加拿大Discover蓄电池EV305A-A 通信系统 6V330AH机房电源

加拿大discover蓄电池ev305a-a 通信系统 6v330ah机房电源

放电
(1)电池不宜放电至低于预定的终止电压，否则将导致过放电，而反复的过放电则会导致容量难以恢复，为达到的工作效率使用寿命，放电应0.05-2ca之间。

(2)放电容量

放电容量与放电电流的关系，电池在不同的放电率条件下放出的容量，放电倍率越大，电池所能放出的容量越小。

safety: the technical terminal sealing structure andhigh-temperature curing sealant ensure that there is no acidcreeping at the battery terminals.

multiple installation methods: due to the special separatorabsorbing electrolyte, there is no free acid in the battery,ensuring that the battery can be installed in various directionssuch as vertical and horizontal.

电池的实际容量

电池在使用初期，其实际容量能达到额定容量，随着浮充使用时间延长，实际使用容量逐渐下降，低于电池的额定容量。

放电之后就不能再用充电方法使其恢复初始状态，这种电池称为原电池。铅酸蓄电池是有哪些部件组成。铅酸蓄电池主要由正极板组、负极板组、隔板、容器、电解液及附件等部分组成。极板组是由单片极板组合而成。单片极板又由基极(又叫极栅)和活性物质构成，铅酸蓄电池的正负极板常用铅锑合金制成。正极的活性物是二氧化铅，负极的活性物质是海绵状纯铅，极板按其构造和活性物质形成方法分为涂膏式和化成式。thecoated electrode plate is smaller in size, lighter in weight,simpler in manufacture, and cheaper in price than the formedelectrode plate at the same capacity. therefore, it is widely used;the disadvantage is that the active material is easy to fall offduring charging and discharging. therefore, the service life isshorter, and the advantage of the formed electrode plate is itsstructure.