2B Technologies 臭氧分析仪Models 106-L, 106-M, 106-MH

ozone monitor models 106-l, 106-m, 106-mh and 106-h
for industrial ozone applications

for industrial ozone applications, 2b tech offers themodel 106-l, 106-m, 106-mh and 106-h ozonemonitors, where l, m, mh and h refer to low (0-100 ppm), medium(0-1,000 ppm)06-, medium-high (0-10,000 ppm) and high (0-20 wt%)ozone concentrations, respectively. these instruments havedifferent optical path lengths in order to accommodate an extremelywide range of ozone concentrations, spanning more than eight ordersof magnitude. additionally, the model 106-h was designed with aflow-through path that can be pressurized to up to 50 psi forin-line measurements with ozone generators. all four models areavailable in either a standard enclosure or industrialenclosure.  configurations for multi-channel sampling areavailable for models 106-l, 106-m, and 106-mh.
the model 106 series was designed as an "ozone monitor on a board"in which nearly all of the components are mounted directly to theprinted circuit board. thus, the model 106 may be purchased withoutthe enclosure for oem applications. see: modeloem-106.
the model 106-l is designed for ambient low measurements down tovery low ppb levels and has been designated by the epa as a federale method (fem) for monitoring for compliance with the usclean air act:  eqoa–0914–218.
ourvideo describes the different models and configurationsfor our model 106-series ozone monitors, and could help determinewhich model is best for a particularapplication.  click here orscroll down on this page to view the video.

specifications for different optical benches

modelrangeresolutionprecision & accuracy

106-l

0-100 ppm

0.0001 ppm (0.1 ppb)

higher of 0.0015 ppm (1.5 ppb) or 2% of reading

106-m

0-1,000 ppm

0.01 ppm

higher of 0.01 ppm or 2% of reading

106-mh

0-10,000 ppm (0-1 vol%)

0.1 ppm

higher of 0.05 ppm or 2% of reading

106-h

0-20 wt% o2 or air
0-14 vol%

0.01 wt%
0.01 vol%

higher of 0.01 wt% or 2% of reading

general specifications

measurement principleuv absorption at 254 nmmeasurement interval2 sdata averaging options2 s, 10 s, 1 min, 5 min, 1 hrflow rate~1 liter/min; up to 20 l/min for model 106-hdata storage32,736 lines (10 s avg. = 3.7 days; 5 min avg = 113days)choice of unitsppb, pphm, ppm, µg m-3, mg m-3 (for models106-l and 106-m)
ppm, mg m-3 (for model 106-mh)
vol%, wt% air, wt% o2, g/m3, g/nm3 (for model 106-h)data outputsusb, rs232, 0-2.5 v analog, 4-20 ma, lcddisplaypower re v ac, 50/60 hz
11-28 v dc, nominally 500 ma at 12 v dc, 6 watt for models 106-l,m, and mh
11-28 v dc, nominally 325 ma at 12 v dc, 3.9 watt for model106-hsize (standard enclosure)3.6 x 7.9 x 9.4 inches (9 x 20 x 24 cm)weight (standard and oem)4.2 lb (1.9 kg) for model 106-l; 2.8 lb (1.3 kg)for oem-106-l
3.9 lb (1.8 kg) for models 106-m, -mh; 2.5 lb (1.1 kg) foroem-106-m, -mh
4.4 lb (2.0 kg) for model 106-h; 2.9 lb (1.3 kg) for oem-106-hsize (industrial enclosure)16 x 14 x 9.3 inches (40.7 x 35.7 x 23.6 cm) h x (industrial enclosure)~14 lb (6.4 kg) depending on model and multichanneloptions

features

measurement based on uv absorption

low power consumption; can be battery operated (optionallithium-ion battery)

internal data logger with real-time clock

2-s measurement interval

on-board microprocessor with interactive menus includes dataaveraging options of 10 s, 1 m, 5 m and 1 hr

usb and rs-232 output of time/date, o3 concentration,internal temperature and pressure

analog output (0-2.5 v and 4-20 ma) of ozone concentration inuser selected units

two 2-level relays for control purposes (e.g., control of ozonesource or turn warning light on and off); four 2-level relays inindustrial enclosure models and in the 3-channel and 6-channeloptional configurations

long-life pump (15,000 hr) for models 106-l, 106-m and106-mh

bluetooth option for wireless data transmission

optional configurations for 3-channel or 6-channel air samplingfor models 106-l, 106-m, and 106-mh