沙伯基础 PC/PBT 1102-BK1066塑料粒子
- 供应商
- 东莞市越泰新材料有限公司
- 认证
- 报价
- ¥18.00元每千克
- 沙伯基础
- 15 g/10 min
- 1102-B
- 熔指10
- 沙伯
- 9.0 kJ/m²
- 联系电话
- 180-98275951
- 手机号
- 13450060513
- 经理
- 龙军
- 所在地
- 东莞市樟木头莞樟路23号五号
- 更新时间
- 2024-05-28 08:10
沙伯基础 pc/pbt 1102-bk1066塑料粒子
polycarbonate + pbt
sabic innovative plastics
产品说明:
unreinforced pc/polyester alloy. excellent low temperatueimpact/chemical resistance to automotive fluids.
物性信息:
特性 | 耐低温冲击 耐化学性良好 |
用途 | 汽车领域的应用 |
加工方法 | 注射成型 |
多点数据 | coefficient of thermal expansion vs. temperature (astm e831) compressive stress vs. strain (astm d695) elastic modulus vs temperature (astm d4065) flexural dma (astm d4065) instrumented impact (energy) (astm d3763) instrumented impact (load) (astm d3763) pressure-volume-temperature (pvt - zoller method) shear dma (astm d4065) specific heat vs. temperature (astm d3417) tensile creep (astm d2990) tensile fatigue tensile stress vs. strain (astm d638) thermal conductivity vs. temperature (astm e1530) viscosity vs. shear rate (astm d3835) |
比重 | 1.20 | g/cm³ | astm d792 |
特定体积 | 0.835 | cm³/g | astm d792 |
收缩率 | 内部方法 | ||
流动 : 3.20mm | 0.80 到 1.0 | % | 内部方法 |
横向流动 : 3.20mm | 0.80 到 1.0 | % | 内部方法 |
抗张强度 1(屈服) | 54.5 | mpa | astm d638 |
伸长率 2(断裂) | 150 | % | astm d638 |
弯曲模量 3(50.0mm 跨距) | 1970 | mpa | astm d790 |
弯曲强度 4(屈服,50.0 mm 跨距) | 82.0 | mpa | astm d790 |
悬壁梁缺口冲击强度 | astm d256 | ||
-30°c | 640 | j/m | astm d256 |
0°c | 690 | j/m | astm d256 |
23°c | 800 | j/m | astm d256 |
载荷下热变形温度 | astm d648 | ||
0.45 mpa, 未退火, 6.40mm | 110 | °c | astm d648 |
1.8 mpa, 未退火, 6.40mm | 90.6 | °c | astm d648 |
干燥温度 | 110 | °c | |
干燥时间 | 4.0 到 6.0 | hr | |
干燥时间,*大 | 8.0 | hr | |
建议的*大水分含量 | 0.020 | % | |
建议注射量 | 50 到 80 | % | |
料筒后部温度 | 243 到 266 | °c | |
料筒中部温度 | 249 到 271 | °c | |
料筒前部温度 | 254 到 277 | °c | |
射嘴温度 | 254 到 271 | °c | |
加工(熔体)温度 | 260 到 277 | °c | |
模具温度 | 65.6 到 87.8 | °c | |
背压 | 0.345 到 0.689 | mpa | |
螺杆转速 | 50 到 80 | rpm | |
排气孔深度 | 0.013 到 0.020 | mm |
1 . | 类型 1, 50 mm/min |
2 . | 类型 1, 50 mm/min |
3 . | 1.3 mm/min |
4 . | 1.3 mm/min |
展开全文