双90℃折边及四边冲孔一次成型先进工艺，地处华东水箱

设备名称装配式不锈钢水箱型号-额定容量-（l）规格580t以后额定输出功率-（kw）电压110/220（v）冷却方式-运行方式-保护功能-显示-

一．装配式不锈钢水箱

fabricated stainless water tank

装配式水箱五大特点fivefeatures of

fabricated water tank

●拨冗出新、化繁为简rejectthe useless procedure, simplify and better theproduction
传统水箱多以焊接见长,但无论何种形式的焊接,继后的晶间腐蚀总是排除不了的质量隐患,常见的焊缝撕裂、拉筋断开、箱体膨胀变形甚至解体,均缘由焊缝腐蚀所致,而装配式水箱全部施以标准件作业,既简约了现场施工焊机、氩气、焊接作业的诸多繁锁,又杜绝了焊接产生的晶间腐蚀,不锈钢螺栓和无毒无害的食用硅胶密封垫,确保成型后的水箱无渗、无漏、无跑冒;
the traditional water tank excels at welding,but in any form ofwelding,you can not get rid of the safety potential causedby following intercrystalline corrosion.the usual safetyproblems,such as crack of the weld seam,lacing wire broke,dilatancyof the box,even disassembly ,all due to weld decay.the newlyfabricated water tank is made by standard component,which can notonly simplify welden that carried out on sit operation,but alsocompletely eradicate intercrystalline corrosion caused bywelding.the stainless steel bolt andnonpoisonouseatablesilica gel make sure that the tank composite unpermeability,watertight and leakage.
●经济实惠、款式新颖cost-effectiveand style novel
利用较少的材耗,精密的成型模压,不锈钢板材经液压拉伸成单元矩形凹凸板块,规格为1.0m*1.0m、1.0m*0.5m、0.5m*0.5m,任意组装成如你所需的储水容积,产品优美的外形极具时代特征,与现代建筑相得益彰;
with less material and delicate compression moulding,stainlessstell sheets can form many rugged rectangular elements by hydraulicpressure.these specifications are 1.0 m *1.0m、1.0m*0.5m、0.5m*0.5m.thesecan be assembled into any kind of cubage for water receving as youwant.the graceful shape has the stamp of the age and matches modernarchitecture greatly.
●经久耐用、防腐抗裂durable andanti-corrosion cracking
产品材质选用不锈钢板,经模压变形达到的强度效果,其优异的奥氏体、铁素体、超低碳诸多性能,具有独特的耐腐蚀、抗震、抗裂变之优点,产品整体使用寿命可长达30-50年;
we adopt the stainless steel of high which obtain excellentintensity after deformation by mould pressing.the water tankcomposite austenite,ferrite and tinb.it can prevent corrosion andbreak,also improve seismic.its has a long service life which can beup from 30 to 50 years.
●拆装便捷、保值率高easy dissemblyand high value-preserving rate
传统水箱缘由焊接成型,拆除时困难较多,特别是解体后的板块多以废料处置,而装配式水箱得益于标准件的连接,拆装便捷,尤其是拆除后的模块可以异地再用,保值回收,性价比彰显;

because of thatthe traditional water tank is linked by welding,it has lots ofdifficults when disassembling.particularly,steel sheets taken apartform the water tank always treated as waste. the fabricated watertank use standard components,which can be easily formed andrecycled.it has a good cost performance.
●成型迅速、节约工期fastassembly, shorten the process
传统水箱从基础型钢开始到模板的组合及各开孔的位置、附件的完善均以满焊连接来完成,而装配式水箱从基础到模板的组装、附件的配置均施以标准件的标准化作业,两者相比较,压缩工期至少50%以上。
structive steel,combined plate,arrangement of attachment andlocation of open pore,all of that are connected by full-lengthmelding in traditional water tank.but the fabrtcated water tank ismade by standard component.comparing this with that,the period isreduced by 50% at least.