mute多年专注于承压设备ped认证，en102043.1认证,en10204, 3.2认证，ped4.3认证等。帮助您一站式顺利取证。具备多个成功案例。经验丰富，助您顺利取证。做放心认证，找木特！期待与您合作。
凡是高许用压力超过0.5bar的设备，无论其压力、容积，公称直径变化，均须符合ce-ped认证要求。产品和设备诸如蒸压釜，灭火器、压力表、阀门、安全阀、塔器，管路系统、医疗灭菌设备等装载或输送流体的设备。对于符合承压设备的制造的承压材料需要符合欧盟金属材料检验文件类型：en10204-3.1 或en10204-3.2，产品诸如:阀体阀件，管道原件，板材，管道，封头，法兰，金属半成品等产品。
i
=
module a
ii
=
modules a2, d1, e1
iii
modules b (design type) + d, b (design type) + f, b(production type) + e, b (production type) + c2, h
iv
modules b (production type) + d, b (production type) + f,g, h1
i
=
module a
ii
modules a2, d1, e1
=modules b (design type) + d, b (design type) +f, b (production type) + e, b (production type) + c2, h
iii
modules b (production type) + d, b (productiontype) + f, g, h1
认证模式改变：
差异比对
97/23/ec
2014/68/eu
1
module a1 (internal manufacturing checks with monitoringof the finalassessment)
a2: internal production control plus supervised productchecks at random intervals
2
module b1 (ec design-examination)
b: eu type examination
eu-type examination – production type
eu-type examination – design type
3
module c1 (conformity to type)
module c2: conformity to type based on internal production control plus supervised pressure e checks atrandom intervals
备注:
1,由a1 模式改变为a2模式增加了认证机构的随机检验的要求,认证机构可以在生产流程过程中z执行随机抽检。
2,由b和b1模式改变为b模式包含了生产型式认可和设计型式认可。
3,由c1改变为c2同样是增加了认证机构的监督权力。
差异比对
97/23/ec
2014/68/eu
1
module a1 (internal manufacturing checkswith monitoring of the final assessment)
a2: internal production control plussupervised product checks at random intervals
2
module b1 (ec design-examination)
b: eu type examination
eu-type examination – production type
eu-type examination – design type
3
module c1 (conformity to type)
module c2: conformity to type based oninternal production control plus supervisedpressure e checks at random intervals
备注:
mute多年专注于承压设备ped认证，en102043.1认证,en10204, 3.2认证，ped4.3认证等指导服务。帮助您一站式顺利取证。具备多个成功案例。经验丰富，助您顺利取证。做放心认证，找木特！期待与您合作。