SG800三足式手动刮刀下卸料（下出料）离心机

类型三足离心机结构类型落地式布局形式立式适用对象塑料、粮食、沙子、泥土、石油、其他结构和分离要求分离机分离因素fr值范围高速离心机品牌巴拓型号sg800电机功率7.5（kw）外形尺寸（mm）重量2600（kg）应用领域化工、食品、制药、选矿、石油、煤炭、水处理、船舶、医用、制药、冶金、纺织、其他转鼓直径800（mm）转鼓转速1200（r/min）装料限量140kg产品类型全新用途工业用自动化程度手动

sgz/sg三足式刮刀下部卸料自动离心机

sgz/sg three-column scraper bottom dischargingautomatic centrifuge

■主要特点features

1、采用plc控制，程序设定，无人看护的自动化操作，加料、初过滤、洗涤、精过滤、卸料全过程监护。

2、变频调速，启动平稳，分离因数可调。

3、能耗制动，非接触式制动方式，无磨擦粉尘污染。

4、密闭结构，密封件采用硅橡胶或氟橡胶，离心机内腔氮气保护，可实现密闭防爆要求。

5、结构设计合理，在线清洗系统，保证了洁净度要求，符合gmp规范。

6、机电式料程控制。

7、安全保护：转速检测，过振动保护，电机过载过热保护，刮刀旋转、升降机械电气双重控制，刮刀与转鼓的联动锁定。

1、plcbased control with programmable setup automatic operation with nooperator attention monitors the whole process including feedingfirst cycle filtration, cleaning. intensive filtration anddischarging.

2、frequency converter for speed regulationmakes start smooth separation factor isadjustable.

3、dynamic braking non-touching brakingdoesn’t produce dusts.

4、leak-proof structure with silicone rubberor fluoroelastomers seats it is of anti-explosion with nitrogenprotecting the machine inside.

5、reasonable design of structure withautomatic online cleaning system ensures meeting clean re accordance with gmp standards.

6、programmed electromechanical feeding control.

7、safety protection: rotation rate detection.vibration protection, motor overload and overheat protection, dualcontrol with both electrical and mechanical to scrapers and thelifting device. interlocking the scraper and rum.

标准配置standard manufacturingform

1、结构：外壳配置翻盖及进料管、洗涤管、观察镜、排气口、照明孔；密闭结构，转鼓及外壳、翻盖等部件为不锈钢材料(sus304)制造。机座等为铸造件，表面包衬不锈钢。转鼓、外壳内外表面、机器外露件表面均抛光处理。

2、采用plc控制。

3、传动与制动：普通电机（或防爆电机）＋变频器＋能耗制动。

4、液压动作系统。

1、struclure: feeding pipe, washing pipe.observation window exhaust hole. inspection & repair holelightening hole have been applied in the turning over cover of theoutshell the sealing structure. rotating drum and outshell. turningover cover are all made of stainless steel(sus304). machine chassisparts are made of cast material, the surface is covered withstainless steel the rotating drum. inside and outside surfaces ofthe outshell. the exposed parts of the machine have all been polishtreated.

2、plccontrol is applied.

3、transmission and brake: normal motor(orexplosion prevention motor)+frequency modulator’ power consumptionbrake.

4、hydraulic operationsystem.

■选装配置device for choice

1、氮气保护系统。

2、触摸屏控制。

3、减速箱传动（低速由小电机拖动）。

1、nitrogen protectionsystem.

2、touch screen control.

3、drive of deceleration box (low speed isdriven by small motor).

■技术参数technicalparameters