PC南沙D151RC

pc南沙d151rc无卤阻燃v0

品牌：基础创新塑料(南沙)

牌号：d151-701

品名：pc

型号：d151-701

产品用途：塑胶制品厂

外形尺寸：25kg

生产企业：基础创新塑料(南沙)

货号：d151-701

是否进口：否

pc 基础创新塑料(南沙) d151-701

主要性能

1．机械性能：强度高、耐疲劳性、尺寸稳定、蠕变也小（高温条件下也极少有变化）；

2．耐热老化性：增强后的ul温度指数达120~140℃（户外长期老化性也很好）；

3．耐溶剂性：无应力开裂；

4．对水稳定性：高温下遇水易分解（高温高湿环境下使用需谨慎）；

5．电气性能：

6．绝缘性能：优良（潮湿、高温也能保持电性能稳定，是制造电子、电气零件的理想材料）；

7．介电系数：3.0—3.2；

8．耐电弧性：120s；

9．成型加工性：普通设备注塑或挤塑。

pc塑料的粘接

according to different needs, we can choose the following adhesive:1. g-933: one-component room temperature curing soft elasticanti-vibration adhesive, high and low temperature resistance,different viscosity bonding speed of a few seconds to several hourscuring. 2. kd-833 instant adhesive can bond pc plastic forseveral seconds or tens of seconds, but the adhesive layer is hardand brittle, not resistant to hot water immersion above 60n-505, two-component adhesive, soft adhesive layer, suitablefor large area bonding or composite of pc plastic. but the hightemperature resistance is poor. 4. qn-906: two component adhesive,high temperature resistant. 5. g-988: one-component roomtemperature vulcanizate, after curing, the elastomer haswaterproof, anti-vibration adhesive, high and low temperatureresistance, 12 mm thickness, about 10 minutes initial curing, 5 ~ 6hours basic curing, a certain strength. full cure takes at least 24hours. single component, no mixing re after extrusion, smearand stand, no heating re 6. kd-5606: uv curing adhesive,bonding transparent ps sheet and plate, can achieve no traceeffect, need to use uv light curing. beautiful after-gluing effect.but the high temperature resistance is poor.