日本大金PTFE M-18 耐化学腐蚀性PTFE

执行质量标准

国标

特性级别

耐磨抗腐蚀

用途级别

注塑级耐磨产品

规格级别

注塑级

可售卖地

全国

材质

ptfe

类型

标准料

daikin ptfe (polytetrafluoroethylene)molding powders are excellent, fine cut resins, well suited for avariety of demanding chemical, mechanical, electrical and non-sticksurface applications. these ptfe resins are fully fluorinated andhave the best thermal, electrical, and chemical properties of allfluoropolymers with a continuous service rating of 500°f (260°c).daikin ptfe molding powders are available in homopolymer andmodified fine cut grades.daikinptfe molding powders can be used continuously at temperatures up to260°c (500°f) and for short periods of time at higher temperatures.they also possess excellent low temperaturestrength.daikin ptfe moldingpowders are completely inert to attack by all chemicals excepthightemperature, high-pressure elemental fluorine gas, moltenalkaline metals and chlorine trifluoride.the non-polar molecular structure makes daikin ptfemolding powders ideal for use asuency insulatingmaterial. the dielectric constant and dissipation factor areuniformly low over a wide frequency range.under ordinary conditions of use, daikin ptfemolding powders possess the lowest coefficient of friction of anysolid material. also, the non-stick properties of these productsprevent most materials from adhering to them.chemical/mechanical—packings, gaskets, diaphragms,bellows, corrosion-resistant linings, piping components, pumpparts, o-rings, v-rings, bushings, slide bearings,etc.electrical/other—insulatingskived tape, insulating sleeves, terminals, connectors, sockets,spacers, electronic parts, laboratory e, etc.