubber-like feel. monprene mp-2104 is a low hardness, opa that exhibits excellent mold release, suitable for injectionmolding and extrusion.
物性信息：
基本信息
特性高弹性
良好的流动性
良好的柔韧性
良好的撕裂强度
良好的着色性
脱模性能良好
用途安全设备
把手
柔软的把手
体育用品
文具
消费品应用领域
牙刷柄
rohs 合规性rohs 合规
外观不透明
形式粒子
加工方法挤出
注射成型
物理性能额定值单位制测试方法比重0.878g/cm³astm d792熔流率（熔体流动速率）
astm d1238 190°c/2.16kg1.5g/10 minastm d1238 200°c/5.0kg18g/10 minastm d1238
硬度额定值单位制测试方法肖氏硬度
astm d2240 邵氏 a30
astm d2240 邵氏 a, 5 秒28
astm d2240
弹性体额定值单位制测试方法拉伸应力
astm d412 应变0.689mpaastm d412 300%应变1.34mpaastm d412抗张强度 (断裂)6.48mpaastm d412伸长率 (断裂)820%astm d412撕裂强度 - 流量 122.6kn/mastm d624压缩yongjiu变形 (23°c, 22 hr)12%astm d395
法律声明the information and recommendations contained in this bulletin are,to the best of our knowledge, accurate and reliable but noguarantee of their accuracy is made. all products are sold uponcondition that purchasers shall make their own tests to determinethe suitability of such products for their particular purposes anduses and purchaser assumes all risks and liability for the resultsof use of the products, including use in accordance with seller'srecommendations. nothing in this bulletin constitutes permission ora recommendation to practice or use any invention covered by anypatent owned by this company or others. there is no warranty ofmerchantability and there are no other warranties for the productsdescribed. for detailed product stewardship information, pleasecontact us. any product of teknor apex, including product names,shall not be used or tested in medical or food contact applicationswithout the prior written acknowledgement of teknor apex as to theintended use. please note that some products may not be availablein one or more countries.
注射额定值单位制
料筒后部温度182 到 232°c
料筒中部温度188 到 238°c
料筒前部温度193 到 243°c
射嘴温度199 到 249°c
加工（熔体）温度199 到 249°c
模具温度16 到 32°c
注塑压力1.38 到 5.52mpa
注射速度快速
背压0.172 到 0.689mpa
螺杆转速50 到 100rpm
垫层3.81 到 25.4mm
注射说明无需干燥。但如果湿度过大，则将粒料在150°f (65°c)的温度下干燥2-4小时。
挤出额定值单位制
料筒1区温度182 到 232°c
料筒2区温度188 到 238°c
料筒3区温度193 到 243°c
料筒4区温度193 到 243°c
料筒5区温度199 到 249°c
口模温度199 到 249°c
TPE,Teknor Apex ,MP2104,高弹性