316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环

316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环316s金属缠绕密封圈供应商，耐高温特氟龙金属缠绕垫，石墨垫环金属缠绕垫片的种类:

(一)基本型金属缠绕垫、

(二)带外环金属缠绕垫

(三)带内环金属缠绕垫

(四)带内外环金属缠绕垫

(五)换热器用(带筋)

(六)异形金属缠绕垫

金属缠绕垫片(基本型)采用sus304、sus316"v"形或"w"形金属带及其它合金材料与温石棉、柔性石墨、聚四氟乙烯、非石棉纤维等软性材料相互重叠螺旋缠绕而成，在开始及末端用点焊方式将金属带固定。

1.金属带材料

a. 采用厚度为0.15mm~0.25mm的08f，0cr13, 0cr18ni19ti, 0cr18ni9ti,00cr18ni10, 0cr18ni12mo2ti, 00cr17ni14mo2,201,304,316等冷轧钢带，或由供需双方协商确定。

b. 金属带为预成型的v型或w型窄带，表面应光滑.洁净，不应有粗糙不平.裂纹.划伤.凹坑及锈斑等缺陷

c.不锈钢的硬度值 hv≤200

d.一般的钢带的宽度是3.2mm,4.5mm,8mm,w型的钢带可以更厚。

e.不锈钢带形状:"v""w""sus""u"。

不锈钢带材质:a3,304,304l,316,316l,蒙乃尔，钛材ta。

2. 非金属带材料

a 非金属填充为特制的石棉带，柔性石墨带，聚四氟乙烯带，非石棉纤维带，陶瓷纤维及云母带等。带的厚度为0.3-1.0mm。

b. 特制石棉烧失量必须≤25%

c. 非金属带的氯离子含量≤100ppm

d.各类介质及各种非金属带的推荐使用温度及压力

e.一般的钢带的宽度是3.2mm,4.5mm,8mm

f.适应温度:-196℃-+870℃(柔性石墨)

≤+250℃(聚四氟乙烯)

≤+500℃(特殊石棉)

3.内外环材料

常用的有304ss,316lss,321ss,347ss,碳钢,钛,铜.

mix:

the flange on the pad designs to facilitate the installation of thecompany under the gasket-caliber size, the gasket external weldinga 2 ~ 8 positioning belt buckle for positioning hole in the flange,to prevent displacement installation gasket or falling out of thesupporting material and saving hours of work.

types and gasket materials

1, winding pads divided into four forms: that is, as the basic typea, b band strengthen ring, the c-band to strengthen the ring, thed-band, the strengthening ring.

2, the general use of materials

a strip: 0 cr13, 0cr18ni9 (304), 0cr18ni9ti, 1cr18ni9ti (321),0cr17ni12mo2 (316), 00cr17ni14mo2 (316l)

b, both inside and outside ring materials are a3, 304,316,316 l

c, non-metallic sandwich belt: flexible graphite ptfe, custom-madeasbestos.

使用范围: use of:

1、使用温度:-196℃-650℃ 1, the use of temperature: -196 ° c -650 ° c

(氧化介质中不高于450℃) oxidation medium does not exceed 450 ° c

2、使用压力≤ 26mpa 2, the use of pressure ≤ 25mpa

3、垫片厚度:2.5-4.5mm 3, gasket thickness :2.5-4.5 mm

性 能:

1、适用范围广。能耐高温、高压和适应超低温或真空下使用。

2、应用补偿能力强。在高温、高压波动频繁的工位上，密封性能稳定、可靠性强。

3、有良好的密封性能。

4、使用安装方便。

performance:

1, the scope of application-canton. can high temperatures, highpressure and adapt to ultra-low-temperature vacuum or use.

2, the ability of compensation. at high temperature, high pressurefluctuations fre, the sealing performance stabilityand reliability.

3, a good sealing performance.

4, the use of the installation convenience

折叠编辑本段垫片标准

hg20610-2009 化工部欧洲体系

hg20631-2009化工部美洲体系

gb/t4622.2-97国家标准

jb/t4719-92机械部标准

jb/t90-94机械部标准

jb/t4705-2000机械部标准缠绕垫片

sh3407-96 石油化工企业

asme b16.20 美标

din 德标

jis b2404-1999 jis ts-1998日标

bs 3381-1999英标金属缠绕垫片

折叠编辑本段技术参数

缠绕垫片系数

m=2.5-4

缠绕垫片使用压力

≤25mpa

缠绕垫片使用温度

-196℃-700℃(氧化性介质中不高于600℃)

缠绕垫片小预紧比压

y=68mpa

下表是缠绕垫片直径公差(即用于法兰的名义管道直径)

dim(mm)ansi b16.5

bs1560(mm)

mss sp-44api605公差内环内径

垫片内径<=600=24">=26" and<=34"±0.5>600 and <=800>24" and <=34>=36" and<=60"±0.9>800 and <=1600>34" and <=60"±1.3>1600>60" ±1.6垫片外径<=600<=24"<=24"±0.9>600 and<=160000>24" and <=60" ±1.81600>60" ±2.2外环外径 >1/2"and <=60"±0.9<=600=24" 0-1.0>600 and <=1000>24" and<=34" 0-1.8>1000 and <=1600>34" and <=60" 0-2.2

阅读全文