序号
serial no.部位
portion材料
material1主体
main body极性橡胶
polarized rubbre2内衬
lining尼龙帘布
nylon cord fabric3骨架
frame硬钢丝
hard steel wire4法兰
flange软钢
mild steel
技术条件technicalcondition型号 model
kxt（ⅰ）型
kxt（ⅱ）型
kxt（ⅲ）型
工作压力mpa(kg.f/cm2)
2.0(20)
1.2(12)
0.8(8)
workingpressure
爆破压力mpa(kg.f/cm2)
6.0(60)
3.5(35)
2.4(24)
burstingpressure
真空度 vacuity kpa(mmhg)
100(750)
86.7(650)
53.3(400)
适用温度 applicabletemp.℃
-15～+60
适用介质
空气、压缩空气、水、海水、热水、弱酸等。
applicablemedia
air,compressed ari,water, hot water, weak acid, etc.
接头两端可任意偏转，便于自由调即轴向或横向位移。both ends of the joint can be arbitrary deflected for freeadjustment of axial of lateral displacement.
注：dn200-300kxt-（ⅰ）型工作压力为1.5mpa(15kgf/cm2)
爆破压力为4.5mpa（45kgf/cm2）
note:the working pressure of model dn200-300 kxt-(ⅰ) is 1.5mps(15kgf/cm2) and the bursting pressure is 4.5mpa(45kgf/cm2)
公称通径、长度、位移数值与法兰主要数据表
table ofmainparameters of nominal core diameter, length, displacement valveand flange
公称通径
norminal
core diameter
dn长度
length
l
(mm)螺栓数
no.of
bolt
n螺栓孔直径
diameter
of bolt hole
(mm)螺栓孔中心圆直径
diameter of
bolt hole cen
ter circle d1
(mm)轴向位移
axial
displacement
(mm)横向位移
lateral
displacement
(mm)偏转角度
angle of
deflection
(α1+α2)mm(0寸 in)伸长
stretch压缩
compression32(1 1/4)95417.510069915°40(1 1/2)95417.5110610915°502105417.51257101015°65(2 1/2)1°80(3)°100(4)150817.5°125(5)°150(6)201415°200(8)252215°250(10)230122235016252215°300(12)245122240016252215°350(14)2552215°400(16)2552215°450(18)255202656516252215°500(20)255202662016252215°600(24)260203072516252215°700(28)260242681016252210°800(32)260243092016252210°900(36)2602430102016252210°1000(40)2602830112016252210°1200(48)26032330°1400(56)3003636°1600(64)3004036°1800(72)3004439°
注：其他标准或非标准法兰需另订协议，指明标准或提供图纸及有关数据，本厂可定制生产。
dn350～600为ⅲ型产品工作压力为0.6mpa
dn700～1800为ⅲ型产品工作压力为0.6mpa，
其法兰配备pno.6mpa(6ka级）
note:for flanges ofother standards or non-standard, it is
necessary to be agreed upon separately. please specify
standard or furnish diagram and relative parameter, we
will manufacture accordingly.
dn350～600 is modelⅲ, the working pressure is 0.6 mpa.
dn700～1800 working pressure is 0.6 mpa and the flange
is pn0.6 mpa(6ka class)