突跳式温控器 KSD301 302 胶木 陶瓷
- 供应商
- 乐清市金尔达电器有限公司
- 认证
- 品牌
- 金尔达
- 型号
- KSD301302
- 开关类型
- 常闭
- 联系电话
- 86 0577 62257875
- 手机号
- 15067700253
- 所在地
- 乐清市南塘镇交通中路45-47号
品牌 | 金尔达 | 型号 | ksd301 302 |
开关类型 | 常闭 | 工作电压 | 220(v) |
过载电流 | 5-16(a) | 动作温度 | 40-180(℃) |
寿命 | 100000(次) | 产品认证 | vde |
ksd系列突跳式温控器是小型双金属片温控器,属温度继电器类器件。利用碟型双金属片在温度作用下产生瞬间跳动的原理,通过机构的作用,使触点迅速动作,达到断开或接通电路的目的。其工作温度固定,无须调整;动作可靠干脆,电弧小;使用寿命长;无线电干扰小。
ksd301snap action thermostat is small-size bimetal thermostatseries with a metal cap,which belongs to thermalrelays’family.themain principle is that one fumction of bimetal discs snap actionunder the change of sening temperature.the snap action of disc canpush the action of the contacts through the inside structure,thencaused on of off of the circuitfinally.the main characteristics arethe fixation of working temperature,the reliable snap action,lessflashover,longer working life and less radio interference.
技术参数technical parameters:
额定电流rated current(ir): 10a,15a;
额定电压rated voltage(ur):ac250v;
动作温度公关action temperature tolerance:±5℃
常态电气强度electric intensity:ac2000v 50/60hz历时1min,无击穿、无闪络for 1min;nobreakdon and no flashover
常态接触电阻contact resistance:﹤50mω
绝缘电阻lnsulation resistance:﹥100mω
响应速度response speed:≤1℃/min
寿命次数operation cycles:﹥30000次
动作及复位温度
动作温度
action temperature 复位温度
reset temperature 动作温度
action temperature 复位温度
reset temperature
45±5℃ 40±6℃ 130±5℃ 100±15℃
50±5℃ 43±6℃ 135±5℃ 105±15℃
55±5℃ 45±6℃ 140±5℃ 110±15℃
60±5℃ 50±10℃ 145±5℃ 115±15℃
65±5℃ 50±10℃ 150±5℃ 120±15℃
70±5℃ 50±10℃ 155±5℃ 125±15℃
75±5℃ 55±10℃ 160±5℃ 130±15℃
80±5℃ 55±10℃ 165±5℃ 135±15℃
85±5℃ 55±10℃ 170±5℃ 140±15℃
90±5℃ 60±10℃ 175±5℃ 145±15℃
95±5℃ 65±10℃ 180±5℃ 150±15℃
100±5℃ 75±10℃ 185±5℃ 160±15℃
105±5℃ 80±15℃ 190±5℃ 165±15℃
110±5℃ 80±15℃ 200±5℃ 170±15℃
115±5℃ 85±15℃ 210±5℃ 175±15℃
120±5℃ 90±15℃ 215±5℃ 180±15℃
125±5℃ 95±15℃ 220±5℃ 185±15℃
特殊规格可根据客户要求定做the specification can also be manufactured asrequest.
特殊规格可根据客户要求定做the specification can also be manufactured asrequest.
如超低和超高温度及特殊复位产品可根据客户要求协商订做
温度检测方法:
将试样两引线分别接在测试设备的夹具上,通上10ma左右的电流(不超过100ma),用一发光二极管指示电流的通断,然后将试样放入专用测温设备内,(测试设备内温度应均匀,加热升温速度可控制)温度计探头应贴近试样,控制检测设备温度以0.5~1℃/min的速率升温,当发光二极管熄灭时,记下温度计读数即为试样的动作温度。
展开全文