插销牢固度试验装置fp-1 apparatus to verify the fixation of pins in the bodyof the plug fp-1产品概述：本装置符合gb2099.1-2008图30、iec884-1图30、bs1363标准的要求，适用于对插头插销的牢固度进行检验。工位：一位； 砝码：50n1个、20n2个、30n1个、4n1个； 插座夹具：配gb/bs/usa插座等6个。 productsinformation product details:model fp-1. the plug is placed on arigid steel plate provided with holes suitable for the pins of theplug. the distances between the centres of the holes shall be thesame as the distances between the centres of the circlecircumscribed around the cross-sectional area of each pin in thestandard sheet of the plug. each hole shall have a diameter equalto that of the circle circumscribed around the cross-sectional areaof the pin plus (6 ± 0,5) mm. the plug is positioned on the steelplate in such a way that the centres of the circles circumscribingthe pins coincide with the centres of the holes. a pull p equal tothe maximum withdrawal force as given in table 16, is applied,without jerks, for 1 min on each pin in turn, in the direction ofthe longitudinal axis of the pin. the pull is applied within aheating cabinet at a temperature of (70 ± 2) °c, 1 h after the plughas been placed in the heating cabinet. after the test, the plug isallowed to cool down to ambient temperature and it shall beverified that no pin has been displaced in the body of the plug bymore than 1 mm. no.of test station: 1 weight:50n*1,20n*2,30n*1,4n*1 standard socked: bs socked*1,usa socked*1conform to standard: iec 60884-1 fig30, vde0620, bs1363