100-277V 过UL认证LED灯管1800MM 24W

类型led日光灯管型号fy-t8-408外径尺寸d26*1800（mm）灯光颜色白材质pc+铝材供电电压100-277（v）功率24（w）光通量2200（lm）寿命100000（h）

fy lighting co.,ltd.

productinstruction

led t8tube

tel:86-755-61190333 ext818 fax: 86-755-61190333-817

websit:www.ledtubeschina.come-mail: seven.fy@fenyonglighting.com

address:5thf, block f, weiye innovation industrial, hangchengrd., bao an district, shenzhen, china.

ⅰ.generaldescription

led tubelight adopts the new type led as the light source, high efficiencyand energy-saving; using the standard t8 tube’s end caps, makes iteasy to install and replace the traditional fluorescentlamp.

the reflector kit is t8 ledtube lamp; the rating is100~277vac, 60 hz, 9 w for modelfy-t8-600,14w for model,fy-t8-900, 18w for model fy-t8-1200, 22wfor model fy-t8-1500,24w for model. fy-t8-1800 retrofit kitconsists of led tube lamp (1 pc), installation instruction (1pc).

this product must be installedin accordance with the applicable installation code by a personfamiliar with the construction and operation of the product and thehazards involved.

warning – risk of fire orelectric shock. install these kits only in the luminaries that hasthe construction features and dimensions shown in the photographsand/or drawings.

do not make or alter any openholes in an enclosure of wiring or electrical components during kitinstallation.

warning - risk of fire orelectric shock. reflector kit installation requires knowledge offluorescent lighting luminaries electrical systems. if not, do not attempt installation. contact a electrician.

warning – to prevent wiringdamage or abrasion, do not expose wiring to edges of sheet metal orother sharp objects.

warning - risk of fire orelectric shock. the electrical rating of these productsare100~277vac, the installer must determine whether they have100~277vac at the luminaire before installation.

“the retrofit assembly isaccepted as a component of a fluorescent luminaire where thesuitability of the combination shall be determined by csa orauthorities having jurisdiction.”

the end retrofit luminaire hasbeen modified and can no longer operate the originally intendedlamp.

do not use withdimmer.

do not use in totally enclosedluminaires.

this device is not intendedfor use with emergency exits.

these lamps works on linevoltage and require all ballasts and starters to be removed beforethe bulb is to be installed in the fixture.

only use in 1-lampsurface-mounted style luminaire.

retrofit used without lensluminaries.

use in drylocations.

outsidemeasurement: