除湿机转轮分切机 欧森科技自动化生产设备 适用所有行业

分切机是针对“圆饼形软料”平切、修边、分切开发的专机。用通俗的话语是将很宽的大卷的产品分切成不同宽度的产品。常用于造纸机械、电线电缆云母带及印刷包装机械。机器本身实用性强，应用产品广泛，因此可用于所有行业。

产品结构：机器由转盘装置、分切线刀、铣外圆刀、除尘系统，各传感器及各结构件等组成，分切设备在高速运转过程中，依托高精度伺服闭环进行稳定铣外圆、分切、平切控制，是理想的褶皱和筒形过滤袋自动化缝纫生产线上游设备。比如，在我们日常生活或生产中，可用于大幅面的布料检验切割，将布料按照实际需要切割成所需宽度。同时，采用了光电纠偏装置，采用大功率的电机能够适应不同布料的高速作业。

产品特点：

1、被动装置，可以控制较小的张力。

2、放卷光电纠偏，采用进口精密滚珠丝杆及滑轨，平行推进切割宽度，进口ac马达调整系统无级调整和控制切割速度，从而达到高精度切割，**度可控制在0.1毫米以内。
3、中英文操作界面，lcd显示屏，可直接输入几种载切割宽度和数量设定，并设有手动/自动转换功能，使操作更加简单便捷。
4、圆刀分切，质量可靠，调整方便;
5、切刀可使用工业手术刀片或平刀式（美工刀片），18mm-1600mm之间可调式刀具。
6、自动计数装置，定长自动停机，长度自动计米，一目了然。
7、采用快速放料设计，上料下料只须一个动作即可完成，有效降低生产中的劳动量，从而提高生产效率。
8、特别适宜于窄带(绝缘材料、云母带、薄膜等等)的分切。

另外，其主要的缺点是速度不能高，高速运行时易造成磁粉高速磨擦，产生高温，造成磁粉离合器发热进而缩短其寿命。因此，对于该设备的日常维护也要稍加注意，启动前的各项检查必须到位，同时工作人员记得戴好防护装置；作业结束后，要及时完成各项清洁与保养工作，注意各零件是否有松动，保证接地线可靠连接等。

日常维护保养：

1、 滑轨、齿条、齿轮、轴承等润滑部位每班检查运行状况，保证润滑油量充分并正常工作。

2、 每月定期检查链条、传动带有否松动。

3、每班检查螺丝及其他紧固件，发现松动及时紧固。

4、 复膜、拉纸皮辊不工作时应提到高位不要压在主动胶辊上，以免变形。拉纸复膜胶辊清洗时应用中性洗涤剂清洗，不能用汽油、松香水等擦洗以防提前老化。

5、 每班检查电器件及线路可靠连接保证正常工作，保证接地线可靠连接

6、保持电气箱内通风散热，避免潮湿及灰尘，清理电气箱内灰尘及脏污可用吸尘器并由电工进行。

作用概括：

1、根据用户要求，提供**的规格。

2、在分切放卷时，可对整个上道工序挤出复合时复合的大卷复合膜进行再次检验，看是否有质量问题。

3、可以纠正复合膜的错层或分切掉部分印刷和复合的缺陷，提高产品的等级率。

4、可以使成品展现完好的收卷状态。

综合以上，相信大家都认识到了分切这一工序的重要性，而在分切的过程中，我们要是想保证产品的质量，那么一台优良的设备，自然也就必不可少了。

公司简介：

杭州欧森科技有限公司是新能源领域生产工艺方案提供商及装备集成商，公司拥有技术成熟的研发团队，涉猎广泛国际工艺技术理念，精研锂电、燃料、钠盐电池工艺和机器人应用，熟悉各类电池行业生产工艺和物流，拥有丰富电池行业生产工艺布局设计经验和高端生产装备研发能力，能够为客户提供建厂工艺设计、设备选型、安装投产等交钥匙工程服务，可以为客户研发定制所需设备和自动化生产线等，公司主要产品均是实现无人值守和机器人应用的现代化全自动生产线。

主营业务：

公司主要生产设备有：分切机、复卷机、打磨机、氢燃料电池电堆、石墨双极板隧道炉。

the slitting machine is a specialized machine developed for flatcutting, trimming, and slitting of "circular cake shaped softmaterials". to use colloquial language is to divide a wide roll ofproduct into products of different widths. commonly used inpapermaking machinery, wire and cable mica tape, and printing andpackaging machinery. the machine itself has strong practicality anda wide range of application products, so it can be used in allindustries.

product structure: the machine is composed of a rotary tabledevice, a slitting cutter, a milling cylindrical cutter, a dustremoval system, various sensors, and structural components. duringhigh-speed operation, the slitting e relies onhigh-precision servo closed-loop for stable milling, slitting, andflat cutting control. it is an ideal upstream e forautomatic sewing production lines of folding and cylindrical filterbags. for example, in our daily life or production, it can be usedfor inspecting and cutting large format fabrics, cutting the fabricinto the required width according to actual needs. at the sametime, a photoelectric deviation correction device is adopted, and ahigh-power motor is used to adapt to high-speed operations ofdifferent fabrics.

productfeatures:

1. passive device that can control small tension.

2. the unwinding photoelectric deviation correction adoptsimported precision ball screw and slide rail, and the cutting widthis advanced in parallel. the imported ac motor adjustment systemsteplessly adjusts and controls the cutting speed to achievehigh-precision cutting, with * * degree controlled within0.1mm.

3. the chinese and english operation interface, lcd displayscreen, can directly input several cutting widths and , and is e with manual/automatic conversionfunction, making the operation more simple and convenient.

4. round knife cutting, reliable , easy adjustment;

5. industrial surgical blade or flat blade (art blade) can beused as the cutting knife, and the adjustable knife between 18mmand 1600mm can be used.

6. automatic counting device, fixed length automatic shutdown,length automatic meter counting, clear at a glance.

7. adopting a fast feeding design, loading and unloading can becompleted with just one action, effectively reducing labor inproduction and improving production efficiency.

8. especially suitable for cutting narrow bands (insulationmaterials, mica tapes, thin films, etc.).

dailymaintenance:

1. inspect the operation status of lubrication parts such assliding rails, racks, gears, bearings, etc. every shift to ensuresufficient lubricating oil and normal operation.

2. regularly check the chain and transmission belt for loosenessevery month.

3. check screws and other fasteners every shift and tighten thempromptly if any looseness is found.

4. when the laminating and paper pulling rollers are notworking, they should be raised to a high position and not pressedagainst the active rubber roller to avoid deformation. whencleaning the paper pulling laminating cots, neutral detergent shallbe used instead of gasoline, loose perfume, etc. to preventpremature aging.

5. each shift checks the reliable connection of electricalcomponents and circuits to ensure normal operation and reliableconnection of grounding wires

6. maintain ventilation and heat dissipation inside theelectrical box, avoid moisture and dust, and clean the dust anddirt inside the electrical box using a vacuum cleaner and by anelectrician.

functionsummary:

1. according to user re, provide * *specifications.

2. during the slitting and unwinding process, the large rollcomposite film compounded during the extrusion and lamination ofthe entire previous process can be re inspected to see if there areany issues.

3. it can correct the misplacement of the composite film or cutoff some printing and composite defects, and improve the grade rateof the product.

4. it can enable the finished product to display a completewinding state.

based on the above, i believe everyone has recognized theimportance of the slitting process, and in the slitting process, ifwe want to ensure the of the product, then a good eis naturally essential.

company profile:

hangzhou ousen technology co., ltd. is an advanced productionprocess solution provider and e integrator in the field ofnew energy. the company has a mature research and development team,covering a wide range of international process technology concepts,specializing in lithium battery, fuel, sodium salt batteryprocesses and robot applications. it is familiar with productionprocesses and logistics in various battery industries, and has richexperience in production process layout design and high-endproduction e research and development capabilities in thebattery industry, we can provide customers with turnkey engineeringservices such as factory process design, e selection,installation and production. we can also develop customizede and automated production lines for customers. our mainproducts are modern fully automated production lines that achieveunmanned and robot applications.

main business:

the company's main production e includes: slitter,rewinder, grinder, hydrogen fuel cell stack, graphite bipolar platetunnel furnace.