欧盟电动自行车标准EN 15194

en 15194 <span class="font6"font-size:10px;font-family:arial;">电动自行车
this european standard applies to epac for private andcommercial use with exception of epac intended for hire fromunattended station.
this european standard is intended to cover all commonsignificant hazards, hazardous situations and events (see clause 4)of electrically power assisted bicycles, when used as intended andunder condition of misuse that are reasonably foreseeable by themanufacturer.
this european standard is intended to cover electricallypower assisted bicycles of a type which have a maximum continuousrated power of 0,25 kw, of which the output is progressivelyreduced and finally cut off as the epac reaches a speed of 25 km/h,or sooner, if the cyclist stops pedalling.
this european standard specifies re and testmethods for engine power management systems, electrical circuitsincluding the charging system for the assessment of the design andassembly of electrically power assisted bicycles and sub-assembliesfor systems having a rated voltage up to and including 48 v d.c. orintegrated battery charger with a 230 v a.c. input.
this european standard specifies safety and performancere for the design, assembly, and testing of epac bicyclesand subassemblies intended for use on public roads, and lays downguidelines for instructions on the use and care of suchbicycles.
this european standard applies to epac bicycles that have amaximum saddle height of 635 mm or more and that are intended foruse on public roads.safety re and/orprotective measures 安全要求与/或保护措施general (iso12100) 一般要求electricalre 电气要求electriccircuit 电路controls andsymbols 控制与标志batteries 电池batterycharger 电池充电器integrated battery charger(lvd)external battery charger (lvd certificatereview)electric cables andconnections 电线和联结wiring 布线powercables and conduits 电源线和导电管external and internalelectrical connections 内部和外部连接moistureresistance 防潮测试mechanical strengthtest 机械强度maximum speed for which the electricmotor gives assistance 辅助动力大速度start-upassistance mode 起动辅助模式powermanagement  功率管理maximum powermeasurementelectro magneticcompatibility 电磁兼容emission 电磁干扰immunity 抗干扰能力batterycharger 电池充电器failuremode 失效模式anti-tamperingmeasure 防篡改措施mechanicalresharp edges 锐边securityand strength of safety-relatedfasteners 与安全有关的紧固件的可靠性protrusions 突出物brakes 车闸braking-systems 制动系统hand-operatedbrakes 手闸attachment of brake assembly and cablere 车闸部件的安装和brake-levers position ofapplied force 闸把施力部位brake-block and brake-padassemblies-security test 闸皮和闸盒组合件-强度测试brakeadjustment 车闸的调整hand-operated braking system-strength test 手闸制动系统-强度测试back-pedal brakingsystem- strength test  脚闸制动系统-强度测试brakingperformance 制动性能brakes-heat-resistancetest 车闸-耐热测试back-pedal brake linearitytest 脚闸线性测试steering 车把handlebar- dimensions 把横管-尺寸handlebar grips andplugs 把横管的把套和把盖handlebar stem -insertion-depthmark or positive stop 把立管-插入深度标记或有效档块handlebarstem to fork steerer-clampingre 把立管对前叉立管-夹紧要求steeringstability 车把稳定性steering assembly-static strengthand security tests车把部件-静负荷强度和可靠性测试handlebarstem/handlebar and stem assembly-lateral bendingtests 把立管handlebar-stem-forward bendingtest 把立管-向前弯曲测试handlebar tohandlebar-stem-torsional securitytest 把横管对把立管-扭矩安全测试handlebar-stem tofork-stem-torsional security testbar-end tohandlebar-torsional securitytest 把端把对把横管-扭矩安全测试handlebar and stem assembly -fatiguetest 把横管和把立管组合件 - 疲劳测试frame 车架suspensionframe - special re 避震车架-特殊要求frame —impact test (falling mass) 车架-冲击测试(落重)frame andfront fork assembly — impact test (fallingframe)frame-fatigue test with pedallingforces 车架-脚蹬力疲劳测试frame-fatigue test with ahorizontal force 车架水平力疲劳测试frame-fatigue test witha vertical force 车架垂直力疲劳测试frontfork 前叉means of location of the axle and wheelretention 前轴和前轮的夹紧定位方式suspension fork - specialre 避震前叉-特殊要求tyre clearancetest 轮胎间隙tensile test 拉伸测试frontfork - static bending test 前叉-静弯曲测试front fork -rearward impact test 前叉-向后冲击测试forks made entirelyof metal 全金属前叉forks which have compositeparts 带合成材料前叉front fork - bending fatigue testplus rearward impact testforks intended for use withhub - or disc brakes 用于轮毂闸或盘闸的专用前叉tensile testfor a non-welded fork 非焊接前叉拉伸强度wheels andwheel/tyre assembly 车轮和车轮/轮胎组合件wheel/tyreassembly-concentricity and lateraltolerance 车轮/轮胎组合件-径向轴向圆跳动公差wheel/tyre assembly -clearance 车轮/轮胎组合件-间隙wheels - static strengthtest 车轮-静负荷测试wheels - wheelretention 车轮-车轮的夹持wheels - quick releasemechanisms 车轮-快卸机构rims , tyres andtubes 轮辋、外胎和内胎tyre inflationpressure 轮胎充气气压tyre and rimcompatibility   (iso5775-1/2) 轮胎和轮毂匹配度rim-wear 轮毂磨损greenhouseeffect test for composite wheels 复合材料温室效应frontmudguards 前挡泥板pedals and pedal/crank drivesystem 脚蹬和脚蹬/曲柄驱动系统pedaltread 脚蹬脚踩面pedalclearance 脚蹬间隙pedal/pedal spindle assembly -static strength test 脚蹬和脚蹬轴组合件-静符合测试pedal spindle- impact test  脚蹬轴-冲击测试pedal- dynamicdurability test  脚蹬-动态耐久性测试drive system -static strenght test 驱动系统-静负荷测试crank assembly -fatigue test 曲柄组合件疲劳测试drive-chain and drivebelt 传动链与传动带drive-chain 传动链drivebelt 传动皮带chain-wheel and belt-drive protectivedevice  链轮与皮带轮保护装置chain-wheel disc and drivepulley disc diameter 链轮盘与驱动盘直径chain and drivebelt protective device 链轮盘保护装置combined frontgear-change guide  整合式前轮拨saddles andseat-pillars 鞍座和鞍管limitingdimensions 限制尺寸seat-post — insertion-depth markor positive stop 鞍管-插入深度标记或有效档块saddle/seat-post —security test 鞍座/鞍管-安全性测试saddle — static strengthtest 鞍座-静负荷测试saddle and seat-pillar clamp-fatiguetest 鞍座和鞍座夹紧装置 - 疲劳测试saddle andseat-post clamp — fatigue test 鞍管疲劳测试spokeconnector 辐条保护盘luggagecarriers 衣架road test of a fully assembledbicycle 完整自行车路况测试lighting systems andreflectorswiring harnesslightingsystems （iso 6742‑1）reflectors （iso6742‑2）warning device 鸣号装置thermalhazards 热危害performance levels (plr) for controlsystem of epacs （iso 13849）list of significanthazards and performancelevels 重大危害列表与性能水平significanthazards 重大危害marking andlabelling 标签instructions foruse 使用说明书

turnaround time: normal(30 working days)
工作天: 普通件(30个工作天)
informaiton required for applytesting 测试必须信息
1. 整车测试：各紧固件的锁紧扭力
零部件测试：
车闸：自行车类型，各紧固件的锁紧扭力
车把：自行车类型，车把横管和立管的锁紧扭力
车架：自行车类型，车架头管下端到轮轴距离，车轮尺寸
前叉：自行车类型，前叉使用在多大的车轮直径上（24”, 26”, 650b,29”or700c，针对条款
车轮转动精度：自行车类型，车闸类型（intended forrim-brakes， not intended forrim-brakes）
脚踏：自行车类型
鞍座鞍管：自行车类型，鞍座锁紧扭力 产品标签，说明书
2. 关于反射器的测试iso6742‑2，客服同事须在进单前确认以下操作，三种情况其中一种，并在申请表中注明
 a.申请测试； 
  b.提供报告：报告须有结论，报告型号与实际反射器型号一致，有效期1年；
  c.此项目nt